A 3.5mm jack socket provides an output for use with 32Ω headphones or earphones (not included). The RXti 2 will not function properly with 600 ohm hi-fi type headphones or any other headphones not rated 32Ω.

SigNET’s range of loop testing equipment have been designed to allow AFILS installers and service engineers to correctly set up and test induction loop systems.

Although the RXti2 was initially designed to be used with headphones as an induction loop receiver where hearing devices aren’t compatible, it has become a cost effective way of testing the system is live where the more technical FPROK1 isn’t accessible without an engineer. On-board filters reduce the amount of mains hum and other background noise to give the user a more pleasurable experience, whilst a rotary on/off and volume control with soft start gives the user full control over their audible level.

• Dimensions (w x h x d): 60 x 113 x 25mm
• Power requirement: 2x AAA batteries

See the ‘User Manuals’ tab on the left of this page – as manufacturers are making instruction sheets and user manuals available for download only and your purchase may not include a printed version.

The post SigNET RXti 2 Induction Loop Receiver appeared first on Sound Services.

Low profile ceiling or panel mounting boundary microphone with an omnidirectional pick-up pattern which is suitable for use where discreet audio surveillance is required. Applications range from audio pick-up in induction loop systems to audio monitoring and recording for CCTV systems.

• Built-in electret microphones
• Particularly suitable for PA applications
• Metal housing
• Black (SW) or white (WS) cartridge cover
• Description: built-in microphone
• Transmission method: cable
• Polar pattern: omnidirectional
• System: electret
• Audio frequency range: 30-17,000 Hz
• Nominal impedance: 300 Ω
• Sensitivity: 2.3 mV/Pa
• Max. sound pressure: 110 dB
• Power supply: DC 9-48 V, phantom power
• Housing material: metal
• Admissible ambient temperature: 0-40 °C
• Dimensions: Ø 30 mm x 71 mm
• Weight: 95 g
• Connection: XLR, balanced

See the ‘User Manuals’ tab on the left of this page – as manufacturers are making instruction sheets and user manuals available for download only and your purchase may not include a printed version.

The post Monacor ECM-10/SW Ceiling Boundary Microphone appeared first on Sound Services.

Low profile ceiling or panel mounting boundary microphone with an omnidirectional pick-up pattern which is suitable for use where discreet audio surveillance is required. Applications range from audio pick-up in induction loop systems to audio monitoring and recording for CCTV systems.

• Built-in electret microphones
• Particularly suitable for PA applications
• Metal housing
• Black (SW) or white (WS) cartridge cover
• Description: built-in microphone
• Transmission method: cable
• Polar pattern: omnidirectional
• System: electret
• Audio frequency range: 30-17,000 Hz
• Nominal impedance: 300 Ω
• Sensitivity: 2.3 mV/Pa
• Max. sound pressure: 110 dB
• Power supply: DC 9-48 V, phantom power
• Housing material: metal
• Admissible ambient temperature: 0-40 °C
• Dimensions: Ø 30 mm x 71 mm
• Weight: 95 g
• Connection: XLR, balanced

See the ‘User Manuals’ tab on the left of this page – as manufacturers are making instruction sheets and user manuals available for download only and your purchase may not include a printed version.

The post Monacor ECM-10/WS Ceiling Boundary Microphone appeared first on Sound Services.

A compact, battery powered belt-clip receiver for testing and setting up induction loop systems.

• Supplied with earphones and padded stereo headphones
• 3.5mm jack socket for headphone connection
• Volume control and lo-cut switch to adjust sound quality
• Can be used along with with an induction loop system to create an unobtrusive audio tour guide for art galleries, museums etc.
• Supplied with cabled in-ear headphones and cabled over-ear headphones
• Supplied with in-ear headphones
• Power supply: 9Vdc (PP3 battery – not included)
• Controls: Volume, lo-cut switch
• Connection: 3.5mm headphone jack
• Headphone impedance: 32 Ohms nominal
• Dimensions: 60 x 117 x 32mm
• Weight: 80g (no battery)

Please note that due to the nature and cost of these products we recommend that they be regarded as limited life consumable items that are for individual and personal use only

See the ‘User Manuals’ tab on the left of this page – as manufacturers are making instruction sheets and user manuals available for download only and your purchase may not include a printed version

The post Adastra LR2 Loop Receiver with Stereo Headphones appeared first on Sound Services.

Stylish headphones with in-line volume control. Featuring padded, flexible ear cups and an adjustable headband for a perfect, comfortable fit.

• In-line volume control
• Both headband and earcups are padded and easy to wipe clean
• Supplied with gold plated 3.5mm to 6.3mm stereo jack adaptor
• Speaker size: 40mmØ
• Frequency response: 20Hz-20kHz
• Impedance: 32 Ohms
• Power: 100mW
• Sensitivity: 95±3dB @ 1kHz
• Cable: 2.7m (±10%)
• Connector: 3.5mm stereo jack
• Product styles and colours may vary

See the ‘User Manuals’ tab on the left of this page – as manufacturers are making instruction sheets and user manuals available for download only and your purchase may not include a printed version

The post av:link SH40VC Stereo Headphones appeared first on Sound Services.

Low profile ceiling or panel mounting boundary microphone with an omnidirectional pick-up pattern which is suitable for use where discreet audio surveillance is required. Applications range from audio pick-up in induction loop systems to audio monitoring and recording for CCTV systems.

• Phantom powered (9-52Vdc)
• Threaded for up to 50mm through-hole mounting
• Omnidirectional pickup pattern
• Power supply: 9-52Vdc phantom power
• Cutout: 20mmØ
• Connection: XLR male
• Frequency response: 50Hz-17kHz
• Max. input SPL: 140dB @ 1kHz (?1% THD)
• Sensitivity: -39dB ±3dB (0dB=1V/Pa at 1kHz)
• Impedance: 200 Ohms ±30% (at 1 kHz)
• Dimensions: 72 x 32mmØ
• Weight: 76g

See the ‘User Manuals’ tab on the left of this page – as manufacturers are making instruction sheets and user manuals available for download only and your purchase may not include a printed version.

The post Adastra CBM20 Ceiling Boundary Microphone appeared first on Sound Services.

A 3.5mm jack socket provides an output for use with 32Ω headphones or earphones (not included). The RXti 2 will not function properly with 600 ohm hi-fi type headphones or any other headphones not rated 32Ω.

SigNET’s range of loop testing equipment have been designed to allow AFILS installers and service engineers to correctly set up and test induction loop systems.

Although the RXti2 was initially designed to be used with headphones as an induction loop receiver where hearing devices aren’t compatible, it has become a cost effective way of testing the system is live where the more technical FPROK1 isn’t accessible without an engineer. On-board filters reduce the amount of mains hum and other background noise to give the user a more pleasurable experience, whilst a rotary on/off and volume control with soft start gives the user full control over their audible level.

• Dimensions (w x h x d): 60 x 113 x 25mm
• Power requirement: 2x AAA batteries

Supplied with stereo headphones featuring padded, flexible ear cups and an adjustable headband for a comfortable fit.

• Ideal for use with Induction Loop testers and receivers
• Both headband and earcups are padded and easy to wipe clean
• Supplied with 3.5mm to 6.3mm stereo jack adaptor
• Impedance: 32 Ohms

See the ‘User Manuals’ tab on the left of this page – as manufacturers are making instruction sheets and user manuals available for download only and your purchase may not include a printed version.

The post SigNET RXti 2 Induction Loop Receiver and headphones appeared first on Sound Services.

Pro-Power TR 2.50MM 100m reel of 2.5mm white induction loop cable – available in Black or White

Flexible switchgear and control wire, manufactured in accordance with BS6231, BS EN50528-2-31, UL1015, UL758 and CSA C22.2.

• Jacket Material: PVC
• Jacket Colour: White or Black – see options
• Wire Gauge: 14AWG
• Conductor Area CSA: 2.5mm²
• Reel Length (Imperial): 328ft
• Reel Length (Metric): 100m
• Operating Temperature Max: 105°C
• No. of Max Strands x Strand Size: 50 x 0.25mm
• Voltage Rating: 1kV
• Conductor Material: Copper
• External Diameter: 3.6mm
• Product Range: Pro Power – Tri-Rated Switchgear Wire
• Weight: 3.08kg

See the ‘User Manuals’ tab on the left of this page – as manufacturers are making instruction sheets and user manuals available for download only and your purchase may not include a printed version.

The post Pro-Power TR 2.50MM Induction Loop Cable appeared first on Sound Services.

Yoga BM-38 boundary condenser microphone for surface fixing on any wall or other boundary surface. These microphones require a 9 to 48v phantom power supply supplied by your mixer or amplifier or by a stand alone power supply such as the EMA-200.

• Integrated electronics for use with phantom power 9-48V DC current
• Transformer-balanced AF output
• With 4m connection cable 3-pole mini XLR/XLR
• Colour: Black
• Type: boundary microphone
• Transmission method: cable
• Polar pattern: semi-cardioid
• System: electret
• Audio frequency range: 30-20,000 Hz
• Nominal impedance: 250 Ω
• Sensitivity: 22 mV/Pa
• Maximum sound pressure: 140 dB
• Power supply: DC current  17-48 V, phantom power
• Admissible ambient temperature: 0-40 °C
• Dimensions: Ø 120 mm x 22 mm
• Weight: 350 g
• Cable: 4 m
• Connection: 3-pole mini XLR/XLR

See the ‘User Manuals’ tab on the left of this page – as manufacturers are making instruction sheets and user manuals available for download only and your purchase may not include a printed version.

The post Yoga BM-38 Boundary Microphone appeared first on Sound Services.

A compact, battery powered belt-clip receiver for testing and setting up induction loop systems.

• Supplied with earphones
• 3.5mm jack socket for headphone connection
• Volume control and lo-cut switch to adjust sound quality
• Can be used along with with an induction loop system to create an unobtrusive audio tour guide for art galleries, museums etc.
• Supplied with cabled in-ear headphones and cabled over-ear headphones
• Supplied with in-ear headphones
• Power supply: 9Vdc (PP3 battery – not included)
• Controls: Volume, lo-cut switch
• Connection: 3.5mm headphone jack
• Headphone impedance: 32 Ohms nominal
• Dimensions: 60 x 117 x 32mm
• Weight: 80g (no battery)

Please note that due to the nature and cost of these products we recommend that they be regarded as limited life consumable items that are for individual and personal use only

See the ‘User Manuals’ tab on the left of this page – as manufacturers are making instruction sheets and user manuals available for download only and your purchase may not include a printed version.

The post Adastra LR2 Loop Receiver with Earphones appeared first on Sound Services.