8-zone multifunctional mixing amplifier, class D technology with DSP and professional features for general multi-room PA applications. Clearly arranged graphical user interface HTML5 with extensive functions. Convenient operation via web browser regardless of the operating system used by the end-user device (PC, Mac, iOS, Android, etc.).

Note: after first switching on the device, the firmware must be updated to minimum version 1.6.4.

See the ‘User Manuals’ tab on the left of this page – as manufacturers are making instruction sheets and user manuals available for download only and your purchase may not include a printed version.

The post Monacor PA-8125DX 1,000W Mixer Amplifier appeared first on Sound Services.

4-zone multifunctional mixing amplifier, class D technology with DSP and professional features for general multi-room PA applications. Clearly arranged graphical user interface HTML5 with extensive functions. Convenient operation via web browser regardless of the operating system used by the end-user device (PC, Mac, iOS, Android, etc.).

• 4 x 125 W per zone (4/8 Ω) or 2 x 250 W (100 V)
• 100 V or 4/8 Ω operation
• 4 analogue inputs mic/line via plug-in screw terminal (bal.) or RCA jacks
• 1 digital input/output via S/PDIF RCA jacks
• 4 outputs (4/8 Ω) or 2 zone outputs (100 V) via plug-in screw terminal
• GPIO interface for remote volumen and standby
• Network connection via LAN or WLAN
• Convenient operation and configuration via user interface HTML5
• High-pass/low-pass filter with various filters
• Parametric equalizer
• Output with separate FIR filters
• Speaker matching: 10 ms
• Switchable output phase
• Adjustable compressor/limiter
• Adjustable delay
• Mix inputs
• Talkover with priority routing
• Built-in sine wave noise generator
• Parametric 5-band equalizer for input
• Protected against short circuit, DC voltage overload, undervoltage, excess temperature and overload

Specifications:

• Peak output power: 500 W
• Power rating: 500 W
• Power rating at 4 Ω: 4 x 125 W
• Power rating at 8 Ω: 4 x 125 W
• Power rating at 100 V: 2 x 250 W
• Channels: 5
• Zones: 4
• Inputs: 1.2 V, bal. (line), 1.9 mV, bal. (mic)
• Integrated limiter: yes
• Equalizer (bass, midrange and treble): all via DSP
• S/N ratio: > 106 dB
• THD: < 0.05%
• Power supply: ˜ 100-240 V/50-60 Hz/150 W
• Mains voltage: ~ 100-240 V
• Mains frequency: 50-60 Hz
• Power consumption
  • Operation: 150 W, 1/8 output power
  • Standby: < 0.5 W
• Admissible ambient temperature: 0-40 °C
• Width: 220 mm
• Height: 44 mm
• Depth: 320 mm
• Rack units, RU: 1
• Weight: 1.95 kg
• Connections:
  • 4 x RCA line
  • plug-in screw terminal (mic/line)
  • 2 x RCA (digital in/out)
  • plug-in screw terminal GPIO
  • plug-in screw terminal speakers
  • 1 x RJ45 network connection

Note: after first switching on the device, the firmware must be updated to minimum version 1.6.4.

See the ‘User Manuals’ tab on the left of this page – as manufacturers are making instruction sheets and user manuals available for download only and your purchase may not include a printed version.

The post Monacor PA-4125DX 500W Mixer Amplifier appeared first on Sound Services.

Digital speaker management systems which incorporate crossovers, EQ and limiters for multi-amplifier and speaker setups. These units enable the sound system designer to accurately control the inputs for each power amplifier, providing an ideal matched output suited to each speaker enclosure and its surroundings. A 96kHz 32-bit floating point DSP processor has been utilised to ensure professional quality resolution, controlled either directly via the front panel or USB using the included software. Control can also be distributed through LAN by connecting a local network to the rear panel RJ45 connector, enabling remote speaker setups throughout a building. A high quality speaker management system, which is straightforward enough to use for basic PA systems, yet with enough features to satisfy the most demanding sound reinforcement applications.

• Inputs: 8-band shelving or parametric EQ
• Inputs: Phase and Gain correction
• Outputs: Crossover types: L-R / Bessel / Butterworth
• Outputs: 8-band parametric EQ
• Outputs: Adjustable Limiter
• All inputs/outputs independently controlled
• USB interface with PC software included
• Network connectivity for remote control
• Software included for Win XP (PIII 500, 128MB RAM) or higher
• Inputs: 2 balanced XLR or AES digital
• Outputs: 6 balanced XLR
• Power supply: 115/230Vac, 50/60Hz (IEC)
• Power consumption: <25W
• Fuse: T315mA
• Crossover: HPF + LPF fully programmable per output
• Filter type: Linkwitz-Riley; Bessel; Butterworth.
• PC Com port: USB and LAN (RJ45)
• CMRR: 65dB (50Hz-10kHz)
• Input/output polarity: In phase (+) or reverse (-)
• Input EQ: 8-band parametric EQ
• Input Noise Gate: -120dBu to +10dBu
• Processor: 96kHz, 32-bit floating point DSP
• Mute: Any input or output channel
• Limiter: 1 per output (adjustable)
• Output EQ: 8-band: Hi/Lo-shelf or Para
• Delay: 0-650ms per output
• Frequency response: 20Hz-20kHz
• Input impedance : balanced: >10k Ohms
• Output impedance : balanced: <60 Ohms
• Dimensions: 482 x 44 x 220mm
• Weight: 3.19kg

Simply put, the Citronic DSM speaker management system controllers allow adjustments of the volume, bass, treble and other parameters of each audio amplifier channel of your sound system using an intuitive visual interface on a Windows (XP or later) PC or laptop when connected to the same network (LAN) using the supplied software enabling you to tailor the sound in a room, in an area or from just one loudspeaker to the surroundings and environment.

See the ‘User Manuals’ tab on the left of this page – as manufacturers are making instruction sheets and user manuals available for download only and your purchase may not include a printed version.

The post Citronic DSM26 Digital Management System appeared first on Sound Services.

The CEQ231 is a 19″ 2U rack mounted dual 31-band graphic equaliser, which allows the adjustment of labelled frequencies via the individual cut/boost faders. Up to 12dB of cut or boost for frequencies ranging from 20Hz to 20kHz for ultimate EQ control.

• 2 x 31-band 1/3 octave ISO spacing
• RF filtered servo-balanced inputs
• Constant Q each band
• Bypass switch for EQ comparison
• Low-cut switch each channel
• Gain control each channel
• LED VU meters
• 19″ rackmount 2U
• Power supply: 115/230Vac, 50/60Hz (IEC)
• Frequency response: 20Hz-20kHz
• Input impedance : balanced: 40k ohms
• Input impedance : unbalanced: 20k ohms
• Output impedance : bal/unbal: 330 ohms
• Channel separation: >50dB
• Signal to noise ratio: >102dB
• THD: 0.005%
• Dimensions: 482 x 88 x 138mm
• Weight: 3.3kg

See the ‘User Manuals’ tab on the left of this page – as manufacturers are making instruction sheets and user manuals available for download only and your purchase may not include a printed version.

The post Citronic CEQ231 Stereo Graphic Equaliser appeared first on Sound Services.

The CEQ215 is a 19″ rack mounted dual 15-band graphic equaliser, which allows the adjustment of labelled frequencies via the individual cut/boost faders. Up to 12dB of cut or boost for frequencies ranging from 25Hz to 16kHz for accurate audio spectrum control.

• 2 x 15-band 2/3 octave ISO spacing
• RF filtered servo-balanced inputs
• Constant Q each band
• Bypass switch for EQ comparison
• Low-cut switch each channel
• Gain control each channel
• LED VU meters
• 19″ rackmount 1U
• Power supply: 115/230Vac, 50/60Hz (IEC)
• Frequency response: 20Hz-20kHz
• Input impedance : balanced: 40k Ohms
• Input impedance : unbalanced: 20k Ohms
• Output impedance : bal/unbal: 330 Ohms
• Channel separation: >50dB
• Signal to noise ratio: >102dB
• THD: 0.005%
• Dimensions: 482 x 44 x 138mm
• Weight: 2.0kg

See the ‘User Manuals’ tab on the left of this page – as manufacturers are making instruction sheets and user manuals available for download only and your purchase may not include a printed version.

The post Citronic CEQ215 Stereo Graphic Equaliser appeared first on Sound Services.