True diversity UHF wireless microphone system with four individually programmable channels that sync to each transmitter to set the carrier frequency, EQ settings, transmission power, and even the display backlight colour for identification. Transmitters are available as either rugged handheld microphones with a high-quality dynamic capsule in a full metal housing or as a compact bodypack with a choice of neckband or lavalier microphones, all with fully balanced signal connection. Twin BNC antennas can be connected at the rear of the receiver or to the front panel when 19″ rack-mounted using the supplied BNC extension cables. All 4 channels are tuneable within the license-free UHF and regulated duplex gap bands, arranged in 8 groups of 8-16 carrier frequencies. Both receiver and transmitter settings are programmed via a front panel full colour TFT display with a rotary encoder for parameter adjustments. Each channel has a further backlit display that corresponds to the display on each transmitter and sync’s wirelessly via an IR connection, avoiding the complication of multiple controls on each transmitter. For uncompromising wireless performance, the TU4 has been designed to provide a reliable and adaptable system for stage performances, conferences, theatrical productions and other vocal duties.

• Independent 7-band EQ for each channel
• True diversity antennas with internal distro
• Auto frequency sweep function
• Individual XLR outputs or single mix jack output
• License-free operation (863-865MHz) in UK and EU regions
• Power supply: 12-18Vdc, 1000mA (mains adaptor supplied)
• Batteries: 2 x AA
• Carrier frequencies: 823-832 / 863-865MHz
• Wireless range: Up to 60m
• Antenna connection: BNC
• Dimensions:
  • Receiver 205 x 185 x 44mm (1U)
  • Handheld transmitter: 258 x 47mmØ
• Weight:
  • Receiver 0.935kg
  • Handheld transmitter: 354g (no battery)

See the ‘User Manuals’ tab on the left of this page – as manufacturers are making instruction sheets and user manuals available for download only and your purchase may not include a printed version.

The post Citronic TU1-H Wireless Microphone System appeared first on Sound Services.

True diversity UHF wireless microphone system with four individually programmable channels that sync to each transmitter to set the carrier frequency, EQ settings, transmission power, and even the display backlight colour for identification. Transmitters are available as either rugged handheld microphones with a high-quality dynamic capsule in a full metal housing or as a compact bodypack with a choice of neckband or lavalier microphones, all with fully balanced signal connection. Twin BNC antennas can be connected at the rear of the receiver or to the front panel when 19″ rack-mounted using the supplied BNC extension cables. All 4 channels are tuneable within the license-free UHF and regulated duplex gap bands, arranged in 8 groups of 8-16 carrier frequencies. Both receiver and transmitter settings are programmed via a front panel full colour TFT display with a rotary encoder for parameter adjustments. Each channel has a further backlit display that corresponds to the display on each transmitter and sync’s wirelessly via an IR connection, avoiding the complication of multiple controls on each transmitter. For uncompromising wireless performance, the TU4 has been designed to provide a reliable and adaptable system for stage performances, conferences, theatrical productions and other vocal duties.

• Independent 7-band EQ for each channel
• True diversity antennas with internal distro
• Auto frequency sweep function
• Individual XLR outputs or single mix jack output
• License-free operation (863-865MHz) in UK and EU regions
• Power supply: 12-18Vdc, 1000mA (mains adaptor supplied)
• Batteries: 4 x AA
• Carrier frequencies: 823-832 / 863-865MHz
• Wireless range: Up to 60m
• Antenna connection: BNC
• Dimensions:
  • Receiver 482 x 185 x 44mm (1U)
  • Handheld transmitter: 258 x 47mmØ
• Weight:
  • Receiver 1.500kg
  • Handheld transmitter: 354g (no battery)

See the ‘User Manuals’ tab on the left of this page – as manufacturers are making instruction sheets and user manuals available for download only and your purchase may not include a printed version.

The post Citronic TU2-H Wireless Microphone System appeared first on Sound Services.

True diversity UHF wireless microphone system with 1, 2, or 4 individually programmable channels that sync to each transmitter to set the carrier frequency, EQ settings, transmission power, and even the display backlight colour for identification. Transmitters are available as either rugged handheld microphones with a high-quality dynamic capsule in a full metal housing or as a compact bodypack with a choice of neckband or lavalier microphones, all with fully balanced signal connection. Twin BNC antennas can be connected at the rear of the receiver or to the front panel when 19″ rack-mounted using the supplied BNC extension cables. Each channel is tuneable within the license-free UHF and regulated duplex gap bands, arranged in 8 groups of 8-16 carrier frequencies. Both receiver and transmitter settings are programmed via a front panel full colour TFT display with a rotary encoder for parameter adjustments. Each channel has a further backlit display that corresponds to the display on each transmitter and sync’s wirelessly via an IR connection, avoiding the complication of multiple controls on each transmitter. For uncompromising wireless performance, the TU-series has been designed to provide a reliable and adaptable system for stage performances, conferences, theatrical productions and other vocal duties.

• Independent 7-band EQ for each channel
• True diversity antennas with internal distro
• Auto frequency sweep function
• Individual XLR outputs or single mix jack output
• License-free operation (863-865MHz) in UK and EU regions
• Additional ch.65 frequencies (823-832MHz) can be used with a PMSE license
• Bodypack versions supplied with both neckband and lavalier microphones
• 2 x AA batteries supplied per transmitter
• Power supply: 12-18Vdc, 1000mA (mains adaptor supplied)
• Receiver:
  • Weight: 1.500kg
• Beltpack transmitter
  • Weight: 74g (no battery)
  • Dimensions: 90 x 60 x 25mm
• Headworn microphone
  • Weight: 28g
  • Dimensions: 180 x 140 x 60mm
• Lavalier microphone
  • Weight: 23g
  • Dimensions: 27 x 12mmØ
• Handheld transmitter
  • Weight: 354g (no battery)
  • Dimensions: 258 x 47mmØ
• Batteries: 2 x AA per channel
• Carrier frequencies: 823-832 / 863-865MHz
• Wireless range: Up to 60m
• Antenna connection: 2 x BNC

See the ‘User Manuals’ tab on the left of this page – as manufacturers are making instruction sheets and user manuals available for download only and your purchase may not include a printed version.

The post Citronic TU2-C Wireless Microphone System appeared first on Sound Services.

True diversity UHF wireless microphone system with 1, 2, or 4 individually programmable channels that sync to each transmitter to set the carrier frequency, EQ settings, transmission power, and even the display backlight colour for identification. Transmitters are available as either rugged handheld microphones with a high-quality dynamic capsule in a full metal housing or as a compact bodypack with a choice of neckband or lavalier microphones, all with fully balanced signal connection. Twin BNC antennas can be connected at the rear of the receiver or to the front panel when 19″ rack-mounted using the supplied BNC extension cables. Each channel is tuneable within the license-free UHF and regulated duplex gap bands, arranged in 8 groups of 8-16 carrier frequencies. Both receiver and transmitter settings are programmed via a front panel full colour TFT display with a rotary encoder for parameter adjustments. Each channel has a further backlit display that corresponds to the display on each transmitter and sync’s wirelessly via an IR connection, avoiding the complication of multiple controls on each transmitter. For uncompromising wireless performance, the TU-series has been designed to provide a reliable and adaptable system for stage performances, conferences, theatrical productions and other vocal duties.

• Independent 7-band EQ for each channel
• True diversity antennas with internal distro
• Auto frequency sweep function
• Individual XLR outputs or single mix jack output
• License-free operation (863-865MHz) in UK and EU regions
• Additional ch.65 frequencies (823-832MHz) can be used with a PMSE license
• Bodypack versions supplied with both neckband and lavalier microphones
• 2 x AA batteries supplied per transmitter
• Power supply: 12-18Vdc, 1000mA (mains adaptor supplied)
• Receiver:
  • Weight: 1.513kg
• Beltpack transmitter
  • Weight: 74g (no battery)
  • Dimensions: 90 x 60 x 25mm
• Headworn microphone
  • Weight: 28g
  • Dimensions: 180 x 140 x 60mm
• Lavalier microphone
  • Weight: 23g
  • Dimensions: 27 x 12mmØ
• Handheld transmitter
  • Weight: 354g (no battery)
  • Dimensions: 258 x 47mmØ
• Batteries: 2 x AA per channel
• Carrier frequencies: 823-832 / 863-865MHz
• Wireless range: Up to 60m
• Antenna connection: 2 x BNC

See the ‘User Manuals’ tab on the left of this page – as manufacturers are making instruction sheets and user manuals available for download only and your purchase may not include a printed version.

The post Citronic TU4-C Wireless Microphone System appeared first on Sound Services.

True diversity UHF wireless microphone system with four individually programmable channels that sync to each transmitter to set the carrier frequency, EQ settings, transmission power, and even the display backlight colour for identification. Transmitters are available as either rugged handheld microphones with a high-quality dynamic capsule in a full metal housing or as a compact bodypack with a choice of neckband or lavalier microphones, all with fully balanced signal connection. Twin BNC antennas can be connected at the rear of the receiver or to the front panel when 19″ rack-mounted using the supplied BNC extension cables. All 4 channels are tuneable within the license-free UHF and regulated duplex gap bands, arranged in 8 groups of 8-16 carrier frequencies. Both receiver and transmitter settings are programmed via a front panel full colour TFT display with a rotary encoder for parameter adjustments. Each channel has a further backlit display that corresponds to the display on each transmitter and sync’s wirelessly via an IR connection, avoiding the complication of multiple controls on each transmitter. For uncompromising wireless performance, the TU4 has been designed to provide a reliable and adaptable system for stage performances, conferences, theatrical productions and other vocal duties.

• Independent 7-band EQ for each channel
• True diversity antennas with internal distro
• Auto frequency sweep function
• Individual XLR outputs or single mix jack output
• License-free operation (863-865MHz) in UK and EU regions
• Power supply: 12-18Vdc, 1000mA (mains adaptor supplied)
• Batteries: 8 x AA
• Carrier frequencies: 823-832 / 863-865MHz
• Wireless range: Up to 60m
• Antenna connection: BNC
• Dimensions:
  • Receiver 482 x 185 x 44mm (1U)
  • Handheld transmitter: 258 x 47mmØ
• Weight:
  • Receiver 1.513kg
  • Handheld transmitter: 354g (no battery)

See the ‘User Manuals’ tab on the left of this page – as manufacturers are making instruction sheets and user manuals available for download only and your purchase may not include a printed version.

The post Citronic TU4-H Wireless Microphone System appeared first on Sound Services.

This innovative wireless microphone system works in both deregulated license free Ch 70 and licensable Ch 65 – you will need a Ch 38 license from Ofcom when using Ch 65

Up to 12 channels may be used at the same time

System includes:

• 1 x TXS-900 receiver
• 2 x TXS-900HT handheld transmitters

TXS-920

• 2 frequency ranges (E band: 823-832 MHz – channel 38 license required and 863-865 MHz – license free)
• 442 selectable channels
• Intermodulation-free presets, 4 groups with 8 channels each
• 12 intermodulation-free channels max. can be used in parallel (autoscan)
• SYNC function for transmitting the selected frequency to pocket transmitter TXS-900HSE or hand-held microphone TXS-900HT via infrared signal
• Autoscan with intermodulation detection
• True diversity system with removable antennas (BNC connection)
• Pilot tone squelch
• Volume and squelch controls
• LCD for indicating group/channel, frequency, RF receiving level, AF audio level
• XLR output (balanced) and 6.3 mm output (unbalanced) for each channel, switchable mic/line
• 6.3 mm output for mixed signal (line)
• Receiver has robust metal housing
• Supplied with PSU for receiver
• 482 mm (19″) rack installation of receiver using supplied mounting brackets
• Audio frequency range: 80-18,000 Hz
• Channels: 2
• THD: < 1%
• Dynamic range: > 100 dB
• RF S/N ratio: > 100 dB
• Admissible ambient temperature: 0-40 °C
• Audio signal receiver: line: 75 mV, mic: 7 mV (jack, unbalanced) line: 150 mV, mic: 15 mV (XLR, balanced) 75 mV (mix)
• Width receiver: 420 mm
• Height receiver: 42 mm
• Depth receiver: 183 mm
• Weight receiver: 2.3 kg
• Connections receiver: 2 x XLR, balanced, 2 x 6.3 mm jack, unbalanced 1 x 6.3 mm jack, unbalanced (mix)

TXS-900H

• Hand-held microphone with integrated multifrequency transmitter with UHF PLL technology
• Cardioid condenser microphone cartridge
• 2 frequency ranges (E band: 823-832 MHz – channel 38 license required and 863-865 MHz – license free)
• SYNC function for the synchronisation with receivers TXS-900 and TXS-920
• Mute function
• LCD for indicating channel and battery status
• Power supply via 2 x 1.5 V battery AA size (not supplied)
• Polar pattern: cardioid
• Transmitting power: 10 mW
• Power supply: 2 x 1.5 battery AA size
• Operating time: > 15 h
• Audio frequency range: 80-18,000 Hz
• Admissible ambient temperature: 0-40 °C
• Dimensions: Ø 53 mm x 260 mm
• Weight: 250 g

Wireless microphone transmitters will only work with their matching wireless microphone receivers from that manufacturers matching range of equipment. Digital wireless microphone transmitters and receivers are not compatible with or suitable for use as spare components in older analogue wireless microphone systems and vice-versa

Wireless microphone systems need to be connected to a public address PA sound system to work

All used and ex-display items are tried and tested before leaving our warehouse, but will have usage marks and some signs of wear – used, ex-display and clearance items include a 90 day return-to-base warranty.

See the ‘User Manuals’ tab on the left of this page – as manufacturers are making instruction sheets and user manuals available for download only and your purchase may not include a printed version

The post IMG Stageline TXS-920HT/SET Wireless Microphone System – Ex-Demo appeared first on Sound Services.

DQM series wireless microphones are quad UHF handheld systems designed for the professional user and utilises a diversity, full width receiver for the ultimate in RF stability. It has a tuning bandwidth up to 8MHz can provide 110 selectable frequencies for the 606-614Mhz CH38 band. These systems offer crystal clear sound reproduction and rock solid reliability, along with outstanding vocal reproduction and stable wireless connectivity allowing freedom of movement on stage. Handheld transmitters feature ergonomic design with a rugged housing to stand up to the rigours of the road

The flexibility of the DQM 600H handheld system may be increased by purchasing the additional DQM 600BP beltpack transmitters

• UHF band, Phase Lock Loop (PLL) offering stable RF transmission
• Frequency groups and a group of users set their own frequencies and storage, multiple sets of compatible frequency presets
• OLED display offers a wide viewing angle while remaining bright in darkened conditions
• Frequency, Channel, RF and AF signal strength meters
• 1U rack metal housing with integrated brackets, include antenna cable interface for front-mount antenna
• Combined use Jog Dial button operation for fast menu navigation
• Integrated antenna splitter for reduced RF interference
• Balanced XLR output for each channel plus unbalanced mixed output
• Automatic frequency SCAN function
• IR infrared frequency synchronisation via infrared interface
• Noise locking
• Mute circuitry for reduced noise
• Flat frequency response: 50Hz-16KHz
• Dynamic, cardioid handheld microphone capsule
• 1U full width rack mount receiver
• Receiver specifications:
  Power supply: 14V 1.2A (adapter supplied)
  Dimensions (H x W x D): 45 x 482 x 215mm
  Weight: 2.0kg

DQM 600HT handheld transmitter

• Transmitter power: 10mW
• Current drain: Standard <130mA
• Display method: LED
• Pickup type: Cardioid dynamic cartridge
• Battery type: 2 x 1.5V AA (not supplied)
• Dimensions: 250 x 45 x 45mm
• Weight: 0.4kg

Wireless microphone transmitters will only work with their matching wireless microphone receivers from that manufacturers matching range of equipment. Digital wireless microphone transmitters and receivers are not compatible with or suitable for use as spare components in older analogue wireless microphone systems and vice-versa

In best conditions up to 8 x wireless microphone channels / 2 x DQM 600 systems can be used simultaneously in Channel 38 using this and additional equipment

Wireless microphone systems need to be connected to a public address PA sound system to work

See the ‘User Manuals’ tab on the left of this page – as manufacturers are making instruction sheets and user manuals available for download only and your purchase may not include a printed version

The post W Audio DQM 600H Wireless Microphone System appeared first on Sound Services.

DTM 600H twin wireless microphone system with 2 x handheld transmitters on Channel 38 (606-614 MHz) with 80 selectable frequencies these systems utilise a true diversity, full width 19″ rack mountable receiver for the ultimate in RF stability. Outstanding vocal reproduction and stable wireless connectivity allow freedom of movement on stage. These systems offer crystal clear sound reproduction and rock solid reliability. Metal bodied handheld transmitters feature ergonomic design with a rugged housing to stand up to the rigours of the road.

• Phase Lock Loop (PLL)
• IR sync facility for simple setup – NB: transmitter has to re-sync when you change configuration
• True diversity receiver
• 80 preset Ch 38 frequencies
• Large LCD receiver display including RF level, AF level, channel and frequency
• LCD transmitter display
• Auto frequency scanning and spectrum display
• Balanced XLR output for each channel plus unbalanced mixed output
• Frequency response (handheld): 40Hz-15kHz
• Transmitter battery configuration: 2 x 1.5V AA (not supplied)
• Audio output level: 400mV
• Dynamic range: 96dB
• Receiver power supply: 12V DC (mains adapter supplied)
• 1U full width rack mount receiver
• Removable receiver aerials

Wireless microphone transmitters will only work with their matching wireless microphone receivers from that manufacturers matching range of equipment. Digital wireless microphone transmitters and receivers are not compatible with or suitable for use as spare components in older analogue wireless microphone systems and vice-versa.

In best conditions up to 8 x wireless microphone channels / 4 x DTM 600 systems can be used simultaneously in Channel 38 using this and additional equipment.

Wireless microphone systems need to be connected to a public address PA sound system to work.

See the ‘User Manuals’ tab on the left of this page – as manufacturers are making instruction sheets and user manuals available for download only and your purchase may not include a printed version.

The post W Audio DTM 600H V2 Wireless Microphone System appeared first on Sound Services.

• 2 channel system
• 16 UHF channels controlled by the PHL-Synthesized system
• Frequency range: 673.000 – 696.775 MHz
• TXZZ640 handheld and TXZZ642 bodypack wireless transmitters also available separately
• Double squelch circuit to increase efficiency and linearity
• Efficient construction with low energy consumption
• High extension antennas to increase the operating distance

Equipment:

• 1 x handheld transmitter
• 1 x bodypack transmitter
• 1 x headset microphones
• 1 x clothing clip microphones
• 1 x audio cable
• 4 x 1.5V AA batteries

Technical specifications:

• Carrier frequency range 673.000 – 696.775 MHz
• Frequency response 100 -18000 Hz
• THD <1%
• MSR >dB
• Operating temperature -29 – 74?C
• S / N ratio >70dB
• Output level 0-300mV
• Sensitivity? -105dB
• Modulation FM
• RF out >10dBm
• Maximum deviation +/- 70KHz
• Power supply 2 x 1.5V AA batteries

Wireless microphone transmitters will only work with their matching wireless microphone receivers from that manufacturers matching range of equipment. Digital wireless microphone transmitters and receivers are not compatible with or suitable for use as spare components in older analogue wireless microphone systems and vice-versa.

Please note that a maximum of 6 x TXZZ622 or 3 x TXZZ640 / TXZZ642 wireless microphone systems can be used with a maximum of 12 x TXZZ640 handheld or TXZZ642 bodypack wireless transmitters at any one time.

Wireless microphone systems need to be connected to a public address PA sound system to work.

See the ‘User Manuals’ tab on the left of this page – as manufacturers are making instruction sheets and user manuals available for download only and your purchase may not include a printed version.

The post ZZiPP TXZZ622 Wireless Microphone System appeared first on Sound Services.

• 4 channel system
• 16 UHF channels controlled by the PHL-Synthesized system
• Frequency range: 673.000 – 696.775 MHz
• TXZZ640 handheld wireless transmitters
• Double squelch circuit to increase efficiency and linearity
• Efficient construction with low energy consumption
• High extension antennas to increase the operating distance

Equipment:

• 1 x 4 way 16-channel UHF receiver
• 4 x TXZZ640 handheld wireless transmitters
• 1 x Audio cable
• 1 x Power supply
• 8 x 1.5V AA batteries
• 1 x Instruction manual

System specifications:

• Battery charge may limit the operating range
• Carrier frequency range: 673.00 – 696.775 MHz
• Frequency response: 100 -18000 Hz
• THD: <1%
• Operating temperature: -29 – 74C
• S / N ratio: >70dB
• Output level: 0-300mV
• Sensitivity: -105dB
• Quad Receiver Dimensions: 394 x 205 x 52mm

Handheld Transmitter:

• Modulation: FM
• RF out: >10dBm
• Maximum deviation: +/- 70KHz
• Power supply: 2 x 1.5V AA batteries
• Dimensions: 250 x 51 x 51mm

Wireless microphone transmitters will only work with their matching wireless microphone receivers from that manufacturers matching range of equipment. Digital wireless microphone transmitters and receivers are not compatible with or suitable for use as spare components in older analogue wireless microphone systems and vice-versa.

Please note that a maximum of 6 x TXZZ622 or 3 x TXZZ640 / TXZZ642 wireless microphone systems can be used with a maximum of 12 x TXZZ640 handheld or TXZZ642 bodypack wireless transmitters at any one time.

Wireless microphone systems need to be connected to a public address PA sound system to work.

See the ‘User Manuals’ tab on the left of this page – as manufacturers are making instruction sheets and user manuals available for download only and your purchase may not include a printed version.

The post ZZiPP TXZZ640 Wireless Microphone System appeared first on Sound Services.