Whether you run a Club, Bar, Restaurant, Retail Store, Church, or other Place of Worship, our annual service agreements are designed to offer excellent value and total peace of mind.

Your Annual Service Package Includes:

• A dedicated engineer – personal support from a named Sound Services technician who knows your system inside and out
• Full system inspection – including electrical PAT testing, inventory checks, and a written report with certification at the start of your contract
• Reliable performance – we keep your PA system running as expected, helping you avoid last-minute failures or poor audio quality
• Ongoing advice and support – phone and email assistance during working hours, with no hidden fees
• Priority attention when needed – fast response, including out-of-hours support (evenings/weekends) depending on your contract
• Loan equipment – temporary gear supplied at no extra cost if your equipment needs repair or replacement
• Preferential rates – discounted prices on replacement parts and labour when needed
• Regular on-site checks – scheduled visits to ensure safety, stability, and ease of use, including PAT testing and written certification
• Our service contracts offer exceptional value by combining technical expertise, responsive support, and cost-saving benefits — all from a trusted local provider.

If you’re located within 25 miles of Fleet, Hampshire, get in touch today on 01252 751272 or email us to discuss your custom service contract proposal. Let Sound Services keep your audio systems running smoothly, so you can focus on what matters most.

The post Peace of Mind Service Contract for your PA Sound System from Sound Services appeared first on Sound Services.

We supply a complete set of equipment ready for you to install – the induction loop amplifier, 100m induction loop cable, black or white boundary microphone with mic cable, link cable so that you can connect the line level signal from your public address PA sound system or audio mixer to the loop, induction loop tester and installation guide etc.

Loop Amplifier:

• Rack-mount or free standing induction Loop amplifier
• Coverage: Up to 600m²

Boundary Microphone:

• White finish
• Wall or desk mounting
• Designed for induction loop systems
• Metal housing

Loop Receiver / Tester:

• Headphones and earphones supplied
• 3.5mm mono connection for headphones ≥ 32Ω
• Volume control
• Low cut filter
• Belt clip
• Battery powered
• Dimensions: 68 x 110 x 21mm
• Weight: 95g
• Product styles may vary

System Includes:

• 1 x 600m² loop amplifier
• 1 x Loop tester with earphones and headphones
• 1 x boundary microphone with microphone cable
• 1 x Audio input cable for amplifier
• 1 x reel of loop cable

Speaker cable assembly and installation of these systems require some DIY assembly skills – you should only require basic DIY tools together with speaker, amplifier and cable fixings etc.

Constant development means that illustrations are only representative and items supplied may be newer or improved models that are available at the time of your order.

See the ‘User Manuals’ tab on the left of this page – as manufacturers are making instruction sheets and user manuals available for download only and your purchase may not include a printed version.

Not quite right for you?
Ask us to quote a custom PA sound system

The post 600m² Induction Loop System for Meeting Halls and Public Venues appeared first on Sound Services.

We supply a complete set of equipment ready for you to install – the induction loop amplifier, 100m induction loop cable, black or white boundary microphone with mic cable, link cable so that you can connect the line level signal from your public address PA sound system or audio mixer to the loop, induction loop tester and installation guide etc.

Loop Amplifier:

• Rack-mount induction Loop amplifier
• Coverage: Up to 300m²

Boundary Microphone:

• White finish
• Wall or desk mounting
• Designed for induction loop systems
• Metal housing

Loop Receiver / Tester:

• Headphones and earphones supplied
• 3.5mm mono connection for headphones ≥ 32Ω
• Volume control
• Low cut filter
• Belt clip
• Battery powered
• Dimensions: 68 x 110 x 21mm
• Weight: 95g
• Product styles may vary

System Includes:

• 1 x 300m² loop amplifier
• 1 x Loop tester with earphones and headphones
• 1 x boundary microphone with microphone cable
• 1 x Audio input cable for amplifier
• 1 x reel of loop cable

Speaker cable assembly and installation of these systems require some DIY assembly skills – you should only require basic DIY tools together with speaker, amplifier and cable fixings etc.

Constant development means that illustrations are only representative and items supplied may be newer or improved models that are available at the time of your order.

See the ‘User Manuals’ tab on the left of this page – as manufacturers are making instruction sheets and user manuals available for download only and your purchase may not include a printed version.

Not quite right for you?
Ask us to quote a custom PA sound system

The post 300m² Induction Loop System for Meeting Halls and Public Venues appeared first on Sound Services.

We supply a complete set of equipment ready for you to install – the induction loop amplifier, 100m induction loop cable, black or white boundary microphone with mic cable, link cable so that you can connect the line level signal from your public address PA sound system or audio mixer to the loop, induction loop tester and installation guide etc.

Loop Amplifier:

• Rack-mount or free standing induction Loop amplifier
• Coverage: Up to 600m²

Boundary Microphone:

• Black finish
• Wall or desk mounting
• Designed for induction loop systems
• Metal housing

Loop Receiver / Tester:

• Headphones and earphones supplied
• 3.5mm mono connection for headphones ≥ 32Ω
• Volume control
• Low cut filter
• Belt clip
• Battery powered
• Dimensions: 68 x 110 x 21mm
• Weight: 95g
• Product styles may vary

System Includes:

• 1 x 600m² loop amplifier
• 1 x Loop tester with earphones and headphones
• 1 x boundary microphone with microphone cable
• 1 x Audio input cable for amplifier
• 1 x reel of loop cable

Speaker cable assembly and installation of these systems require some DIY assembly skills – you should only require basic DIY tools together with speaker, amplifier and cable fixings etc.

Constant development means that illustrations are only representative and items supplied may be newer or improved models that are available at the time of your order.

See the ‘User Manuals’ tab on the left of this page – as manufacturers are making instruction sheets and user manuals available for download only and your purchase may not include a printed version.

Not quite right for you?
Ask us to quote a custom PA sound system

The post 600m² Induction Loop System for Meeting Halls and Public Venues appeared first on Sound Services.

We supply a complete set of equipment ready for you to install – the induction loop amplifier, 100m induction loop cable, black or white boundary microphone with mic cable, link cable so that you can connect the line level signal from your public address PA sound system or audio mixer to the loop, induction loop tester and installation guide etc.

Loop Amplifier:

• Rack-mount induction Loop amplifier
• Coverage: Up to 300m²

Boundary Microphone:

• Black finish
• Wall or desk mounting
• Designed for induction loop systems
• Metal housing

Loop Receiver / Tester:

• Headphones and earphones supplied
• 3.5mm mono connection for headphones ≥ 32Ω
• Volume control
• Low cut filter
• Belt clip
• Battery powered
• Dimensions: 68 x 110 x 21mm
• Weight: 95g
• Product styles may vary

System Includes:

• 1 x 300m² loop amplifier
• 1 x Loop tester with earphones and headphones
• 1 x boundary microphone with microphone cable
• 1 x Audio input cable for amplifier
• 1 x reel of loop cable

Speaker cable assembly and installation of these systems require some DIY assembly skills – you should only require basic DIY tools together with speaker, amplifier and cable fixings etc.

Constant development means that illustrations are only representative and items supplied may be newer or improved models that are available at the time of your order.

See the ‘User Manuals’ tab on the left of this page – as manufacturers are making instruction sheets and user manuals available for download only and your purchase may not include a printed version.

Not quite right for you?
Ask us to quote a custom PA sound system

The post 300m² Induction Loop System for Meeting Halls and Public Venues appeared first on Sound Services.

CHU-240 240w Church sound system with 1000m² induction loop system and 2 to 8 black or white cabinet speakers

Each sound system is supplied with 240w mixer amplifier, 1000m² induction loop amplifier, loop receiver with headphones, 2 to 8 x black or white wall mount loudspeakers, 2 x clothing clip wireless microphone, loudspeaker and induction loop cable and interconnect leads, instructions etc.

Please note that the speakers are packed and sold in pairs

This package must be wired as a 100v line sound system – please see user manuals tab

Mixer Amplifier:

• 240w RMS
• Microphone & Aux inputs
• Speaker outputs via screw terminals
• Line output
• Input and output level controls
• Bass and treble controls
• Phantom power
• Mains operation or 24v DC emergency power operation
• Free standing or rack installation
• Use terminal block to extend speaker cable
• Do not short speaker cables together

Wireless Microphones:

• Two wireless microphones supplied – pocket transmitters & clothing clip mics
• True diversity UHF systems
• License free in the UK & EU
• Volume and squelch controls
• Optional handheld wireless mic system available

Speakers:

Loop Amplifier:

• Coverage: 1000m²
• Dimensions: W 380 x H 80 (2U) x D 220mm
• Weight: 3.74kg
• Inputs: 2 x XLR (one mic & one mic/line)
• Indicators: Loop drive meter; compression (high/low); power on
• Controls: 3 x input level controls, loop drive, metal compensation, on/off switch

System Includes:

• 1 x 240w mixer amplifier with Bluetooth and media player
• Up to 8 x black or white wall mounted speakers (please note that speakers are packed and supplied in pairs) – see options
• 2 x Input connector leads for MP3 players etc.
• 1 x 1000m² induction loop amplifier
• 1 x Induction loop receiver and earphones and headphones
• 1 x Twin bodyworn wireless microphones with clothing clip microphones (tie-clip mic)
• 2 x Wireless receiver to amplifier cables
• Speaker cable
• Induction loop cable

Sound Services deliver this complete sound system without extra charge to most mainland UK addresses

The loop amplifiers used in these systems are complex and require accuracy when setting-up prior to operation – please read the user manual

Speaker cable assembly and installation of these systems require some DIY assembly skills – you should only require basic DIY tools together with speaker, amplifier and cable fixings etc.

Constant development means that illustrations are only representative and items supplied may be newer or improved models that are available at the time of your order

See the ‘User Manuals’ tab on the left of this page – as manufacturers are making instruction sheets and user manuals available for download only and your purchase may not include a printed version

Not quite right for you?
Ask us to quote a custom PA sound system

The post 240w Sound System with 1000m² Induction Loop System for Places of Worship appeared first on Sound Services.

CHU-240 240w Church sound system with 500m² induction loop system and 2 to 8 black or white cabinet speakers

Each sound system is supplied with 240w mixer amplifier, 500m² induction loop amplifier, loop receiver with headphones, 2 to 8 x black or white wall mount loudspeakers, 2 x clothing clip wireless microphone, loudspeaker and induction loop cable and interconnect leads, instructions etc.

Please note that the speakers are packed and sold in pairs

This package must be wired as a 100v line sound system – please see user manuals tab

Mixer Amplifier:

• 240w RMS
• Microphone & Aux inputs
• Speaker outputs via screw terminals
• Line output
• Input and output level controls
• Bass and treble controls
• Phantom power
• Mains operation or 24v DC emergency power operation
• Free standing or rack installation
• Use terminal block to extend speaker cable
• Do not short speaker cables together

Wireless Microphones:

• Two wireless microphones supplied – pocket transmitters & clothing clip mics
• True diversity UHF systems
• License free in the UK & EU
• Volume and squelch controls
• Optional handheld wireless mic system available

Speakers:

Loop Amplifier:

• Coverage: 500m²
• Dimensions: W 380 x H 80 (2U) x D 220mm
• Weight: 3.74kg
• Inputs: 2 x XLR (one mic & one mic/line)
• Indicators: Loop drive meter; compression (high/low); power on
• Controls: 3 x input level controls, loop drive, metal compensation, on/off switch

System Includes:

• 1 x 240w mixer amplifier with Bluetooth and media player
• Up to 8 x black or white wall mounted speakers (please note that speakers are packed and supplied in pairs) – see options
• 2 x Input connector leads for MP3 players etc.
• 1 x 500m² induction loop amplifier
• 1 x Induction loop receiver and earphones and headphones
• 1 x Twin bodyworn wireless microphones with clothing clip microphones (tie-clip mic)
• 2 x Wireless receiver to amplifier cables
• Speaker cable
• Induction loop cable

Sound Services deliver this complete sound system without extra charge to most mainland UK addresses

The loop amplifiers used in these systems are complex and require accuracy when setting-up prior to operation – please read the user manual

Speaker cable assembly and installation of these systems require some DIY assembly skills – you should only require basic DIY tools together with speaker, amplifier and cable fixings etc.

Constant development means that illustrations are only representative and items supplied may be newer or improved models that are available at the time of your order

See the ‘User Manuals’ tab on the left of this page – as manufacturers are making instruction sheets and user manuals available for download only and your purchase may not include a printed version

Not quite right for you?
Ask us to quote a custom PA sound system

The post 240w Sound System with 500m² Induction Loop System for Places of Worship appeared first on Sound Services.

CHU-240 240w Church sound system with 600m² induction loop system and 2 to 8 black or white cabinet speakers

Each sound system is supplied with 240w mixer amplifier, 600m² induction loop amplifier, loop receiver with headphones, 2 to 8 x black or white wall mount loudspeakers, 2 x clothing clip wireless microphone, loudspeaker and induction loop cable and interconnect leads, instructions etc.

Please note that the speakers are packed and sold in pairs

This package must be wired as a 100v line sound system – please see user manuals tab

Mixer Amplifier:

• 240w RMS
• Microphone & Aux inputs
• Speaker outputs via screw terminals
• Line output
• Input and output level controls
• Bass and treble controls
• Phantom power
• Mains operation or 24v DC emergency power operation
• Free standing or rack installation
• Use terminal block to extend speaker cable
• Do not short speaker cables together

Wireless Microphones:

• Two wireless microphones supplied – pocket transmitters & clothing clip mics
• True diversity UHF systems
• License free in the UK & EU
• Volume and squelch controls
• Optional handheld wireless mic system available

Speakers:

Loop Amplifier:

• Coverage: 600m²
• Suitable for hearing aids fitted with a “T” switch
• Mic/line level switch for each input
• Phantom power switch for each input
• Tamper proof channel volume, bass & treble and loop current level controls
• Adjustable metal loss correction
• Alarm contacts for built-in siren
• Priority switchable for channel 1
• Peak current LED indication
• 19″ rack mountable
• Power supply: 110/240Vac, 50/60Hz (IEC)
• Frequency response: 50Hz – 5kHz (±3dB)
• Input sensitivity : line: -6dBu/6k Ohms
• Input sensitivity : mic: -56dBu/2k Ohms
• Signal to noise ratio: 75dB (line), 60dB (mic)
• THD: <1%
• Fuse: T2A 250V
• Rack height: 2U
• Area coverage: 600m² max.
• Dimensions: 483 x 235 x 88mm
• Weight: 4.22kg

System Includes:

• 1 x 240w mixer amplifier with Bluetooth and media player
• Up to 8 x black or white wall mounted speakers (please note that speakers are packed and supplied in pairs) – see options
• 2 x Input connector leads for MP3 players etc.
• 1 x 600m² induction loop amplifier
• 1 x matching pre-amp to maintain signal level between main amplifier and loop amplifier
• 1 x Induction loop receiver and earphones and headphones
• 1 x Twin bodyworn wireless microphones with clothing clip microphones (clothing-clip mic)
• 2 x Wireless receiver to amplifier cables
• Speaker cable
• Induction loop cable

Sound Services deliver this complete sound system without extra charge to most mainland UK addresses

Speaker cable assembly and installation of these systems require some DIY assembly skills – you should only require basic DIY tools together with speaker, amplifier and cable fixings etc.

Constant development means that illustrations are only representative and items supplied may be newer or improved models that are available at the time of your order

See the ‘User Manuals’ tab on the left of this page – as manufacturers are making instruction sheets and user manuals available for download only and your purchase may not include a printed version

Not quite right for you?
Ask us to quote a custom PA sound system

The post 240w Sound System with 600m² Induction Loop System for Places of Worship appeared first on Sound Services.

CHU-240 240w Church sound system with 300m² induction loop system and 2 to 8 black or white cabinet speakers

Each sound system is supplied with 240w mixer amplifier, 300m² induction loop amplifier, loop receiver with headphones, 2 to 8 x black or white wall mount loudspeakers, 2 x clothing clip wireless microphone, loudspeaker and induction loop cable and interconnect leads, instructions etc.

Please note that the speakers are packed and sold in pairs

This package must be wired as a 100v line sound system – please see user manuals tab

Mixer Amplifier:

• 240w RMS
• Microphone & Aux inputs
• Speaker outputs via screw terminals
• Line output
• Input and output level controls
• Bass and treble controls
• Phantom power
• Mains operation or 24v DC emergency power operation
• Free standing or rack installation
• Use terminal block to extend speaker cable
• Do not short speaker cables together

Wireless Microphones:

• Two wireless microphones supplied – pocket transmitters & clothing clip mics
• True diversity UHF systems
• License free in the UK & EU
• Volume and squelch controls
• Optional handheld wireless mic system available

Speakers:

Loop Amplifier:

• Coverage: 300m²
• Suitable for hearing aids fitted with a “T” switch
• Mic/line level switch for each input
• Phantom power switch for each input
• Tamper proof channel volume, bass & treble and loop current level controls
• Adjustable metal loss correction
• Alarm contacts for built-in siren
• Priority switchable for channel 1
• Peak current LED indication
• 19″ rack mountable
• Power supply: 110/240Vac, 50/60Hz (IEC)
• Frequency response: 50Hz – 5kHz (±3dB)
• Input sensitivity : line: -6dBu/6k Ohms
• Input sensitivity : mic: -56dBu/2k Ohms
• Signal to noise ratio: 75dB (line), 60dB (mic)
• THD: <1%
• Fuse: T1A 250V
• Rack height: 1U
• Area coverage: 300m² max.
• Dimensions: 483 x 235 x 44mm
• Weight: 3.80kg

System Includes:

• 1 x 240w mixer amplifier with Bluetooth and media player
• Up to 8 x black or white wall mounted speakers (please note that speakers are packed and supplied in pairs) – see options
• 2 x Input connector leads for MP3 players etc.
• 1 x 300m² induction loop amplifier
• 1 x matching pre-amp to maintain signal level between main amplifier and loop amplifier
• 1 x Induction loop receiver and earphones and headphones
• 1 x Twin bodyworn wireless microphones with clothing clip microphones (clothing-clip mic)
• 2 x Wireless receiver to amplifier cables
• Speaker cable
• Induction loop cable

Sound Services deliver this complete sound system without extra charge to most mainland UK addresses

Speaker cable assembly and installation of these systems require some DIY assembly skills – you should only require basic DIY tools together with speaker, amplifier and cable fixings etc.

Constant development means that illustrations are only representative and items supplied may be newer or improved models that are available at the time of your order

See the ‘User Manuals’ tab on the left of this page – as manufacturers are making instruction sheets and user manuals available for download only and your purchase may not include a printed version

Not quite right for you?
Ask us to quote a custom PA sound system

The post 240w Sound System with 300m² Induction Loop System for Places of Worship appeared first on Sound Services.

We supply a complete set of equipment ready for you to install – the induction loop amplifier, 100m induction loop cable, black or white boundary microphone with mic cable, link cable so that you can connect the line level signal from your public address PA sound system or audio mixer to the loop, induction loop tester and installation guide etc.

The loop receiver and headphones are for setting the system up and for testing the system periodically – the receiver and headphones can also be used as a useful listening aid to those who are hard of hearing but do not wear hearing aids.

Loop Amplifier:

• free standing Induction Loop amplifier
• Coverage: Up to 1,000m²

Boundary Microphone:

• White finish
• Wall or desk mounting
• Designed for induction loop systems
• Metal housing

Loop Receiver / Tester:

• Headphones and earphones supplied
• 3.5mm mono connection for headphones ≥ 32Ω
• Volume control
• Low cut filter
• Belt clip
• Battery powered
• Dimensions: 68 x 110 x 21mm
• Weight: 95g
• Product styles may vary

System Includes:

• 1 x 1,000m² loop amplifier
• 1 x Loop tester with earphones and headphones
• 1 x boundary microphone with microphone cable
• 1 x Audio input cable for amplifier
• 1 x reel of loop cable

The loop amplifiers used in these systems are complex and require accuracy when setting-up prior to operation – please read the user manual.

Speaker cable assembly and installation of these systems require some DIY assembly skills – you should only require basic DIY tools together with speaker, amplifier and cable fixings etc.

Constant development means that illustrations are only representative and items supplied may be newer or improved models that are available at the time of your order.

See the ‘User Manuals’ tab on the left of this page – as manufacturers are making instruction sheets and user manuals available for download only and your purchase may not include a printed version.

Not quite right for you?
Ask us to quote a custom PA sound system

The post 1000m² Induction Loop System for Meeting Halls and Public Venues appeared first on Sound Services.