LOSUB is designed to offer a high power subwoofer unit with compact dimensions compared with traditional subs. Employing a downward angled baffle, the LOSUB creates a pressure zone at ground level and ports this forward, meaning that the driver is positioned to operate in a smaller enclosure. Sitting on the ground, the cabinet is just 36cm high and has a 35mm pole mount for adding a satellite full-range speaker. This low profile also enables the cabinet to fit under or beside furnishings and in narrow spaces for installation. The input section has 2 independent inputs and outputs for stereo link to a pair of active tops in a 2.1 configuration and there is an adjustable low pass filter and boost function to provide the right amount of sub output as needed. Whether is it for space-saving during transit or storage or for building into discreet spaces for installation, the LOSUB provides hefty power without eating up all your room.

• Semi-directional ported design
• Compact dimensions
• Stereo in/out for 2.1 operation
• Power supply: 230Vac, 50Hz (IEC)
• Construction: MDF enclosure with polyurea finish
• Hardware: Routed handles & 35mm pole mount socket
• Amplifier construction: Class-D (fixed DSP)
• Inputs: 2 x balanced XLR / 6.3mm jack
• Outputs: 2 x balanced XLR
• Controls: Flat/boost, phase switch, frequency, subwoofer level
• Driver: 380mmØ (15″) sub woofer
• Voice coil: 75mmØ (3″)
• Magnet: 2.835kg (100oz)
• Output power:
  • RMS: 600W
  • Max: 1200W
• Frequency response: 40 – 120Hz
• Sensitivity @ 1W/1m: 96dB
• SPL max.: 127dB
• Dimensions: 550 x 480 x 360mm
• Weight: 24kg

See the ‘User Manuals’ tab on the left of this page – as manufacturers are making instruction sheets and user manuals available for download only and your purchase may not include a printed version.

The post Citronic LOSUB-15A Active Subwoofer appeared first on Sound Services.

Dual driver active subwoofer cabinet with internal amplifier for mobile and fixed sound reinforcement. Inputs and outputs for 2 channels can be used for independent signals, enabling a 2.1 system setup with 2 full-range cabinets. Each input has independent level control, giving the option of adjusting the sub content for either channel at will. Preset DSP control accurately filters low frequencies to the class-D amplifier section to drive the twin 10″ woofers up to 600Wrms output. A phase switch can be used to correct time-alignment or out-of-phase situations. This sub unit can be positioned flat to accept a 35mm pole to mount a full-range speaker or upright for a smaller footprint. The form factor of this cabinet also makes it ideal for discreet installation.

• Independent 2 channel in/out connection
• Narrow footprint for discreet installation
• 600Wrms class-D amplifier
• Power supply: 230Vac, 50Hz (IEC)
• Construction: 15mm MDF with durable polyurea finish
• Hardware: Integral carry handle & 35mm pole mount socket
• Amplifier construction: Class-D
• Inputs: 2 x balanced XLR / 6.3mm jack
• Outputs: 2 x balanced XLR
• Controls: Flat/boost, phase switch, frequency, subwoofer level
• Drivers: 2 x 250mmØ (10″) woofers
• Frequency response: 55 – 150Hz
• Output power rms: 600W
• Output power max.: 1200W
• Dimensions: 690 x 480 x 305mm
• Weight: 31.0kg

See the ‘User Manuals’ tab on the left of this page – as manufacturers are making instruction sheets and user manuals available for download only and your purchase may not include a printed version.

The post Citronic CASA-210BA Active Subwoofer appeared first on Sound Services.

Monolith is an active subwoofer with inbuilt USB/SD player and Bluetooth®, powering a pole-mounted satellite column speaker to provide a convenient full-range PA set. This 3rd generation of the Monolith is driven from an efficient 400+100Wrms class-D amplifier section with bespoke DSP control, delivering powerful sub frequencies, punchy mids and sparkling highs. Supplied with a height adjustable 35mm pole and SPK link lead, each set can be used independently as a mono stack or in pairs or multiples for stereo or larger PA setups. The modular nature of this set makes it perfect for solo performers, DJ setups and conferences amongst many other applications.

• 500W class-D bi-amplifier
• Inbuilt USB/SD audio player
• Bluetooth connectivity
• Heavy duty wooden cabinets with Polyurea finish
• Supplied with adjustable 35mm pole and SPK link lead
• Power supply:230Vac, 50Hz
• Fuse: T3.15AL 250V (5 x 20mm)
• Construction: 15mm MDF with texture polyurea coating
• Output power (RMS): 400W + 100W
• Output power (max.): 1000W
• Audio source: Internal USB/SD/BT player
• Inputs: Switchable Mic (XLR/Jack) or Line (Jack/RCA)
• Controls: Gain, Sub-woofer level, Sub Boost switch, Mic/Line switch
• Outputs: Speaker out (SPK) to column, Line out (XLR)
• Sub driver: 1 x 300mmØ (12″)
• Column drivers: 4 x 100mmØ (4″) Ferrite, 1 x 25mmØ (1″) Neodymium
• Sensitivity: 103dB
• Frequency response: 35Hz – 20kHz
• Dimensions:
  • Sub cabinet: 480 x 450 x 380mm
  • Column: 580 x 140 x 115mm
• Weight:
  • Sub cabinet: 20.0kg
  • Column: 5.6kg

See the ‘User Manuals’ tab on the left of this page – as manufacturers are making instruction sheets and user manuals available for download only and your purchase may not include a printed version.

The post Citronic Monolith mk3 Active Sub and Column Array appeared first on Sound Services.

The Citronic Neolith mk2 delivers crystal-clear sound with a sleek active column array paired to a deep, punchy subwoofer—all powered by a built-in amplifier. Perfect for live gigs, DJ sets, or any event where crisp audio and easy setup are a must. Compact and lightweight, this dynamic duo includes all necessary cables and accessories, so you can hit the ground running—no fuss, no fussing. Whether you’re on stage or in the studio, expect bold, balanced sound that fills the room without weighing you down.

Neolith is a self-contained active sub & column speaker system that delivers superb sound quality for medium to high volume PA applications. Maintaining a minimal footprint, the compact sub cabinet is loaded with a high power 10″ low frequency driver, and is also home to the powerful class-D bi-amp module. For mid and high frequency reproduction, the column speaker has a quartet of high power full-range drivers, which have Neodymium magnets to maximise response and efficiency at these frequencies. Sub and column are assembled using a specially-designed mounting pole, which also serves to connect the column speakers to the amplifier output. This makes setting up and breaking down a matter of seconds for mobile work. The amplifier is also governed by a DSP circuit, offering 5 distinct tonal profiles that may be selected for different sound duties. Two input channels can each accept a line input with one switchable to Mic level, with the other also serving as an input for the inbuilt Bluetooth receiver. Convenience and ease of use are the key benefits of Neolith, providing power and great sound quality without fuss or frustration.

• Neodymium full-range drivers
• Self-contained active PA system
• Built-in Bluetooth receiver
• Speaker connection integral to mounting pole
• Finish: Black polyurea coating
• Power supply: 230Vac, 50Hz (IEC)
• Fuse: T3.15AL 250V (5 x 20mm)
• Construction: 15mm MDF with texture polyurea coating
• Output power (RMS): 400W
• Output power (max.): 800W
• Audio source: Internal Bluetooth receiver
• Inputs: Mic/Line(XLR/Jack) and Line (Jack/RCA)
• DSP settings: 5 x preset tone profiles
• Output: Line out (XLR)
• Sub driver: 1 x 250mmØ (10″)
• Column drivers: 4 x 90mmØ (3.5″) Neodymium
• Sensitivity: 94dB
• Frequency response: 55Hz – 20kHz
• Height: 1.72m (assembled)
• Sub Cabinet:
  • Dimensions: 450 x 400 x 320mm
  • Weight: 15.95kg
• Column:
  • Dimensions: 520 x 143 x 111mm
  • Weight: 2.95kg

See the ‘User Manuals’ tab on the left of this page – as manufacturers are making instruction sheets and user manuals available for download only and your purchase may not include a printed version.

The post Citronic Neolith mk2 Active Sub and Column Array appeared first on Sound Services.

Sound reinforcement loudspeaker with 100 V line transformer and low impedance. Based on our extensive experience in the sound sector, FONESTAR has created SONORA. SONORA is a series of speakers specially designed for PA, musical and background sound applications. Its excellent finish and elegant design allow perfect integration in any space. They are fully prepared for outdoor and marine environments use as they have a powder-coated aluminium grille and are waterproof (IP-66). Besides, SONORA delivers high sound quality with clear, distortion-free sound, with a wide frequency response. They include all the necessary accessories for easy and quick installation: weatherproofed adjustable fixing mount, stainless steel screws and steel safety cable. For public address and ambient sound applications in public places such as restaurants, cafés, supermarkets, shopping centres, etc.

• Features:
  • Active loudspeaker
  • Class D amplifier with passive speaker output
  • High sound quality, clear and distortion-free sound
  • Tone and volume controls
  • Mono/stereo selector
  • Automatic standby function
• Amplifier: 25 + 25 W RMS
• Loudspeakers:
  • 1 x 5 ¼” polypropylene woofer
  • 1 x 1″ tweeter
• Frequency Reposnse: 80-20.000 Hz
• Inputs:
  • 1 stereo aux, 3.5 mm jack (unbalanced) or euroblock (balanced), 750 mV RMS
  • 1 x RJ-45 (future applications)
• Outputs: 1 passive loudspeaker, 8 Ω, euroblock
• Controls: Volume
• Tone: bass and treble
• Mono/stereo selector
• Material:
  • ABS
  • Aluminium grille
  • Stainless steel screws
• Temperature Range: -10ºC ~ 60ºC
• Colour: Black (RAL 9004) or White (RAL 9003)
• Power Supply:
  • 230 V AC, 60 W
  • 115 V AC upon request
• Dimensions:
  • Loudspeaker: 162 x 263 x 147 mm depth
  • Mount wall plate: 68 x 110 mm
  • Loudspeaker with mount: 216 mm depth
• Weigh: 2.7 kg
• Accessories:
  • Adjustable mounting bracket ± 60º in all directions.
  • Steel safety cable

See the ‘User Manuals’ tab on the left of this page – as manufacturers are making instruction sheets and user manuals available for download only and your purchase may not include a printed version.

The post Fonestar SONORA-5A Series Active Wall Cabinet Speakers appeared first on Sound Services.

Ideal sound kit for offices and home, in medium sized rooms, kitchens, etc., consisting of active speaker and passive speaker, with coaxial speakers with 6” wooofer and 1” tweeter. Enjoy high quality and powerful sound without distortion. It has several audio sources, Bluetooth receiver, USB player and auxiliary input, expanding its possibilities and allowing you to enjoy your music. You can receive music from your smartphone via Bluetooth. You can also play music from a USB or any other device with line level output connected to the auxiliary input. It allows you to limit the maximum volume to 50%, to ensure that there is no disturbance. In addition, it has a mono/stereo selector for different listening configurations. It allows to select 5 equalisations with the remote control to adapt the listening to the tastes of the listeners. Its frameless round aluminium grille speakers allow for easy integration into any space. It can be controlled by smartphone in Bluetooth mode or via the included remote control. Ideal for small sound systems in waiting rooms, small shops, offices, homes, etc.

• Features:
  • Pair of Bluetooth ceiling speakers
  • Active speaker with integrated amplifier and passive speaker output
  • Bluetooth receiver
  • USB player for mp3 and wav files
  • Line input
  • Automatic Standby function after 10 minutes without audio signal
  • Stereo or mono operation mode
  • Maximum volume limit between 100% and 50%
  • 5 selectable equalisations
  • High sound quality coaxial speakers
  • Frameless aluminium protective grille
  • Remote control included
• Bluetooth: Bluetooth 5.3
• Transmission distance: 10 m.
• Amplifier: 2 x 20 W RMS
• Loudspeakers: Coaxial: 6” woofer and 1” tweeter (active and passive) @ 8 Ω
• Controls:
  • Volume limiter (50% and 100%)
  • Stereo/mono selector
  • 5 Equalizations
  • USB playback mode (random, repeat all, repeat 1)
• Inputs: 1 stereo aux, euroblock
• Frequency Response: 60-20,000 Hz
• S/N RATIO: 92 dB
• Sensitivity: 89 dB @ 1W/1m
• Maximum Acoustic Pressure: 101 dB @ max W/1m
• Materials:
  • ABS enclosure
  • Frame-less aluminium round grille
• Connectors: Euroblock
• Colour: White (RAL 9003)
• Power Supply: 24 V DC, 3 A including adapter
• Dimensions:
  • Loudspeakers: 185 mm Ø x 75 mm depth
  • Cut-out hole: 170 mm Ø
• Weight: 1.5 kg
• Accessories:
  • Speaker cable: 5 m
  • Remote control receiver extension cable: 1 m
  • Remote control
  • Batteries for remote control

NOTE: Possibility to change Bluetooth ID and password with PC software.

See the ‘User Manuals’ tab on the left of this page – as manufacturers are making instruction sheets and user manuals available for download only and your purchase may not include a printed version.

The post Fonestar KS-12B Ceiling Speaker Set appeared first on Sound Services.

Ideal sound kit for office or home use, in medium-sized rooms, kitchens, etc., consisting of active loudspeaker and passive loudspeaker. The Class D amplifier offers high reliability and sound quality, and high efficiency. The speakers are coaxial with 6 1/2″ woofer and 1″ tweeter.

Enjoy powerful, high-quality sound.

Play music from your smartphone, tablet, Windows or Mac. You can stream music directly via Bluetooth or via Wi-Fi with App for smartphones and tablets (iOS and Android) that allows control and streaming of music content. It can connect to online music services and internet radio, allows you to play music while receiving calls or using your smartphone for other applications without sound or notifications being played on the loudspeakers. You can send the same music programme to several speakers at the same time in multi-room mode (see note), or play different music programmes on each speaker. You can also select a different volume for each speaker and customise its name, among other options.

In addition to the Bluetooth and Wi-Fi receiver, it has an auxiliary input for connecting another sound source. This great pair of speakers consists of an active loudspeaker with receiver and amplifier and a passive loudspeaker. Simple and elegant design that can be integrated into any environment. It is supplied with the necessary elements to start playing. Ideal sound kit for home and professional audio installations (offices, medium sized rooms, kitchens, waiting rooms, clinics, etc.).

• Features:
  • Pair of Wi-Fi and Bluetooth ceiling loudspeakers
  • Active loudspeaker with amplifier and output for passive loudspeaker
  • Play music from your smartphone, tablet, Windows or Mac (DLNA and Airplay compatible)
  • App for control from smartphones and tablets (iOS and Android), which allows connection to online music services and internet radio (WiiM)
  • Bluetooth receiver
  • Line input
  • Multiroom function (see note)
  • Frameless, low-profile grille
  • Remote control
• Bluetooth: 5.0 Bluetooth, 10 m transmission distance
• Amplifier: 2 x 25 W RMS
• Speakers: Coaxial: 6 ½” woofer, kevlar and 1″ tweeter (active and passive) @ 8 Ω
• Frequency Respnse: 80-20.000 Hz
• Inputs: 1 x stereo aux, 3.5 mm jack, 1 V RMS, 1 x RJ-45 Ethernet (Ethernet data connection)
• S/N Ratio: ≤ 92 dB
• Colour: White
• Power Supply: 24 V DC, 3 A with adapter included
• Dimensions:
  • Loudspeakers: 230 mm Ø x 160 mm depth
  • Cutting hole: 203 mm Ø
• Weight: 4 kg
• Accessories:
  • 5 m speaker cable
  • Remote control
  • Batteries for remote control

NOTE: Multiroom mode allows multiple speakers to play the same audio simultaneously by grouping them together easily from the APP. One of the speakers will be the main speaker and will be joined by the rest of the set. All slave loudspeakers must be connected to the master loudspeaker via the same media: Wi-Fi (priority if any speaker is connected to the Wi-Fi network) or Ethernet data cable (if no speaker is connected to WiFi). Via Wi-Fi, the slave loudspeakers will connect to the access point of the master loudspeaker, which creates its own network for the multiroom function. The slave loudspeakers must be within the range of the master loudspeaker network (approx. 5 – 7 m).

See the ‘User Manuals’ tab on the left of this page – as manufacturers are making instruction sheets and user manuals available for download only and your purchase may not include a printed version.

The post Fonestar KS-08WIFI Ceiling Speaker Set appeared first on Sound Services.

Active Speaker

Active ABS moulded speaker cabinet designed for multi-purpose sound reinforcement. Suitable for most applications from small church halls to schools, bars and clubs.

• Lightweight moulded ABS enclosure
• Titanium diaphragm compression driver
• Mic & Line inputs with level control
• Line out links
• Power & Clip LED indicators
• 35mm internal pole-mounting
• Switchable mains voltage (115/230Vac)
• Impedance: 4 Ohms minimum
• Driver Size: 12″
• Driver Power (RMS/Max): 180W/350W
• Frequency Response: 50Hz – 18kHz
• Amplifier Power (RMS): 150W
• SPL: 96dB
• Mic Inputs: Jack / XLR
• Line Inputs: RCA/XLR
• Line Outputs: Jack/XLR
• Dimensions (WxHxD): 465x664x375mm
• Weight: 17kg
• Supplied with IEC power lead and protective slip covers

Passive Speaker

ABS moulded, lightweight speaker cabinet designed for multi-purpose sound reinforcement. Suitable for most applications from small church halls to schools, bars and clubs.

• Lightweight moulded ABS enclosure
• Titanium diaphragm compression driver
• 35mm internal pole-mounting
• Driver Size: 12″
• Driver Power (RMS/Max): 180W/350W
• Frequency Response: 50Hz – 18kHz
• 2 Pole locking speaker connectors
• Dimensions (WxHxD): 465x664x375mm
• Supplied with speaker link lead and protective slip cover

All used and ex-display items are tried and tested before leaving our warehouse, but will have usage marks and some signs of wear – used, ex-display and clearance items include a 90 day return-to-base warranty

See the ‘User Manuals’ tab on the left of this page – as manufacturers are making instruction sheets and user manuals available for download only and your purchase may not include a printed version.

The post Pulse APS12SET 180W Speaker Set – Used appeared first on Sound Services.

Compact injection moulded speaker cabinet with built-in amplifier and input section. Independent microphone and line channels make the QRK series ideal for DJs, vocalists and karaoke setups.

• Microphone and line inputs with volume controls
• Titanium HF compression driver
• Compact moulded enclosure with carry handle
• Integral flying points and 35mmØ pole mount
• QR12K and QR15K models have additional echo effect and speaker output
• Power supply: 220-240Vac, 50/60Hz (fig.8)
• Woofer: 200mm (8”)
• Amplifier output power : rms: 40W
• Amplifier output power : max.: 60W
• Power handling : speaker max.: 80W
• Frequency response: 55Hz – 20kHz
• Dimensions : W(front/rear) x H x D: 290/150 x 400 x 220mm
• Weight: 6.5kg

See the ‘User Manuals’ tab on the left of this page – as manufacturers are making instruction sheets and user manuals available for download only and your purchase may not include a printed version.

The post QTX QR8K 40w Powered Speaker appeared first on Sound Services.

Active PA speakers with Bluetooth wireless connection and stereo link capability, housed in a compact and lightweight moulded polypropolene enclosure. Custom designed low and high frequency drivers are powered by a class D digital amplifier circuit for powerful and energy-efficient performance. A switchable mic/line input and separate line input are provided along with a Bluetooth receiver for playback from a smart phone or tablet. The Bluetooth section also has a link function which allows wireless connection to another CAB series speaker to form a stereo pair.

These versatile speakers achieve maximum sound output with minimal size, weight and setup time

• Supplied singly
• Two CAB Series speakers can be wirelessly linked to form a stereo pair
• Bluetooth receiver with stereo link capability
• Digital amplifier for lightweight & efficient performance
• Integral top and side carry handles
• 2 inputs with separate volume control
• 35mm pole mount
• Frequency response: 46Hz – 19kHz
• Output power: 350w RMS
• Max. SPL: 134dB
• Main driver: 380mmØ (15″) woofer
• Voice coil: 60mmØ (2.36″)
• Crossover frequency: 2.6kHz
• Dimensions: 695 x 420 x 390mm
• Weight: 17.6kg

Please note that wired inputs will not transmit via Bluetooth to the second speaker. Please see instruction manual for more information.

See the ‘User Manuals’ tab on the left of this page – as manufacturers are making instruction sheets and user manuals available for download only and your purchase may not include a printed version.

The post Citronic CAB-15L Active Cabinet Speaker with Bluetooth Link appeared first on Sound Services.