Compact, lightweight, practical and yet amazingly powerful. The active speaker system FLAT-M100 is suitable for monitoring, side fill, front fill and rear fill applications due to its clear and powerful reproduction. It is also suitable wherever a powerful sound is required, despite limited space being available.

• Flat and very compact full range system
• Fitted with 4 x 10 cm (FaitalPRO, 4 x 4″) full range speaker with neodymium magnets
• Class D amplifier system
• Sound pressure at nominal power: 122 dB
• Indication of signal and limiter
• Volume control and tone control
• Balanced line/mic input and feed-through output
• High-quality multiplex wooden cabinet with protective metal grille
• 2 x M10 and 2 x M6 threaded inserts for stand adapter or mounting device
• Supplied with clamp for mounting, e.g. onto a microphone stand
• Active/passive: active
• Transmission method: cable
• Total output power: 300 W
• Power rating (RMS): 200 W
• Frequency range: 70-20,000 Hz
• Input signal: 25 mV/28 kΩ (line, balanced), 6 mV/20 kΩ (mic, balanced)
• System: 4 x 4″, full range
• Full range speaker: 4 x 10 cm (FaitalPRO 4 x 4″) full range speaker
• Number of speakers: 4
• Speaker size: 10 cm (4″)
• Sensitivity: 98 dB/W/m
• Max. rated SPL: 122 dB
• Housing material: multiplex
• Colour: black
• Mounting device: 2 x M10 threaded insert, 2 x M6 threaded insert
• Admissible ambient temperature: 0-40 °C
• Power supply: ˜ 230 V/50 Hz/356 VA
• Dimensions: 320 x 150 x 250 mm
• Weight: 4.11 kg
• Inputs: 1 x combination XLR/6.3 mm (line/mic)
• Outputs: 1 x XLR link out
• Other features: limiter
• Accessories: FLAT-M200BAG

See the ‘User Manuals’ tab on the left of this page – as manufacturers are making instruction sheets and user manuals available for download only and your purchase may not include a printed version.

The post IMG Stageline FLAT-M200 Active Stage Monitor appeared first on Sound Services.

Compact, lightweight, practical and yet amazingly powerful. The active speaker system FLAT-M100 is suitable for monitoring, side fill, front fill and rear fill applications due to its clear and powerful reproduction. It is also suitable wherever a powerful sound is required, despite limited space being available.

• Flat and very compact full range system
• Fitted with 2 x 10 cm (FaitalPRO, 2 x 4″) full range speaker with neodymium magnets
• Class D amplifier system
• Sound pressure at nominal power: 116 dB
• Indication of signal and limiter
• Volume control and tone control
• Balanced line/mic input and feed-through output
• High-quality multiplex wooden cabinet with protective metal grille
• 2 x M10 and 2 x M6 threaded inserts for stand adapter or mounting device
• Supplied with clamp for mounting, e.g. onto a microphone stand
• Active/passive: active
• Transmission method: cable
• Total output power: 200 W
• Power rating (RMS): 100 W
• Frequency range: 90-20,000 Hz
• Input signal: 16 mV/28 kΩ (line, balanced), 5 mV/20 kΩ (mic, balanced)
• System: 2 x 4″, full range
• Full range speaker: 2 x 10 cm (2 x 4″, FaitalPRO) full range speaker
• Number of speakers: 2
• Speaker size: 10 cm (4″)
• Sensitivity: 97 dB/W/m
• Max. rated SPL: 116 dB
• Housing material: multiplex
• Colour: black
• Mounting device: 2 x M10 threaded insert, 2 x M6 threaded insert
• Admissible ambient temperature: 0-40 °C
• Power supply: ˜ 230 V/50 Hz/175 VA
• Dimensions: 265 x 120 x 192.5 mm
• Weight: 2.4 kg
• Inputs: 1 x combination XLR/6.3 mm (line/mic)
• Outputs: 1 x XLR link out
• Other features limiter
• Accessories: FLAT-M100BAG

See the ‘User Manuals’ tab on the left of this page – as manufacturers are making instruction sheets and user manuals available for download only and your purchase may not include a printed version.

The post IMG Stageline FLAT-M100 Active Stage Monitor appeared first on Sound Services.

Classically styled guitar combo in a vinyl covered cabinet with metal corner protectors and basket-weave style grille cloth. Front control panel is recessed with retro “chicken-head” control knobs and additional features for Gain, EQ and outputs. Custom solid-state circuitry is voiced to produce authentic vintage-style clean and driven tones.

• Headphone output for practice
• Switchable clean and drive channels
• Classic styling
• Power supply: 230Vac, 50Hz (IEC)
• Output: 30Wrms
• Speaker: 250mm (10″)
• Controls: Clean volume, overdrive gain, volume, bass, middle, treble, reverb
• Connections: Guitar input, footswitch input, headphones out (6.3mm jack), aux in (RCA)
• Dimensions: 410 x 380 x 200 mm
• Weight: 12.5 kg

See the ‘User Manuals’ tab on the left of this page – as manufacturers are making instruction sheets and user manuals available for download only and your purchase may not include a printed version.

The post Chord CG-30 Guitar Amplifier appeared first on Sound Services.

The TOA MX-401 is a classic, compact, four channel self-powered mixeramplifier designed to deliver maximum features and performance in a cost-effective portable PA package – used

The MX-401 features four input channels, one program output, and one Foldback output. The internal amplifier is rated at 100 watts into an 8 ohm load, and 150 watts into 4 ohms. Each input channel has an electronically balanced XLR connector, and a highimpedance unbalanced 1/4″ phone jack. In addition, each channel features two-band EQ, a pre-EQ Foldback send, and post-EQ reverb send. The master control section features a patchable 5-band graphic equalizer, a quality 3- spring reverb, a full patch bay with 1/4″ phone auxiliary and RCA tape inputs, and master volume controls for Program, Foldback, and Reverb return to both. The power amp protection circuitry and autocomp compressor, both with LED’s, are also located in this section.

Classic 1990’s mixer amplifier – very clean condition

• Four input channels
• 100 watts into 8 ohms, 150 watts into 4 ohms
• Patchable 5-band graphic EQ
• Auto Comp compression unit w/LED
• Power amp protection circuitry w/LED
• Full patch bay
• Aux input w/level control, RCA jacks and parallel phone 1/4″ jacks
• Reverb level to PGM and FB
• Independent Foldback mixEach Channel
• Input level control
• Two band EQ
• Pre-EQ Foldback send
• Post-EQ Foldback send
• Low-Z electronically balanced XLR input
• Hi-Z unbalanced 1/4″ input
• Frequency Response: +0, -3dB 60Hz~20kHz (input LEVEL at “5” position)
• Total Harmonic Distortion: 0.05% +4dB* at 1kHz.
• Hum and Noise (Open)
  Equivalent Input Noise: -130dB* (20Hz ~ 20kHz)
  Equivalent Input Noise: -133dB* (IHF A)
  All level Controls Minimum: -110dB* (IHF A)
  PGM Master at MAX and all input level controls minimum: -90dB* (IHF A)
  PGM Master at MAX and one input level control at MAX: -70dB* (IHF A)
• Maximum Voltage Gain
  INPUT to PGM out: 64dB
  INPUT to FB out: 64dB
  INPUT to GEQ out: 64dB
  AUX to PGM out: 24dB
• Input EQ
  50Hz ±15dB Shelving
  20kHz ±15dB Shelving
• Equalization
  63Hz: ±12dB Peaking
  250kHz: ±12dB Peaking
  8kHz: ±12dB Peaking
  2kHz: ±12dB Peaking
  1kHz: ±12dB Peaking

These amplifiers do not have the Spring-line Reverb fitted.

All used and ex-display items are tried and tested before leaving our warehouse, but will have usage marks and some signs of wear – used, ex-display and clearance items include a 90 day return-to-base warranty.

See the ‘User Manuals’ tab on the left of this page – as manufacturers are making instruction sheets and user manuals available for download only and your purchase may not include a printed version.

The post TOA MX401 100w Powered Mixer – Used appeared first on Sound Services.

IMG Stageline DIB-100 DI box for an optimum signal transmission from musical instruments to a mixer or amplifier. By using a transformer coupling, interferences due to matching problems, e.g. hum loops, are prevented to a large extent. Input and output are galvanically isolated

The post IMG Stageline DIB-100 DI Box appeared first on Sound Services.