High efficiency, screw-on, 100V horn driver suitable for use with most public address horn flares fitted with a 1 3/8” – 18TPI thread. Manufactured using a die-cast aluminium chassis with a durable plastic rear cover, the drivers feature a flying lead and selectable output wattage taps.

• Power (RMS): 60W
• Power taps: 20W, 40W, 60W
• Impedance: 500KΩ, 250Ω, 170Ω
• Sensitivity: 114dB (when coupled to a CRSP55 horn)
• Frequency response: 150Hz – 6kHz
• Dimensions: 138 x 130mmØ
• Weight: 2.5kg

See the ‘User Manuals’ tab on the left of this page – as manufacturers are making instruction sheets and user manuals available for download only and your purchase may not include a printed version.

The post Clever Acoustics SHD 60 Screw On Horn Driver appeared first on Sound Services.

• 25 cm (10″) bass speaker and subwoofer of high power capability
• Heat-resistant voice coil and ventilated drive system
• Extra long excursion for a deep bass reproduction of high volumes
• Progressive cone suspension for a high operating reliability
• Robust diecast aluminium basket
• Ideally suited for compact subwoofers and 2-way systems with a crossover frequency of approx. 1,500 Hz to the tweeter
• Impedance (Z): 8 Ω
• Frequency range: f3-2,000 Hz
• Resonant frequency (fs): 47 Hz
• Power rating (RMS): 250 W
• Peak music power output (MAX): 500 W
• SPL: 94 dB/W/m
• Suspension compliance (Cms): 0.20 mm/N
• Moving mass (Mms): 51 g
• Mechanical Q factor (Qms): 6.16
• Electrical Q factor (Qes): 0.35
• Total Q factor (Qts): 0.33
• Equivalent volume (Vas): 40.7 l
• DC resistance (Re): 7.1 Ω
• Force factor (BxL): 18.30 Tm
• Voice coil induction (Le): 0.83 mH
• Voice coil diameter: Ø 75 mm
• Voice coil former: Kapton
• Linear excursion (XMAX): ± 7 mm
• Effective cone area (Sd): 380 cm2
• Magnet weight: 2 kg
• Magnet diameter: Ø 169 mm
• Mounting cutout: Ø 228 mm
• Mounting depth: 111 mm
• Dimensions: Ø 261 mm x 121 mm
• Outside diameter: Ø 261 mm
• Width: Ø 261 mm
• Depth: 121 mm
• Colour: black
• Admissible ambient temperature: 0-40 °C
• Weight: 5 kg

See the ‘User Manuals’ tab on the left of this page – as manufacturers are making instruction sheets and user manuals available for download only and your purchase may not include a printed version.

The post Monacor SP-10/250PRO Chassis Speaker appeared first on Sound Services.

Dual coaxial driver comprising a high power main woofer with a concentric tweeter driver covered by a mesh dust cap. Provides full range output with phase alignment for foldback or PA applications. A direct replacement for the CM-series active and passive wedge monitors.

• High power woofer with coaxial HF driver
• 8 Ohm
• Main driver: 250mmØ (10″) reinforced paper cone
• HF driver: 44mmØ (1.75″) Ti compression driver
• Impedance: 8 ohms
• Power handling : rms: 250W (LF), 40W (HF)
• Power handling : max: 500W (LF), 80W (HF)
• Sensitivity: 94dB (LF), 106dB (HF)
• Frequency response: 40Hz – 20kHz
• Dimensions: 165 x 250mmØ
• Weight: 1.8kg

See the ‘User Manuals’ tab on the left of this page – as manufacturers are making instruction sheets and user manuals available for download only and your purchase may not include a printed version.

The post Citronic LHF-CM10 Chassis Speaker appeared first on Sound Services.

A range of high-powered woofers with reinforced aramid fibre cones. Incorporating rubber surrounds, vented magnets and heat resistant 4 layer voice coils, these speakers can easily handle power peaks, yet produce a smooth sound that will please any Hi-Fi enthusiast.

• Aramid fibre cone
• Rubber surround
• Vented magnet
• 4 layer voice coil
• Black metal chassis
• Spade terminals
• Impedance: 8 Ohms
• Voice coil: 4 layer
• Power max.: 500W
• Power rms: 250W
• Overall depth: 95mm
• Magnet diameter: 140mmØ
• Mounting centres: 194mmØ
• Diameter: 200mm (8″)
• Frequency response: 27Hz – 6kHz
• Magnet weight: 91.1kg (40oz)
• SPL @ 1W/1m: 85.5dB
• Weight: 2.76kg

See the ‘User Manuals’ tab on the left of this page – as manufacturers are making instruction sheets and user manuals available for download only and your purchase may not include a printed version.

The post QTX QXW8 Chassis Speaker appeared first on Sound Services.

A range of high-powered woofers with reinforced aramid fibre cones. Incorporating rubber surrounds, vented magnets and heat resistant 4 layer voice coils, these speakers can easily handle power peaks, yet produce a smooth sound that will please any Hi-Fi enthusiast.

• Aramid fibre cone
• Rubber surround
• Vented magnet
• 4 layer voice coil
• Black metal chassis
• Spade terminals
• Impedance: 8 Ohms
• Voice coil: 4 layer
• Power max.: 250W
• Power rms: 125W
• Overall depth: 90mm
• Magnet diameter: 120mmØ
• Mounting centres: 157mmØ
• Diameter: 165mm (6.5″)
• Frequency response: 35Hz – 8kHz
• Magnet weight: 900g (30oz)
• SPL @ 1W/1m: 88dB
• Weight: 1.92kg

See the ‘User Manuals’ tab on the left of this page – as manufacturers are making instruction sheets and user manuals available for download only and your purchase may not include a printed version.

The post QTX QXW6 Chassis Speaker appeared first on Sound Services.

A range of high-powered woofers with reinforced aramid fibre cones. Incorporating rubber surrounds, vented magnets and heat resistant 4 layer voice coils, these speakers can easily handle power peaks, yet produce a smooth sound that will please any Hi-Fi enthusiast.

• Aramid fibre cone
• Rubber surround
• Vented magnet
• 4 layer voice coil
• Black metal chassis
• Spade terminals
• Impedance: 8 Ohms
• Voice coil: 4 layer
• Power max.: 200W
• Power rms: 100W
• Overall depth: 80mm
• Magnet diameter: 100mmØ
• Mounting centres: 122mmØ
• Diameter: 130mm (5.25″)
• Frequency response: 40Hz – 10kHz
• Magnet weight: 600g (20oz)
• SPL @ 1W/1m: 84.8dB
• Weight: 1.27kg

See the ‘User Manuals’ tab on the left of this page – as manufacturers are making instruction sheets and user manuals available for download only and your purchase may not include a printed version.

The post QTX QXW5 Chassis Speaker appeared first on Sound Services.

Replacement low frequency main drivers as used in Citronic CASA, CUBA and CLARA series passive cabinets.

• Direct replacements for CASA or CUBA series full range passive cabinets
• Construction: Reinforced paper cone with steel frame basket
• Impedance: 8 Ohms
• Power handling : rms: 400W
• Power handling : max: 800W
• Frequency response: 30Hz – 3kHz
• Voice coil: 64mmØ (2.5″)
• Magnet: 1.70kg (60oz)
• Sensitivity: 97dB
• Dimensions: 210 x 385mmØ
• Weight: 5.35kg

See the ‘User Manuals’ tab on the left of this page – as manufacturers are making instruction sheets and user manuals available for download only and your purchase may not include a printed version.

The post Citronic LFCASA-15 Chassis Speaker appeared first on Sound Services.

Replacement low frequency main drivers as used in Citronic CASA, CUBA and CLARA series passive cabinets.

• Direct replacements for CASA or CUBA series full range passive cabinets
• Construction: Reinforced paper cone with steel frame basket
• Impedance: 8 Ohms
• Power handling : rms: 350W
• Power handling : max: 700W
• Frequency response: 45Hz – 3kHz
• Voice coil: 64mmØ (2.5″)
• Magnet: 1.70kg (60oz)
• Sensitivity: 96dB
• Dimensions: 160 x 310mmØ
• Weight: 4.96kg

See the ‘User Manuals’ tab on the left of this page – as manufacturers are making instruction sheets and user manuals available for download only and your purchase may not include a printed version.

The post Citronic LFCUBA-12 Chassis Speaker appeared first on Sound Services.

Replacement low frequency main drivers as used in Citronic CASA, CUBA and CLARA series passive cabinets.

• Direct replacements for CASA or CUBA series full range passive cabinets
• Construction: Reinforced paper cone with steel frame basket
• Impedance: 8 Ohms
• Power handling : rms: 300W
• Power handling : max: 600W
• Frequency response: 50Hz – 3kHz
• Voice coil: 64mmØ (2.5″)
• Magnet: 1.42kg (50oz)
• Sensitivity: 96dB
• Dimensions: 160 x 310mmØ
• Weight: 4.80kg

See the ‘User Manuals’ tab on the left of this page – as manufacturers are making instruction sheets and user manuals available for download only and your purchase may not include a printed version.

The post Citronic LFCASA-12 Chassis Speaker appeared first on Sound Services.

Replacement low frequency main drivers as used in Citronic CASA, CUBA and CLARA series passive cabinets.

• Direct replacements for CASA or CUBA series full range passive cabinets
• Construction: Reinforced paper cone with steel frame basket
• Impedance: 8 Ohms
• Power handling : rms: 250W
• Power handling : max: 500W
• Frequency response: 55Hz – 3kHz
• Voice coil: 50mmØ (2″)
• Magnet: 1.13kg (40oz)
• Sensitivity: 95dB
• Dimensions: 130 x 257mmØ
• Weight: 2.60kg

See the ‘User Manuals’ tab on the left of this page – as manufacturers are making instruction sheets and user manuals available for download only and your purchase may not include a printed version.

The post Citronic LFCASA-10 Chassis Speaker appeared first on Sound Services.