A 3.5mm jack socket provides an output for use with 32Ω headphones or earphones (not included). The RXti 2 will not function properly with 600 ohm hi-fi type headphones or any other headphones not rated 32Ω.

SigNET’s range of loop testing equipment have been designed to allow AFILS installers and service engineers to correctly set up and test induction loop systems.

Although the RXti2 was initially designed to be used with headphones as an induction loop receiver where hearing devices aren’t compatible, it has become a cost effective way of testing the system is live where the more technical FPROK1 isn’t accessible without an engineer. On-board filters reduce the amount of mains hum and other background noise to give the user a more pleasurable experience, whilst a rotary on/off and volume control with soft start gives the user full control over their audible level.

• Dimensions (w x h x d): 60 x 113 x 25mm
• Power requirement: 2x AAA batteries

See the ‘User Manuals’ tab on the left of this page – as manufacturers are making instruction sheets and user manuals available for download only and your purchase may not include a printed version.

The post SigNET RXti 2 Induction Loop Receiver appeared first on Sound Services.

We supply a complete set of equipment ready for you to install – the induction loop amplifier, 100m induction loop cable, black or white boundary microphone with mic cable, link cable so that you can connect the line level signal from your public address PA sound system or audio mixer to the loop, induction loop tester and installation guide etc.

Loop Amplifier:

• Rack-mount or free standing induction Loop amplifier
• Coverage: Up to 600m²

Boundary Microphone:

• White finish
• Wall or desk mounting
• Designed for induction loop systems
• Metal housing

Loop Receiver / Tester:

• Headphones and earphones supplied
• 3.5mm mono connection for headphones ≥ 32Ω
• Volume control
• Low cut filter
• Belt clip
• Battery powered
• Dimensions: 68 x 110 x 21mm
• Weight: 95g
• Product styles may vary

System Includes:

• 1 x 600m² loop amplifier
• 1 x Loop tester with earphones and headphones
• 1 x boundary microphone with microphone cable
• 1 x Audio input cable for amplifier
• 1 x reel of loop cable

Speaker cable assembly and installation of these systems require some DIY assembly skills – you should only require basic DIY tools together with speaker, amplifier and cable fixings etc.

Constant development means that illustrations are only representative and items supplied may be newer or improved models that are available at the time of your order.

See the ‘User Manuals’ tab on the left of this page – as manufacturers are making instruction sheets and user manuals available for download only and your purchase may not include a printed version.

Not quite right for you?
Ask us to quote a custom PA sound system

The post 600m² Induction Loop System for Meeting Halls and Public Venues appeared first on Sound Services.

We supply a complete set of equipment ready for you to install – the induction loop amplifier, 100m induction loop cable, black or white boundary microphone with mic cable, link cable so that you can connect the line level signal from your public address PA sound system or audio mixer to the loop, induction loop tester and installation guide etc.

Loop Amplifier:

• Rack-mount induction Loop amplifier
• Coverage: Up to 300m²

Boundary Microphone:

• White finish
• Wall or desk mounting
• Designed for induction loop systems
• Metal housing

Loop Receiver / Tester:

• Headphones and earphones supplied
• 3.5mm mono connection for headphones ≥ 32Ω
• Volume control
• Low cut filter
• Belt clip
• Battery powered
• Dimensions: 68 x 110 x 21mm
• Weight: 95g
• Product styles may vary

System Includes:

• 1 x 300m² loop amplifier
• 1 x Loop tester with earphones and headphones
• 1 x boundary microphone with microphone cable
• 1 x Audio input cable for amplifier
• 1 x reel of loop cable

Speaker cable assembly and installation of these systems require some DIY assembly skills – you should only require basic DIY tools together with speaker, amplifier and cable fixings etc.

Constant development means that illustrations are only representative and items supplied may be newer or improved models that are available at the time of your order.

See the ‘User Manuals’ tab on the left of this page – as manufacturers are making instruction sheets and user manuals available for download only and your purchase may not include a printed version.

Not quite right for you?
Ask us to quote a custom PA sound system

The post 300m² Induction Loop System for Meeting Halls and Public Venues appeared first on Sound Services.

We supply a complete set of equipment ready for you to install – the induction loop amplifier, 100m induction loop cable, black or white boundary microphone with mic cable, link cable so that you can connect the line level signal from your public address PA sound system or audio mixer to the loop, induction loop tester and installation guide etc.

Loop Amplifier:

• Rack-mount or free standing induction Loop amplifier
• Coverage: Up to 600m²

Boundary Microphone:

• Black finish
• Wall or desk mounting
• Designed for induction loop systems
• Metal housing

Loop Receiver / Tester:

• Headphones and earphones supplied
• 3.5mm mono connection for headphones ≥ 32Ω
• Volume control
• Low cut filter
• Belt clip
• Battery powered
• Dimensions: 68 x 110 x 21mm
• Weight: 95g
• Product styles may vary

System Includes:

• 1 x 600m² loop amplifier
• 1 x Loop tester with earphones and headphones
• 1 x boundary microphone with microphone cable
• 1 x Audio input cable for amplifier
• 1 x reel of loop cable

Speaker cable assembly and installation of these systems require some DIY assembly skills – you should only require basic DIY tools together with speaker, amplifier and cable fixings etc.

Constant development means that illustrations are only representative and items supplied may be newer or improved models that are available at the time of your order.

See the ‘User Manuals’ tab on the left of this page – as manufacturers are making instruction sheets and user manuals available for download only and your purchase may not include a printed version.

Not quite right for you?
Ask us to quote a custom PA sound system

The post 600m² Induction Loop System for Meeting Halls and Public Venues appeared first on Sound Services.

We supply a complete set of equipment ready for you to install – the induction loop amplifier, 100m induction loop cable, black or white boundary microphone with mic cable, link cable so that you can connect the line level signal from your public address PA sound system or audio mixer to the loop, induction loop tester and installation guide etc.

Loop Amplifier:

• Rack-mount induction Loop amplifier
• Coverage: Up to 300m²

Boundary Microphone:

• Black finish
• Wall or desk mounting
• Designed for induction loop systems
• Metal housing

Loop Receiver / Tester:

• Headphones and earphones supplied
• 3.5mm mono connection for headphones ≥ 32Ω
• Volume control
• Low cut filter
• Belt clip
• Battery powered
• Dimensions: 68 x 110 x 21mm
• Weight: 95g
• Product styles may vary

System Includes:

• 1 x 300m² loop amplifier
• 1 x Loop tester with earphones and headphones
• 1 x boundary microphone with microphone cable
• 1 x Audio input cable for amplifier
• 1 x reel of loop cable

Speaker cable assembly and installation of these systems require some DIY assembly skills – you should only require basic DIY tools together with speaker, amplifier and cable fixings etc.

Constant development means that illustrations are only representative and items supplied may be newer or improved models that are available at the time of your order.

See the ‘User Manuals’ tab on the left of this page – as manufacturers are making instruction sheets and user manuals available for download only and your purchase may not include a printed version.

Not quite right for you?
Ask us to quote a custom PA sound system

The post 300m² Induction Loop System for Meeting Halls and Public Venues appeared first on Sound Services.

We supply a complete set of equipment ready for you to install – the induction loop amplifier, 100m induction loop cable, black or white boundary microphone with mic cable, link cable so that you can connect the line level signal from your public address PA sound system or audio mixer to the loop, induction loop tester and installation guide etc.

The loop receiver and headphones are for setting the system up and for testing the system periodically – the receiver and headphones can also be used as a useful listening aid to those who are hard of hearing but do not wear hearing aids.

Loop Amplifier:

• free standing Induction Loop amplifier
• Coverage: Up to 1,000m²

Boundary Microphone:

• White finish
• Wall or desk mounting
• Designed for induction loop systems
• Metal housing

Loop Receiver / Tester:

• Headphones and earphones supplied
• 3.5mm mono connection for headphones ≥ 32Ω
• Volume control
• Low cut filter
• Belt clip
• Battery powered
• Dimensions: 68 x 110 x 21mm
• Weight: 95g
• Product styles may vary

System Includes:

• 1 x 1,000m² loop amplifier
• 1 x loop tester with earphones and headphones
• 1 x boundary microphone with microphone cable
• 1 x audio input cable for amplifier
• 1 x reel of loop cable

The loop amplifiers used in these systems are complex and require accuracy when setting-up prior to operation – please read the user manual.

Speaker cable assembly and installation of these systems require some DIY assembly skills – you should only require basic DIY tools together with speaker, amplifier and cable fixings etc.

Constant development means that illustrations are only representative and items supplied may be newer or improved models that are available at the time of your order.

See the ‘User Manuals’ tab on the left of this page – as manufacturers are making instruction sheets and user manuals available for download only and your purchase may not include a printed version.

Not quite right for you?
Ask us to quote a custom PA sound system

The post 1,000m² Induction Loop System for Meeting Halls and Public Venues appeared first on Sound Services.

We supply a complete set of equipment ready for you to install – the induction loop amplifier, 100m induction loop cable, black or white boundary microphone with mic cable, link cable so that you can connect the line level signal from your public address PA sound system or audio mixer to the loop, induction loop tester and installation guide etc.

Loop Amplifier:

• free standing Induction Loop amplifier
• Coverage: Up to 500m²

Boundary Microphone:

• White finish
• Wall or desk mounting
• Designed for induction loop systems
• Metal housing

Loop Receiver / Tester:

• Headphones and earphones supplied
• 3.5mm mono connection for headphones ≥ 32Ω
• Volume control
• Low cut filter
• Belt clip
• Battery powered
• Dimensions: 68 x 110 x 21mm
• Weight: 95g
• Product styles may vary

System Includes:

• 1 x 500m² loop amplifier
• 1 x Loop tester with earphones and headphones
• 1 x boundary microphone with microphone cable
• 1 x Audio input cable for amplifier
• 1 x reel of loop cable

The loop amplifiers used in these systems are complex and require accuracy when setting-up prior to operation – please read the user manual.

Speaker cable assembly and installation of these systems require some DIY assembly skills – you should only require basic DIY tools together with speaker, amplifier and cable fixings etc.

Constant development means that illustrations are only representative and items supplied may be newer or improved models that are available at the time of your order.

See the ‘User Manuals’ tab on the left of this page – as manufacturers are making instruction sheets and user manuals available for download only and your purchase may not include a printed version.

Not quite right for you?
Ask us to quote a custom PA sound system

The post 500m² Induction Loop System for Meeting Halls and Public Venues appeared first on Sound Services.

We supply a complete set of equipment ready for you to install – the induction loop amplifier, 100m induction loop cable, black or white boundary microphone with mic cable, link cable so that you can connect the line level signal from your public address PA sound system or audio mixer to the loop, induction loop tester and installation guide etc.

Loop Amplifier:

• free standing Induction Loop amplifier
• Coverage: Up to 200m²

Boundary Microphone:

• White finish
• Wall or desk mounting
• Designed for induction loop systems
• Metal housing

Loop Receiver / Tester:

• Headphones and earphones supplied
• 3.5mm mono connection for headphones ≥ 32Ω
• Volume control
• Low cut filter
• Belt clip
• Battery powered
• Dimensions: 68 x 110 x 21mm
• Weight: 95g
• Product styles may vary

System Includes:

• 1 x 200m² loop amplifier
• 1 x Loop tester with earphones and headphones
• 1 x boundary microphone with microphone cable
• 1 x Audio input cable for amplifier
• 1 x reel of loop cable

The loop amplifiers used in these systems are complex and require accuracy when setting-up prior to operation – please read the user manual.

Speaker cable assembly and installation of these systems require some DIY assembly skills – you should only require basic DIY tools together with speaker, amplifier and cable fixings etc.

Constant development means that illustrations are only representative and items supplied may be newer or improved models that are available at the time of your order.

See the ‘User Manuals’ tab on the left of this page – as manufacturers are making instruction sheets and user manuals available for download only and your purchase may not include a printed version.

Not quite right for you?
Ask us to quote a custom PA sound system

The post 200m² Induction Loop System for Meeting Halls and Public Venues appeared first on Sound Services.

We supply a complete set of equipment ready for you to install – the induction loop amplifier, 100m induction loop cable, black or white boundary microphone with mic cable, link cable so that you can connect the line level signal from your public address PA sound system or audio mixer to the loop, induction loop tester and installation guide etc.

Loop Amplifier:

• free standing Induction Loop amplifier
• Coverage: Up to 200m²

Boundary Microphone:

• Black finish
• Wall or desk mounting
• Designed for induction loop systems
• Metal housing

Loop Receiver / Tester:

• Headphones and earphones supplied
• 3.5mm mono connection for headphones ≥ 32Ω
• Volume control
• Low cut filter
• Belt clip
• Battery powered
• Dimensions: 68 x 110 x 21mm
• Weight: 95g
• Product styles may vary

System Includes:

• 1 x 200m² loop amplifier
• 1 x Loop tester with earphones and headphones
• 1 x boundary microphone with microphone cable
• 1 x Audio input cable for amplifier
• 1 x reel of loop cable

The loop amplifiers used in these systems are complex and require accuracy when setting-up prior to operation – please read the user manual.

Speaker cable assembly and installation of these systems require some DIY assembly skills – you should only require basic DIY tools together with speaker, amplifier and cable fixings etc.

Constant development means that illustrations are only representative and items supplied may be newer or improved models that are available at the time of your order.

See the ‘User Manuals’ tab on the left of this page – as manufacturers are making instruction sheets and user manuals available for download only and your purchase may not include a printed version.

Not quite right for you?
Ask us to quote a custom PA sound system

The post 200m² Induction Loop System for Meeting Halls and Public Venues appeared first on Sound Services.

For induction loop systems for the hard of hearing in Churches, public buildings, meeting halls, sports venues and schools etc.

• Free-standing 11A hearing loop amplifier ideal for use in areas up to 1000m2
• Intuitive LED interface allows simple set-up of input levels, output current, phantom power & metal compensation
• 2 x XLR mic/line inputs (selectable) & 1 outreach connector
• Class D output stage for maximum efficiency
• Superior audio processing and powerful CPU provide life-like speech and first class music reproduction
• Fault relay & LED indicators provide clear indication of operation and fault status
• Industry leading dual action automatic gain control compensates for poor microphone technique
• Line level output for recording or daisy-chaining multiple units to cover larger areas
• Complies with EN62368-1 (Safety requirements for audio/video, information and communication technology equipment)
• Type: Free-standing. Plugtop IEC mains lead supplied
• Coverage: 1000m2 approximately
• Mains supply: Plugtop IEC mains lead supplied
• Output: 11A loop drive current @ 1 Ohm; Loop output volage 14V
• Max battery size and type: n/a
• Auxiliary inputs: 2 x XLR mic/line inputs with switchable 12V phantom power (on or off) & Outreach
• Indicators: LED display with level, peak and limit indicators, Mic, 12V, Line, Metal, Outreach, Lock, Loop, Fault, Hot and Power Indicators
• Controls: Line Input, Microphone, 12V Phantom, Outreach, Metal Comp, Loop Drive
• Connections: Mic (3-pin XLR); Line In (3-pin XLR); Loop (2 way binding post); Outreach (4-way pluggable connector); Line Out (3-way pluggable connector); Fault Relay (3-way pluggable connector)
• Product dimensions (mm): 67 (H) x 218 (W) x 280 (D) mm
• Construction & finish: Mild steel zintec, 1mm thick, black powder coated
• IP Rating: IP40
• Weight: 2.38kg
• Operating conditions/temperature: -5ºC to +40ºC. Max relative humidity: 95%

These loop amplifiers are complex and require accuracy when setting-up prior to operation – please read the user manual

See the ‘User Manuals’ tab on the left of this page – as manufacturers are making instruction sheets and user manuals available for download only and your purchase may not include a printed version.

The post SigNET PDA11/SD Induction Loop Amplifier appeared first on Sound Services.