High quality resistant coating and rear reflector. Suitable for light sequencers and sound-to-light units.

• High quality resistant coating and rear reflector
• Power supply: 230Vac
• ANSI: R80
• Fitting: E27
• Life (hours): 750
• Rating: 60W

Available Colours:

• Red: 160.002
• Blue: 160.003
• Green: 160.004
• Yellow: 160.006

The post QTX R80 Reflector Bulbs appeared first on Sound Services.

• M8 x 15 mm
• Load capacity: 75 kg max.
• Black lacquered
• Weight: 37 g

The installation should be carried out by experts only. Improper installation may put persons and units at risk.

The post Monacor FLS-190 Eyebolt appeared first on Sound Services.

The RP12 is a relay pack with 12 IEC power outputs. Each output is controlled by an individual relay which turns the power on and off saving energy and preserving the lifespan of your light effects. This is ideal for use with low voltage LED light effects which, when used with dimmer packs, turn on and off randomly with the pulse voltage sent through the system. These outputs can be turned on or off using the controls on the digital LED front panel display or by DMX which can be configured so that there are 12, 6, 3, 2 or 1 channel DMX allowing you to suit the need for your setup.

• 12 individual IEC outputs
• 12, 6, 3, 2 or 1 channel DMX
• Digital LED display on the front panel
• DMX or manually controlled
• 19″ rack mountable
• Power supply: 230Vac, 50Hz
• Maximum current input: 30A
• Maximum current per channel: 10A
• IEC outputs: 12
• Dimensions: 440 x 205 x 88mm
• Weight: 3.8kg

Please note: lighting and DMX products are listed for convenience alongside our sound equipment range. While we’re happy to process your order, our expertise is in audio — so if you need technical advice on DMX setup or configuration, we’d recommend seeking a lighting specialist.

See the ‘User Manuals’ tab on the left of this page – as manufacturers are making instruction sheets and user manuals available for download only and your purchase may not include a printed version.

The post QTX RP12 DMX Relay Pack appeared first on Sound Services.

The RP4 4 channel DMX relay pack has 4 DMX channels each with 2 IEC power outputs per channel. It completely turns the power on and off saving energy and preserving the lifespan of your light effects. This is ideal for use with low voltage LED light effects which, when used with dimmer packs, turn on and off randomly with the pulse voltage sent through the system.

• 4 DMX channel output
• Power on and off for each channel
• DIP switch DMX addressing
• Wall mountable
• Power supply: 230Vac, 50Hz (IEC)
• Dimensions: 193 x 72 x 260mm
• Weight: 2.3kg

Please note: lighting and DMX products are listed for convenience alongside our sound equipment range. While we’re happy to process your order, our expertise is in audio — so if you need technical advice on DMX setup or configuration, we’d recommend seeking a lighting specialist.

See the ‘User Manuals’ tab on the left of this page – as manufacturers are making instruction sheets and user manuals available for download only and your purchase may not include a printed version.

The post QTX RP4 Relay Pack appeared first on Sound Services.

The DP4 4 channel DMX dimmer pack has 4 channels each with 2 IEC power outputs per channel. It has 16 built-in chase programs or can be controlled by 4 channel DMX.

• LED readout display
• 16 built-in chase programs
• 4 channel output
• Pulse feature to keep lamp filaments warm for instant On/Off effect
• Master/slave modes
• Wall mountable
• Power supply: 230Vac, 50Hz (IEC)
• Working temperature: -5°C to +45°C (Ambient)
• Dimensions: 193 x 72 x 260mm
• Weight: 2.5kg

Please note that this product is not suitable for LED products. For LED products, we recommend the RP4.

Please note: lighting and DMX products are listed for convenience alongside our sound equipment range. While we’re happy to process your order, our expertise is in audio — so if you need technical advice on DMX setup or configuration, we’d recommend seeking a lighting specialist.

See the ‘User Manuals’ tab on the left of this page – as manufacturers are making instruction sheets and user manuals available for download only and your purchase may not include a printed version.

The post QTX DP4 Dimmer Pack appeared first on Sound Services.

Sturdy lighting stand with 3m wide triangle truss pre-drilled to facilitate mounting on all three sides. Easy to assemble with height adjustment.

• Supplied with safety pins for height adjustment
• Also includes mounting fixtures for up to 12 lighting effects
• Height: 1.5 – 3.0m
• Max. weight load: 120kg
• Tube: 38mmØ
• Width: truss 3.0m
• Dimensions: collapsed 1500 x 220 x 200mm
• Weight: 26kg

See the ‘User Manuals’ tab on the left of this page – as manufacturers are making instruction sheets and user manuals available for download only and your purchase may not include a printed version.

The post QTX LGP2 Triangle Lighting Truss System appeared first on Sound Services.

Strong metal screw clamp specially designed for safe fixing of lighting fixtures. Fits on poles from 37-50mmØ

Product styles may vary.

See the ‘User Manuals’ tab on the left of this page – as manufacturers are making instruction sheets and user manuals available for download only and your purchase may not include a printed version.

The post QTX Mounting Hooks for Light Effects appeared first on Sound Services.

Special screw clamp for lighting fixtures. “G” shaped for universal applications. Fits on poles up to 55mmØ

Product styles may vary.

See the ‘User Manuals’ tab on the left of this page – as manufacturers are making instruction sheets and user manuals available for download only and your purchase may not include a printed version.

The post QTX 151.452 Mounting Hooks for Light Effects appeared first on Sound Services.

• Robust steel tube version
• T-crossbar (100 cm) for accepting up to 4 lights
• Height adjustable in 6 steps (150-320 cm), with locking pin
• High stability due to magnesium joint sleeve
• Supplied with 4 fixing screw sets
• Max. load/central weight concentration: 30 kg
• Weight: 6.9 kg

PLEASE NOTE:

• That these tripods must be staked on tied when used outside
• We recommend that the cross bar is reduced in length to improve stability
• We recommend that the useful height is kept to around 2.5m to improve stability

• Minimum height 1.5m
• Maximum height 3.2m

This tripod is suitable for two larger horn speakers or up to four smaller horn speakers

See the ‘User Manuals’ tab on the left of this page – as manufacturers are making instruction sheets and user manuals available for download only and your purchase may not include a printed version.

The post IMG Stageline PAST-225/SW Tripod appeared first on Sound Services.