Passive mono mixer with 6 balanced micro/line level input channels and 3 stereo auxiliaries. Microphone input with paging priority. Phantom power supply. Input level LED indicators. Suitable for PA and sound installations.

• Features:
  • Mixer/preamplifier
  • Microphone input with paging priority
  • Phantom power supply
  • LED output level indicators
• Inputs:
  • 6 balanced mics/lines
  • combo (XLR and 6.3 mm jack), 1,500 Ω 7.7 mV y 10,000 Ω 775 mV switchable
  • 3 stereo aux, 2 x RCA, 10,000 Ω 2.4 V RMS
• Outputs:
  • 1 balanced stereo master, XLR 120 Ω 775 mV RMS
  • 1 balanced mono master, 6.3 mm jack, 120 Ω 775 mV RMS
  • 1 balanced mono mix out, 6.3 mm jack 120 Ω 775 mV RMS
  • 1 line out, 2 x RCA 120 Ω 775 mV RMS
• Controls: Tone: master output bass, mid and treble
• Volume: inputs 1 to 12 and general volume (stereo and mono master)
• Frequency Response: 20-22,000 Hz
• Distortion: Harmonic: < 0.05% at 1 kHz
• S/N Ratio:
  • Microphones: > 103 dB
  • Aux/Line: > 103 dB
• Phantom Power: 18 V in mics. 1 to 6, selectable
• Priority: Mic. 1 depending on signal level, selectable
• Power Supply:
  • 230 V AC, 18 W and 24 V DC, 500 mA
  • 115 v AC on request
• Dimensions: 483 x 44 x 220 mm depth. 1 U 19″ rack
• Weight: 3 kg

See the ‘User Manuals’ tab on the left of this page – as manufacturers are making instruction sheets and user manuals available for download only and your purchase may not include a printed version.

The post Fonestar MX-848 Mixer appeared first on Sound Services.

• 4 x separate headphone amplifiers in one housing
• 1 x level control each per amplifier
• 6.3 mm stereo input
• 6.3 mm stereo outputs
• Description: headphone amplifier
• Frequency range: 20-20,000 Hz
• Input signal: 300 mV
• Output signal: 2 x 16 mW/8 Ω, 2 x 35 mW/32 Ω, 2 x 15 mW/600 Ω (per headphone)
• S/N ratio: 64 dB
• THD: 0.1%
• Admiss. ambient temp: 0-40 °C
• Power supply: via supplied plug-in power supply
• Dimensions: 117 x 93 x 40 mm
• Weight: 560 g

See the ‘User Manuals’ tab on the left of this page – as manufacturers are making instruction sheets and user manuals available for download only and your purchase may not include a printed version.

The post IMG Stageline PPA-4 4-Way Stereo Headphone Amplifier appeared first on Sound Services.

• 4 x separate headphone amplifiers in one housing
• 1 x level control each per amplifier
• 6.3 mm stereo input
• 6.3 mm stereo outputs
• Description: headphone amplifier
• Frequency range: 20-20,000 Hz
• Input signal: 300 mV
• Output signal: 2 x 16 mW/8 Ω, 2 x 35 mW/32 Ω, 2 x 15 mW/600 Ω (per headphone)
• S/N ratio: 64 dB
• THD: 0.1%
• Admiss. ambient temp: 0-40 °C
• Power supply: via supplied plug-in power supply
• Dimensions: 117 x 93 x 40 mm
• Weight: 560 g

All used and ex-display items are tried and tested before leaving our warehouse, but will have usage marks and some signs of wear – used, ex-display and clearance items include a 90 day return-to-base warranty

See the ‘User Manuals’ tab on the left of this page – as manufacturers are making instruction sheets and user manuals available for download only and your purchase may not include a printed version.

The post IMG Stageline PPA-4 4-Way Stereo Headphone Amplifier – Ex-display appeared first on Sound Services.

• 2 mic inputs
• Input sensitivity: 0.16-150 mV, switchable
• Input impedance: 4.4 kΩ (mic), 2.2 kΩ (line)
• Output signal:1-14 V (line, balanced), 1-7 V (line, stereo)
• Output impedance: 100 Ω / 600 Ω
• Gain: 15-75 dB (mic)
• Crossover frequency: 15-240 Hz, 6 dB/oct. (low cut), 15 Hz, 18 dB/oct. (subsonic)
• Low cut: 15-240 Hz, 6 dB/oct.
• S/N ratio: > 68 dB, unweighted (mic), 87 dB, unweighted (line)
• Gain, 11 steps 20-70dB
• LED green/red for operation/peak
• Phantom power +24V, can be switched on additionally
• Switchable microphone phase
• Lo cut 100Hz, hi cut 12kHz, 12dB/oct., switchable
• 1 pre-amplifier output
• 1 stereo line input
• 1 stereo line output
• Level control and panorama control for mixing the microphone signal to the stereo line channel
• Frequency range: 20-20,000 Hz
• THD: < 0.01%
• Power supply: via supplied plug-in PSU
• Dimensions: 116 x 55 x 135 mm
• Weight: 980 g
• Inputs: 2 x XLR (mic)
• Outputs: 2 x XLR (preamp), 1 x RCA L/R (line)

See the ‘User Manuals’ tab on the left of this page – as manufacturers are making instruction sheets and user manuals available for download only and your purchase may not include a printed version.

The post IMG Stageline MPA-202 Pre-Amplifier appeared first on Sound Services.

• 1 mic input
• Input sensitivity: 0.3-150 mV, switchable
• Input impedance: 2.2 kΩ (mic), 10 kΩ (line)
• Output signal:1-12 V (line, balanced), 1-6 V (line, stereo)
• Output impedance: 100 Ω
• Gain: 20-70 dB (mic), 0 db (line)
• Crossover frequency: 100 Hz/-3 dB, 12 dB/oct. (low cut), 12 kHz/-3 dB, 12 dB/oct. (high cut)
• Low cut: 100 Hz/-3 dB, 12 dB/oct.
• S/N ratio: > 66 dB, unweighted (mic), 80 dB, unweighted (line)
• Gain, 11 steps 20-70dB
• LED green/red for operation/peak
• Phantom power +24V, can be switched on additionally
• Switchable microphone phase
• Lo cut 100Hz, hi cut 12kHz, 12dB/oct., switchable
• 1 pre-amplifier output
• 1 stereo line input
• 1 stereo line output
• Level control and panorama control for mixing the microphone signal to the stereo line channel
• Frequency range: 20-20,000 Hz
• THD: < 0.01%
• Power supply: via supplied plug-in PSU, alternatively 4 x 9 V battery
• Dimensions: 116 x 55 x 125 mm
• Weight: 980 g
• Inputs: 1 x XLR (mic), 1 x RCA L/R (line)
• Outputs: 1 x XLR (preamp), 1 x RCA L/R (line)

See the ‘User Manuals’ tab on the left of this page – as manufacturers are making instruction sheets and user manuals available for download only and your purchase may not include a printed version.

The post IMG Stageline MPA-102 Pre-Amplifier appeared first on Sound Services.

This handy little box will amplify the signal from a turntable magnetic cartridge making it suitable for line level (AUX) input of your amplifier.

This item is battery operated to keep hum and noise levels to an absolute minimum.

See the ‘User Manuals’ tab on the left of this page – as manufacturers are making instruction sheets and user manuals available for download only and your purchase may not include a printed version.

• Stereo pre-amplifier for use with turntables and record decks fitted with magnetic cartridge
• Amplifies the signal to match it to the line or CD input of an amplifier
• On/Off switch fitted
• Power supply: 9Vdc, 300mA
• Battery (not supplied): 9Vdc (1 x PP3)
• Equalization: RIAA correction
• Frequency response: 30Hz – 20kHz
• Gain: 34dB
• Input impedance: 50k ohms
• Output impedance: 50k ohms
• Dimensions: 30 x 70 x 90mm
• Weight: 250g
• Product styles may vary

The post av:link STP-2 Stereo Pre-Amplifier appeared first on Sound Services.

Volume distortions or volume losses may occur when connecting smartphones, mobile phones, tablet PCs and MP3 players to an amplifier or a mixer. Due to the correct setting of impedance and gain, the SLA-35 is able to provide a better sound.

• Adjustable attenuation down to 1/10 (-20 dB) or gain up to 10-fold (+20 dB)
• Impedance switching Hi/Lo
• RCA and 3.5 mm stereo inputs and outputs
• Metal housing
• Supplied with plug-in PSU
• Type: impedance converter
• Frequency range: 3-50,000 Hz
• Input signal: 7 V max.
• Input impedance: 35 kΩ/8.1 kΩ (switch -5.6 dB)
• Output signal: max. 4.5 V/1.6 kΩ
• Gain: 0.1-10 (±20 dB) continuously adjustable, additionally -5.6 dB, switchable
• S/N ratio: > 83 dB
• Channel separation: > 68 dB
• THD: < 0.03%
• Admissible ambient temperature: 0-40 °C
• Power supply: via enclosed power supply
• Dimensions: 88 x 37 x 103 mm
• Weight: 450 g
• Inputs: 1 x RCA L/R, 1 x 3.5 mm jack
• Outputs: 1 x RCA L/R, 1 x 3.5 mm jack

See the ‘User Manuals’ tab on the left of this page – as manufacturers are making instruction sheets and user manuals available for download only and your purchase may not include a printed version.

The post Monacor SLA-35 Stereo Pre-Amplifier appeared first on Sound Services.

• 6 separate headphone amplifiers, each with 1 level control and 1 signal/clip LED as well as main/solo switching
• 1 input (solo) per amplifier, switchable to the common main input
• Main input with low/high selector switch for matching the input signal
• Inputs: solo (stereo) 6 x 6.3mm jack, main (stereo) 2 x 6.3mm jack, 2 x RCA L/R
• Outputs: headphones (stereo) 6 x 6.3mm jack
• Type: headphone amplifier
• Frequency range: 5-30,000 Hz
• Input signal: 250 mV/50 kΩ (solo), 250 mV/50 kΩ (main low), 2.2 V/60 kΩ (main high)
• Output signal: 2 x 16 mW/8 Ω, 2 x 45 mW/32 Ω, 2 x 75 mW/600 Ω
• S/N ratio: > 60 dB
• Channel separation: 50 dB
• THD: < 0.02%
• Admissible ambient temperature: 0-40 °C
• Power supply: ˜ 230 V/50 Hz/11 VA
• Dimensions: 482 x 44 x 185 mm, 1 RS
• Weight: 2.3 kg
• Inputs: 2 x RCA L/R (main), 2 x 6.3 mm jack (main), 6 x 6.3 mm jack (solo)
• Outputs: 6 x 6.3 mm jack (headphones)

See the ‘User Manuals’ tab on the left of this page – as manufacturers are making instruction sheets and user manuals available for download only and your purchase may not include a printed version.

The post IMG Stageline PPA-100/SW Stereo Headphone Amplifier appeared first on Sound Services.