The FGM 62 T provides the perfect solution for a multitude of applications. It is equally at home as a presentation mic where a lectern is not required or where an elaborate lectern is unable to accommodate a gooseneck attachment, a choir mic for discrete and accurate amplification of a choir ensemble, front of stage in order to pick up stage productions where close micing is not an option or as a supplement to the stage mics, any situation where spot or ambient pick up is required for instruments or orchestras or close micing of an operatic performance. Our ‘T’ version boasts a 1/2″ gold plated capsule which is able to capture every nuance of audio and excels where audio quality is paramount.

The FGM 62T has an adjustable upright stand of up 62cm and a carbon boom length of 1.2m. The carbon boom is attached to the stand upright using a shock mount and the boom can be slid through the shock mount to allow perfect positioning.

It has a premium 1/2″ gold plated capsule with a cardioid pickup pattern, It is terminated with a standard male XLR connector for professional onward connection.

• • *PHANTOM POWER REQUIRED*
  • 3 interchangeable capsules – Cardioid – Super Cardioid – Omni Directional
  • 1.2m Carbon Boom
  • Up to 62cm Upright Stand
  • Ability for Wireless Use using optional FGM GM KIT and JTS Body Pack Wireless System
  • 8m Cable Included
  • Frequency response: 20Hz – 20kHz
  • Sensitivity: -36Ôø?3 dB* (15.8mV) 0dB
  • Power Supply: 36~52VDC phantom power
  • Type Back: Elecret Condenser
  • Current Consumption: ‚â§3mA
  • Output: 3-pin XLR (power module)
  • Directional Pattern: Cardioid
  • Attenuation Switch: -10dB
  • Low Frequency Roll-Off: 80Hz
  • Impedance: 100Œ©
  • Max. SPL For 1% T.H.D.: 140dB
  • Signal To Noise Ratio: 78dB

See the ‘User Manuals’ tab on the left of this page – as manufacturers are making instruction sheets and user manuals available for download only and your purchase may not include a printed version.

The post JTS FGM-62T Phantom Power Floor Stand Microphone appeared first on Sound Services.

The FGM 62 is the perfect multi use microphone. With 3 interchanegable capsules, a stand length of up to 62cm and a carbon length of 1.2m it is the workhorse of many schools, House Of Worship, rental and touring companies where mic pickup of speech, singing, instruments, choirs or orchestras is required. The FGM 62 provides the perfect solution for a multitude of applications. It is equally at home as a presentation mic where a lectern is not required or where an elaborate lectern is unable to accommodate a gooseneck attachment, a choir mic for discrete and accurate amplification of a choir ensemble, front of stage in order to pick up stage productions where close micing is not an option or as a supplement to the stage mics, or any situation where spot or ambient pick up is required for instruments or orchestras. The FGM 62 has an adjustable upright stand of up 62cm and a carbon boom length of 1.2m. The carbon boom is attached to the stand upright using a shock mount and the boom can be slid through the shock mount to allow perfect positioning. It is supplied with 3 interchangeable capsules giving cardioid, supercardioid and omnidirectional pick up patterns, an 8m cable and the ability to go wireless using the optional FGM-GM-KIT and any JTS beltpack wireless system.

• 3 interchangeable capsules – Cardioid – Super Cardioid – Omni Directional
• 1.2m Carbon Boom
• Up to 62cm Upright Stand
• Ability for Wireless Use using optional FGM GM KIT and JTS Body Pack Wireless System
• 8m Cable Included
• Frequency response: 50Hz – 18kHz
• Power supply: 9-52V DC Phantom Power (LED standard operation voltage 48V)
• Microphone type: Back Electret Condenser
• Polar pattern: Cardioid, Supercardioid, Omni-directional (Capsule dependant)
• Impedance: 220Œ©
• Sensitivity (at 1kHz): -56Ôø?3 dB* (1.58mV)*0dB
• Max. SPL for 1% THD: 125dB
• Connector: 3 Pin Male XLR
• Cable length: 8m

See the ‘User Manuals’ tab on the left of this page – as manufacturers are making instruction sheets and user manuals available for download only and your purchase may not include a printed version.

The post JTS FGM-62 Floor Stand Microphone appeared first on Sound Services.

The automatic microphone mixers of the CS series are the perfect aid for concepts with multiple microphones, e.g. in conference rooms, churches or language laboratories. The main task of the mixer is to open the respective microphone channel when required and to close it again when the speaker has finished the presentation. This intelligent adjustment for the individual microphone channels allows for a silent and precise control which ensures that the audience hears every single word. This greatly improves the overall sound resulting in a clear, transparent reproduction and minimises acoustic feedback and irritating background noise. The CS mixers feature a last-in function in order to maintain a pleasant atmosphere with a soft ambient sound also during the breaks in conversation rather than just cutting off the sound.

• Automatic microphone mixer
• 4 channels
• 3 operating modes: auto mode, priority or 4/1-channel mixer
• Balanced XLR inputs, switchable mic/line
• 12 V phantom power
• Mix output, switchable mic/line
• Trigger outputs for external devices, e.g. warning devices, cameras or speakers
• Status LEDs
• Several devices can be combined via link connections (supplied with cable)
• Desktop metal housing
• 482 mm (19″) rack installation with supplied mounting brackets
• Mic input 0.2 mV/4.7 kΩ
• Line input 60 mV/20 kΩ
• Aux output 1 V/200 Ω
• Frequency range 35-20,000 Hz
• THD < 0.06%
• S/N ratio > 70 dB
• Power supply via encl. plug-in power supply
• Admissible ambient temperature 0-40 °C
• No. of channels 8
• No. of inputs 8
• Phantom power +48 V
• Width 420 mm
• Height 44 mm
• Depth 199 mm
• Weight 2.3 kg

See the ‘User Manuals’ tab on the left of this page – as manufacturers are making instruction sheets and user manuals available for download only and your purchase may not include a printed version.

The post JTS CS-8 Automatic Mixer appeared first on Sound Services.

The automatic microphone mixers of the CS series are the perfect aid for concepts with multiple microphones, e.g. in conference rooms, churches or language laboratories. The main task of the mixer is to open the respective microphone channel when required and to close it again when the speaker has finished the presentation. This intelligent adjustment for the individual microphone channels allows for a silent and precise control which ensures that the audience hears every single word. This greatly improves the overall sound resulting in a clear, transparent reproduction and minimises acoustic feedback and irritating background noise. The CS mixers feature a last-in function in order to maintain a pleasant atmosphere with a soft ambient sound also during the breaks in conversation rather than just cutting off the sound.

• Automatic microphone mixer
• 4 channels
• 3 operating modes: auto mode, priority or 4/1-channel mixer
• Balanced XLR inputs, switchable mic/line
• 12 V phantom power
• Mix output, switchable mic/line
• Trigger outputs for external devices, e.g. warning devices, cameras or speakers
• Status LEDs
• Several devices can be combined via link connections (supplied with cable)
• Desktop metal housing
• 482 mm (19″) rack installation with supplied mounting brackets
• Mic input 0.2 mV/4.7 kΩ
• Line input 60 mV/20 kΩ
• Aux output 1 V/200 Ω
• Frequency range 35-20,000 Hz
• THD < 0.06%
• S/N ratio > 70 dB
• Power supply via encl. plug-in power supply
• Admissible ambient temperature 0-40 °C
• No. of channels 4
• No. of inputs 4
• Phantom power +12 V
• Width 200 mm
• Height 44 mm
• Depth 212 mm
• Weight 1.4 kg

See the ‘User Manuals’ tab on the left of this page – as manufacturers are making instruction sheets and user manuals available for download only and your purchase may not include a printed version.

The post JTS CS-4 Automatic Mixer appeared first on Sound Services.

System includes:

• 1 x IMG Stageline TXS-686 receiver
• 8 x IMG Stageline TXS-606DT/2 desk microphone transmitters
• 8 x XLR leads
• 1 x JTS CS-8 automatic mixer
• 1 x 1U blank panel
• 1 x Chord RACKBAG4U 4U rack bag
• 2 x Citronic CAB-10L active speakers
• 2 x 20m XLR to XLR speaker link lead
• 1 x STS-1 speaker stand set

This wireless microphone system offers great value for money and is ideal for schools, colleges, stage, amateur dramatics, entertainers and smaller theatres

IMG Stageline TXS-686 receiver

• 1,000 selectable UHF frequencies on channels 46, 47 and 48 (672.000-696.975 MHz) 10 groups with 100 channels each
• ACT function for transmitting the selected frequency to pocket transmitter TXS-606LT or hand-held microphone TXS-606HT via infrared signal
• Automatic scan
• True diversity system with removable antennas (BNC connection)
• Volume and squelch can be adjusted for each channel
• LCD for group/channel, antenna A/B, RF transmitting level, AF audio level and additional LED level display for audio level of each channel
• Balanced XLR outputs
• 6.3mm output for mixed signal outputs
• Stable metal housing
• Supplied with PSU
• 482mm (19″) 2u rack installation
• Carrier frequency range: 672.000-696.975 MHz
• Audio frequency range: 30-18,000 Hz
• Channels: 8
• THD: < 0.5%
• Dynamic range: 100 dB
• RF S/N ratio: 105 dB
• Admissible ambient temperature: 0-40 °C
• Audio signal receiver: 350 mV/600 Ω (jack) 25 mV/600 Ω (XLR, balanced)
• Power supply receiver: via encl. plug-in power supply
• Width receiver: 482 mm
• Height receiver: 90 mm
• Depth receiver: 195 mm
• Weight receiver: 4.4 kg
• Connections receiver: 8 x XLR, balanced, 1 x 6.3 mm jack, unbalanced

IMG Stageline TXS-606DT/2 desk microphone transmitters

• Desk microphone transmitter with gooseneck and PTT switch
• Electret microphone cartridge, cardioid polar pattern
• 350 mm gooseneck, removable
• 1,000 selectable UHF frequencies (672.000-696.975 MHz), can be synchronised with receivers TXS-606, TXS-626, TXS-646 or TXS-686 via ACT function
• Adjustable sensitivity
• Switchable transmitting power (high: 25 mW/low: 2.5 mW)
• LCD for indicating group/channel, audio level and battery status
• Power supply via 2 x 1.5 V battery AA size (not supplied)
• Type: desktop microphone transmitter
• Transmission method: wireless
• Polar pattern: cardioid
• System: electret
• Carrier frequency range: 672.000-696.975 MHz
• Transmitting power: 25 mW/2.5 mW
• Power supply: 2 x 1.5 V battery AA size
• Operating time: > 8 h
• Audio frequency range: 30-18,000 Hz, ±3 dB
• Dimensions: 120 x 65 x 178 mm (without gooseneck)
• Weight: 600 g

JTS CS-8 automatic mixer

The Automatic Microphone Mixers of the CS series are THE perfect aid for concepts with multiple microphones, e.g. in conference rooms, churches or language laboratories. The main task of the mixer is to open the respective microphone channel when required and to close it again when the speaker has finished the presentation. This intelligent adjustment for the individual microphone channels allows for a silent and precise control which ensures that the audience hears every single word. This greatly improves the overall sound resulting in a clear, transparent reproduction and minimises acoustic feedback and irritating background noise. The CS mixers feature a last-in function in order to maintain a pleasant atmosphere with a soft ambient sound also during the breaks in conversation rather than just cutting off the sound.

• Automatic microphone mixer
• 4 channels
• 3 operating modes: auto mode, priority or 4/1-channel mixer
• Balanced XLR inputs, switchable mic/line
• 12 V phantom power
• Mix output, switchable mic/line
• Trigger outputs for external devices, e.g. warning devices, cameras or speakers
• Status LEDs
• Several devices can be combined via link connections (supplied with cable)
• Desktop metal housing
• 482 mm (19″) rack installation with supplied mounting brackets
• Mic input 0.2 mV/4.7 kΩ
• Line input 60 mV/20 kΩ
• Aux output 1 V/200 Ω
• Frequency range 35-20,000 Hz
• THD < 0.06%
• S/N ratio > 70 dB
• Power supply via encl. plug-in power supply
• Admissible ambient temperature 0-40 °C
• No. of channels 8
• No. of inputs 8
• Phantom power +48 V
• Width 420 mm
• Height 44 mm
• Depth 199 mm
• Weight 2.3 kg

Chord RACKBAG4U 4U rack bag

19″ rack case in a padded bag with front and rear flaps for access and ventilation. Equipment is protected by an inner wooden frame and secured by metal rack strip front and rear. Also fitted with carrying handle, shoulder strap and zipped outer pocket.

• Sturdy internal wooden frame
• Rack strip front and rear
• Securing straps inside flaps
• Zipped external pocket
• Rack mounting depth: 350mm
• Rack height: 4U (176mm)
• Rack mounting depth: 328mm
• External dimensions: 550 x 380 x 250mm
• Weight: 4.86kg

Citronic CAB-10L active speakers

Active PA speakers with Bluetooth wireless connection and stereo link capability, housed in a compact and lightweight moulded polypropolene enclosure. Custom designed low and high frequency drivers are powered by a class D digital amplifier circuit for powerful and energy-efficient performance. A switchable mic/line input and separate line input are provided along with a Bluetooth receiver for playback from a smart phone or tablet. The BT section also has a link function which allows wireless connection to another CAB series speaker to form a stereo pair

These versatile speakers achieve maximum sound output with minimal size, weight and setup time

• Supplied singly – two CAB Series speakers can be wirelessly linked to form a stereo pair
• Bluetooth receiver with stereo link capability
• Digital amplifier for lightweight & efficient performance
• Integral top and side carry handles
• 2 inputs with separate volume control
• 35mm pole mount
• Frequency response: 58Hz – 19kHz
• Output power: 220w RMS
• Max. SPL: 132dB
• Main driver: 250mmØ (10″) woofer
• Voice coil: 38mmØ (1.5″)
• Crossover frequency: 3.2kHz
• Dimensions: 530 x 310 x 300mm
• Weight: 11.2kg

This equipment requires an annual fixed site wireless microphone licence when used in the UK.

Wireless microphone systems require knowledge of OFCOM licensing and the working practices and requirements when using multiple wireless microphones simultaneously and systems should be installed and set-up by experienced users

Please note that a maximum of 12 x TXS-606 series wireless microphone transmitters can be used with the appropriate number of TXS-606, TXS-626, TXS-646 or TXS-686 receivers at any one time.

Wireless microphone transmitters will only work with their matching wireless microphone receivers from that manufacturers matching range of equipment. Digital wireless microphone transmitters and receivers are not compatible with or suitable for use as spare components in older analogue wireless microphone systems and vice-versa.

Wireless microphone systems need to be connected to a public address PA sound system to work.

See the ‘User Manuals’ tab on the left of this page – as manufacturers are making instruction sheets and user manuals available for download only and your purchase may not include a printed version.

The post Wireless Microphone Conference System with Active Speakers for Council Meetings and Public Inquiries appeared first on Sound Services.

Available as:

• CM-825iB: Black
• CM-825iF: Beige/Ivory

The CM-825i is a dual ear hook sub miniature Omni Directional Microphone headset. 50-18,000 KHz.Designed with a condenser capsule of diameter 2.5mm using JTS advanced electret condenser microphone technology making it ideal for theatre, production and broadcasting. Supplied with 4 pin mini XLR connection for JTS wireless microphone systems

• Fitted with a 4 pin mini XLR plug for JTS wireless microphone transmitters
• Frequency Response 50 ~ 18,000Hz
• Polar Pattern Omni-directional
• Sensitivity (at 1KHz) -53±3 dB* (2.24mV)*0dB=1V/μbar
• Impedance 1.2kΩ
• Max. SPL for 1% THD 130dB
• Colour: Black / Beige

See the ‘User Manuals’ tab on the left of this page – as manufacturers are making instruction sheets and user manuals available for download only and your purchase may not include a printed version.

The post JTS CM-825i Series Discreet Headmics appeared first on Sound Services.

The JSS-20 is the perfect partner for the UF-20S and UF-20R. It utilises the JTS SAM-8WLN dynamic capsule and benefits from our latest class leading technology to ensure rock solid RF. Many high end features are incorporated including Low Cut function, the ability to name the transmitter, slot in charger option and interchanegable capsules with the option to use some classic capsules. The JSS-20 comes fitted with JTS’ newest development SAM-8WLN capsule that assures outstanding acousti performance while minimizing touch noise. The JSS-20 features an interchangable capsule design enabling the engineer or performer to place their favoured capsule choice in the JSS-20 transmitter body, allowing for a truly unique and personal sound. The JSS-20 is also rechargeable with the CH-2 and CH-8 wireless charging stations. It is designed with a slot-in charging feature with two AA NiMH rechargable batteries (not included). A sliding cover design is applied to prevent the user or performer from touching the setting keys unintentionally, it also hides away the options to change these settings.

• • 2400 to 3000 selectable frequencies
  • Carrier Frequency: 606-681 MHz
  • Preset 15 groups each of up to 63 compatible channels
  • Phase-Locked Loop (PLL) synthesized tune
  • Adjustable transmission power between Low and High
  • Low cut function
  • JTS newest development SAM-8WLN capsule assures outstanding acoustic performance while minimizes touching noise
  • Interchangeable capsule design for various choices including some classic capsule modules
  • It is designed with slot-in charging feature with two AA NiMH rechargeable batteries

Wireless microphone transmitters will only work with their matching wireless microphone receivers from that manufacturers matching range of equipment. Digital wireless microphone transmitters and receivers are not compatible with or suitable for use as spare components in older analogue wireless microphone systems and vice-versa

Wireless microphone systems need to be connected to a public address PA sound system to work

See the ‘User Manuals’ tab on the left of this page – as manufacturers are making instruction sheets and user manuals available for download only and your purchase may not include a printed version

The post JTS JSS-20 Handheld Wireless Microphone appeared first on Sound Services.

The CM-501 is an Uni directional Electret lavalier / lapel / tie clip microphone, perfect or presentations and discussions. Secure fit is ensured due to the supplied tie clip, making it easy to attach and detatch. Cardioid polar pattern. 100-15,000KHz. Supplied with windshield.

• Fitted with a 4 pin mini XLR plug for JTS wireless microphone transmitters
• Uni-direction for high-quality voice pick-up
• Wide dynamic range and frequency response for excellent sound reinforcement
• Small size for minimum visibility
• Together with clip for easy attaching to a tie, lapel, dress etc.
• Frequency response: 100Hz – 15kHz
• Net Dimension (WxHxD): 10.1mm(W) x 26.4mm(H)
• Net Weight: 21.5g
• Polar Pattern: Cardiod
• Impedance: 2.2kΩ
• Sensitivity (at 1kHz): -60±3 dB* (1mV)*0dB
• Max. SPL for 1% THD: 130dB
• Connector: 4 Pin Mini XLR

See the ‘User Manuals’ tab on the left of this page – as manufacturers are making instruction sheets and user manuals available for download only and your purchase may not include a printed version.

The post JTS CM-501 Clothing Clip Microphone appeared first on Sound Services.

The CS-W4 wireless microphone conference system uses our latest technology to build a modular conference system which grows with your increasing needs. Offering 4 channels of wireless conference, more receiver units can be cascaded from the master using built-in antenna and mains distribution. With the W4-CH12 charging case, the CS-W4 system offers the ultimate of versatility, ease of use and price. The CS-W4T is the wireless conference microphone and transmitter for the CS-W4C. Incredibly easy to set up using Patended 2.4GHz REMOSET technology. Any microphone can be programmed to be chairman or delegate unit. Single or 12 way charging station available.

System Includes:

• 1 x CS-W4C wireless conference receiver
• 4 x CS-W4T wireless conference microphone
• 4 x XLR leads

CS-W4C

• Frequency oscillation: PLL Synthesized Control
• Carrier frequency: 470~960 MHz
• No. of channels: 4 channels
• Channel pairing: RF 2.4G (Remoset)
• Diversity antenna: diversity
• Bandwidth: 36MHz
• Signal/noise ratio: >105dB(A)
• Total harmonic distortion: <0.6%@1KHz
• Sensitivity: -95dBm，S/N>80dB
• Audio frequency response: 60Hz~16KHz±2dB
• Antenna connector: BNC female
• Antenna booster power: DC12V/100mA
• Display: LCD+LED
• Controls: Power On/Off, Groups, Channels, Frequency, Sensitivity, Key Lock, Volume, Output Attenuation (Xlr), Frequency Scan (On/Off), Antenna Power, Display Setting, Priority Setting, Remoset Id
• Number, Remoset Setting
• Audio output level (MAX): ψ6.3 Phone Jack：+4dBu, XLR Jack：+10dBu(Line)、-10dBu(MIC)
• Audio output impedance: 600Ω
• Mute: Noise mute and Pilot Tone
• Output port: 5 balance XLR ports, 1 unbalance φ6.3mm jack
• Logic Controller & Voltage Output: +5Vdc
• Automix Control Socket: in/out (8 pin mini DIN connecter)
• Power: AC 100~240 VAC
• Dimensions: 485mm L x 260mm W x 45mm H
• Weight: 2.4 kg
• Note: Actual Product specifications may vary depending on model and region

CS-W4T

• (This wireless microphone can also be used with the JTS R-4 wireless receiver to provide wireless gooseneck microphone)
• Frequency oscillation: PLL Synthesized Control
• Carrier frequency: 470~960MHz
• Bandwidth 108MHz (MAX): Pairing 2.4G RF (Remoset)
• RF power output: Low / High
• RF stability: <±10KHz＠Fc
• Frequency deviation: ±48KHz
• Spurious Emissions: <-50dBc
• Display: LCD
• Controls: Power ON/OFF, Talk, groups, channels, frequency, sensitivity adjustment, Remoset ID pairing, RF output, key lock, Low cut, Sync
• Battery: UM3, AA x 2
• Charging: Yes
• Dimension: 138mm(D)x 116mm(W)x 29mm(H)
• Weight: 0.76 kg
• Note: Actual Product specifications may vary depending on model and region

Sound Services deliver this conference wireless microphone set without extra charge to most mainland UK addresses

Wireless microphone systems require knowledge of OFCOM licensing and the working practices and requirements when using multiple wireless microphones simultaneously and systems should be installed and set-up by experienced users

Wireless microphone transmitters will only work with their matching wireless microphone receivers from that manufacturers matching range of equipment. Digital wireless microphone transmitters and receivers are not compatible with or suitable for use as spare components in older analogue wireless microphone systems and vice-versa

Please note that a maximum of 12 x CS-W4T series wireless microphone transmitters can be used with the appropriate 3 x number of CS-W4C receivers at any one time

Wireless microphone systems need to be connected to a public address PA sound system to work

See the ‘User Manuals’ tab on the left of this page – as manufacturers are making instruction sheets and user manuals available for download only and your purchase may not include a printed version

Not quite right for you?
Ask us to quote a custom PA sound system

The post JTS CS-W4 Series Conference Wireless Microphone Set for Meetings and Council Chambers appeared first on Sound Services.

The CS-W4T is the wireless conference microphone and transmitter for the CS-W4C. Incredibly easy to set up using Patended 2.4GHz REMOSET technology. Any microphone can be programmed to be chairman or delegate unit. Single or 12 way charging station available. This unit can also be used with our R-4 wireless receiver to give wireless gooseneck microphone.

If you wish to operate within Ch. 38 you can have a maximum of three CS-W4 systems can be cascaded (12 mics) – to use more mics you will need additional Ofcom licences

• Frequency oscillation: PLL Synthesized Control
• Carrier frequency: 470~960MHz
• Bandwidth 108MHz (MAX): Pairing 2.4G RF (Remoset)
• RF power output: Low / High
• RF stability: <±10KHz＠Fc
• Frequency deviation: ±48KHz
• Spurious Emissions: <-50dBc
• Display: LCD
• Controls: Power ON/OFF, Talk, groups, channels, frequency, sensitivity adjustment, Remoset ID pairing, RF output, key lock, Low cut, Sync
• Battery: UM3, AA x 2
• Charging: Yes
• Dimension: 138mm(D)x 116mm(W)x 29mm(H)
• Weight: 0.76 kg
• Note: Actual Product specifications may vary depending on model and region

Wireless microphone systems require knowledge of OFCOM licensing and the working practices and requirements when using multiple wireless microphones simultaneously and systems should be installed and set-up by experienced users

Wireless microphone transmitters will only work with their matching wireless microphone receivers from that manufacturers matching range of equipment. Digital wireless microphone transmitters and receivers are not compatible with or suitable for use as spare components in older analogue wireless microphone systems and vice-versa

Wireless microphone systems need to be connected to a public address PA sound system to work

See the ‘User Manuals’ tab on the left of this page – as manufacturers are making instruction sheets and user manuals available for download only and your purchase may not include a printed version

The post JTS CS-W4T Wireless Conference Microphone appeared first on Sound Services.