See the ‘User Manuals’ tab on the left of this page – as manufacturers are making instruction sheets and user manuals available for download only and your purchase may not include a printed version.

• 10 selectable chime settings
• Supplied with 2 x AA batteries and 1.0m USB power lead
• Supplied with 2.2m XLR to 6.3mm jack leadLead length
• Power supply: 5Vdc (USB lead supplied) or 2 x AA batteries (optional)
• Capsule: Electret condenser
• Chime function: 10 DIP switch settings (including off)
• Polar pattern: Cardioid:
• Sensitivity: -46dB ±2dB
• Frequency response: 50Hz – 20kHz
• Impedance: 680 Ohms
• Dimensions: 445 x 150 x 112mm
• Weight: 518g (inc. base)
• Connection: XLR output, DC5521 jack (power)

The post Adastra COM60 Paging Microphone with Chime Function appeared first on Sound Services.

• Electret, omnidirectional polar pattern
• Push-to-talk button and lock button
• Description: desktop microphone
• Transmission method: cable
• Polar pattern: omnidirectional
• System: electret
• Audio frequency range: 60-12,000 Hz
• Nominal impedance: 1 kΩ
• Sensitivity: 6 mV/Pa
• S/N ratio: > 40 dB
• Power supply: 1 x 1.5 V batt. AA size
• Admissible ambient temperature: 0-40 °C
• Dimensions:
  • 75 x 25 x 110 mm (console housing),
  • 200 mm (length of gooseneck)
• Weight: 298 g
• Cable: 3 m
• Connection: 6.3 mm plug

See the ‘User Manuals’ tab on the left of this page – as manufacturers are making instruction sheets and user manuals available for download only and your purchase may not include a printed version

The post Monacor ECM-200 Desk Paging Microphone appeared first on Sound Services.

The PM 200 is a dynamic paging microphone suitable for use with most public address mixer amplifiers.

• Remote paging microphone with built-in chime
• Dynamic microphone capsule
• Cardioid polar pattern
• Push to talk button
• Flexible gooseneck
• Connection: 3-Pin XLR
• Supplied with 3-Pin XLR to 6.35mm mono jack cable
• Powered either by 9V PP3 battery or optional 9V DC input (PSU not supplied – PSU required should be: 9V DC power supply with 3.5mm jack plug and tip positive/sleeve negative)
• Sensitivity: -63dB
• Frequency response: 50Hz-12kHz (-3dB)
• Polar pattern: Cardioid
• Output: 0.775V
• Impedance: 600Ω
• Power supply: 9V DC or PP3 battery
• Dimensions (H x W x D): 455 x 125 x 150mm
• Weight: 0.64kg

See the ‘User Manuals’ tab on the left of this page – as manufacturers are making instruction sheets and user manuals available for download only and your purchase may not include a printed version.

The post Clever Acoustics PM 200 Desk Microphone appeared first on Sound Services.

Approximately 400mm long gooseneck microphone with clamp assembly to fit to edge of a desk or lectern – this mic will work with most bodyworn wireless microphone transmitters to make your lectern fully portable and wireless.

• For use with wireless microphone transmitters
• Other transmitter cables available by request
• Kit includes gooseneck lectern mic, lectern or table ‘G’ clamp, mic swivel clamp and connector cable for wireless microphone transmitter
• Lectern or table ‘G’ clamp with standard 5/8″ thread available separately
• Sensitivity: -47dB ±3dB
• Frequency response: 60Hz- 15kHz
• Element: 9.7mmØ condenser
• Power: 1.5 to 9v DC bias
• Polar pattern: Cardioid
• Output impedance: 200Ω

• Product styles and colours may vary
• Due to current global supply chain disruption this item will be sourced from various manufacturers as available at the time of order processing

This microphone is not suitable for use with phantom power.

Please note that wireless microphone transmitters will only work with their matching wireless microphone receivers from that manufacturers matching range of equipment. Digital wireless microphone transmitters and receivers are not compatible with or suitable for use as spare components in older analogue wireless microphone systems and vice-versa.

Wireless microphone systems need to be connected to a public address PA sound system to work.

See the ‘User Manuals’ tab on the left of this page – as manufacturers are making instruction sheets and user manuals available for download only and your purchase may not include a printed version.

The post WPM300/TOA Gooseneck Microphone for Toa Wireless Beltpacks appeared first on Sound Services.

Approximately 400mm long gooseneck microphone with clamp assembly to fit to edge of a desk or lectern – this mic will work with most bodyworn wireless microphone transmitters to make your lectern fully portable and wireless.

• For use with wireless microphone transmitters
• Other transmitter cables available by request
• Kit includes gooseneck lectern mic, lectern or table ‘G’ clamp, mic swivel clamp and connector cable for wireless microphone transmitter
• Lectern or table ‘G’ clamp with standard 5/8″ thread available separately
• Sensitivity: -47dB ±3dB
• Frequency response: 60Hz- 15kHz
• Element: 9.7mmØ condenser
• Power: 1.5 to 9v DC bias
• Polar pattern: Cardioid
• Output impedance: 200Ω

• Product styles and colours may vary
• Due to current global supply chain disruption this item will be sourced from various manufacturers as available at the time of order processing

This microphone is not suitable for use with phantom power.

Please note that wireless microphone transmitters will only work with their matching wireless microphone receivers from that manufacturers matching range of equipment. Digital wireless microphone transmitters and receivers are not compatible with or suitable for use as spare components in older analogue wireless microphone systems and vice-versa.

Wireless microphone systems need to be connected to a public address PA sound system to work.

See the ‘User Manuals’ tab on the left of this page – as manufacturers are making instruction sheets and user manuals available for download only and your purchase may not include a printed version.

The post WPM300/XLR Gooseneck Microphone for IMG Stageline HSE Wireless Beltpacks appeared first on Sound Services.

Approximately 400mm long gooseneck microphone with clamp assembly to fit to edge of a desk or lectern – this mic will work with most bodyworn wireless microphone transmitters to make your lectern fully portable and wireless.

• Requires: 1.5 to 9v DC bias power
• For use with wireless microphone transmitters
• Other transmitter cables available by request
• Kit includes gooseneck lectern mic, lectern or table ‘G’ clamp, mic swivel clamp and connector cable for wireless microphone transmitter
• Lectern or table ‘G’ clamp with standard 5/8″ thread available separately
• Power: 1.5 to 9v DC bias
• Sensitivity: -47dB ±3dB
• Frequency response: 60Hz- 15kHz
• Element: 9.7mmØ condenser
• Polar pattern: Cardioid
• Output impedance: 200Ω

• Product styles and colours may vary
• Due to current global supply chain disruption this item will be sourced from various manufacturers as available at the time of order processing

This microphone is not suitable for use with phantom power.

Please note that wireless microphone transmitters will only work with their matching wireless microphone receivers from that manufacturers matching range of equipment. Digital wireless microphone transmitters and receivers are not compatible with or suitable for use as spare components in older analogue wireless microphone systems and vice-versa.

Wireless microphone systems need to be connected to a public address PA sound system to work.

See the ‘User Manuals’ tab on the left of this page – as manufacturers are making instruction sheets and user manuals available for download only and your purchase may not include a printed version.

The post WPM300/SX Gooseneck Microphone for Trantec, Sennheiser and IMG Stageline SX Wireless Beltpacks appeared first on Sound Services.

Approximately 400mm long gooseneck microphone with clamp assembly to fit to edge of a desk or lectern – this mic will work with most bodyworn wireless microphone transmitters to make your lectern fully portable and wireless.

• For use with wireless microphone transmitters
• Other transmitter cables available by request
• Kit includes gooseneck lectern mic, lectern or table ‘G’ clamp, mic swivel clamp and connector cable for wireless microphone transmitter
• Lectern or table ‘G’ clamp with standard 5/8″ thread available separately
• Sensitivity: -47dB ±3dB
• Frequency response: 60Hz- 15kHz
• Element: 9.7mmØ condenser
• Power: 1.5 to 9v DC bias
• Polar pattern: Cardioid
• Output impedance: 200Ω

• Product styles and colours may vary
• Due to current global supply chain disruption this item will be sourced from various manufacturers as available at the time of order processing

This microphone is not suitable for use with phantom power.

Please note that wireless microphone transmitters will only work with their matching wireless microphone receivers from that manufacturers matching range of equipment. Digital wireless microphone transmitters and receivers are not compatible with or suitable for use as spare components in older analogue wireless microphone systems and vice-versa.

Wireless microphone systems need to be connected to a public address PA sound system to work.

See the ‘User Manuals’ tab on the left of this page – as manufacturers are making instruction sheets and user manuals available for download only and your purchase may not include a printed version.

The post WPM300/J Gooseneck Microphone for Citronic and Chord Wireless Beltpacks appeared first on Sound Services.

The wired, Dante^®-enabled gooseneck microphone can conveniently be integrated into a Dante^® Audio over IP network and provides an excellent voice transmission for fixed installations in shops, hotels, in pubs and restaurants, in schools or indoor sports facilities. The installation is quite easy: the desktop microphone is connected to the network via the RJ45 jack and supplied with power via Ethernet cable (PoE). The free software ‘Dante^® Controller’ allows you to determine which Dante^®-enabled receiver is recipient of the routed audio signals. It is possible to transmit uncompressed and synchronised digital audio signals with virtually no latency. The touch-sensitive microphone button allows you to select the following operating modes: PTM, PTT, on/off and off/on. It is also possible to activate the 3-step attenuation which is separately selectable in case of high-volume signal sources.

System requirements Dante^®: Windows* 7/8.1/10 or MacOS 10.9.5/10.10.5/10.11

Click here for Audinate Dante® online training and certification

The post Monacor ECM-300DT Dante® Desk Paging Microphone appeared first on Sound Services.

The post Monacor ARM-880RCE Extension Module appeared first on Sound Services.

The Monacor ARM-880 system is a highly flexible PA solution for multi-room applications. It is ideally suited for applications in hotels, in restaurants and bars, in conference rooms, schools, sports facilities and fitness centres. Eight different audio sources, e.g. CD players, SAT receivers, radio programmes can be distributed to 8 output zones, assignment as required.
The audio matrix router ARM-880 is the centrepiece of the system. For operation, one amplifier is required for each output used. This may be an individual power amplifier or an active speaker system. Matching wall modules ARM-880WP1 and ARM-880WP2 for remote control of ARM-880 or with additional local inputs for the respective zone are available at option.
With a master/slave connection, it is possible to extend the system to up to 32 output zones. Connections for various alarm signals and a local microphone are available. Announcements can be made via 2 optional zone paging microphones ARM-880RC with zone selection.

The post Monacor ARM-880RC Zone Paging Microphone appeared first on Sound Services.