True diversity UHF wireless microphone system with four individually programmable channels that sync to each transmitter to set the carrier frequency, EQ settings, transmission power, and even the display backlight colour for identification. Transmitters are available as either rugged handheld microphones with a high-quality dynamic capsule in a full metal housing or as a compact bodypack with a choice of neckband or lavalier microphones, all with fully balanced signal connection. Twin BNC antennas can be connected at the rear of the receiver or to the front panel when 19″ rack-mounted using the supplied BNC extension cables. Channels are selectable for all 4 channels within the license-free UHF and duplex gap bands, arranged in 8 groups of 8-16 carrier frequencies. Both receiver and transmitter settings are programmed via a front panel full colour TFT display with a rotary encoder for parameter adjustments. Each channel has a further backlit display that corresponds to the display on each transmitter and sync’s wirelessly via an IR connection, avoiding the complication of multiple controls on each transmitter. For uncompromising wireless performance, the TU4 has been designed to provide a reliable and adaptable system for stage performances, conferences, theatrical productions and other vocal duties.

• Independent 7-band EQ for each channel
• True diversity antennas with internal distro
• Auto frequency sweep function
• Individual XLR outputs or single mix jack output
• License-free operation in UK and EU regions
• Additional ch.65 frequencies (823-832MHz) can be used with a PMSE license.
• Bodypack version supplied with both neckband and lavalier microphones
• Power supply: 12-18Vdc, 1000mA (mains adaptor supplied)
• Batteries: 4 x AA
• Carrier frequencies: 823-832 / 863-865MHz
• Wireless range: Up to 60m
• Antenna connection: BNC
• Beltpack transmitter:
  • Dimensions: 90 x 60 x 25mm
  • Weight: 74g (no battery)
• Headworn microphone:
  • Dimensions: 180 x 140 x 60mm
  • Weight: 28g
• Clothing clip microphone:
  • Dimensions: 27 x 12mmØ
  • Weight: 23g
• Receiver:
  • Dimensions: 205 x 185 x 44mm (1U)
  • Weight: 0.935kg

See the ‘User Manuals’ tab on the left of this page – as manufacturers are making instruction sheets and user manuals available for download only and your purchase may not include a printed version.

The post Citronic TU1-N Wireless Microphone System appeared first on Sound Services.

True diversity UHF wireless microphone system with four individually programmable channels that sync to each transmitter to set the carrier frequency, EQ settings, transmission power, and even the display backlight colour for identification. Transmitters are available as either rugged handheld microphones with a high-quality dynamic capsule in a full metal housing or as a compact bodypack with a choice of neckband or lavalier microphones, all with fully balanced signal connection. Twin BNC antennas can be connected at the rear of the receiver or to the front panel when 19″ rack-mounted using the supplied BNC extension cables. Channels are selectable for all 4 channels within the license-free UHF and duplex gap bands, arranged in 8 groups of 8-16 carrier frequencies. Both receiver and transmitter settings are programmed via a front panel full colour TFT display with a rotary encoder for parameter adjustments. Each channel has a further backlit display that corresponds to the display on each transmitter and sync’s wirelessly via an IR connection, avoiding the complication of multiple controls on each transmitter. For uncompromising wireless performance, the TU4 has been designed to provide a reliable and adaptable system for stage performances, conferences, theatrical productions and other vocal duties.

• Independent 7-band EQ for each channel
• True diversity antennas with internal distro
• Auto frequency sweep function
• Individual XLR outputs or single mix jack output
• License-free operation in UK and EU regions
• Additional ch.65 frequencies (823-832MHz) can be used with a PMSE license.
• Bodypack version supplied with both neckband and lavalier microphones
• Power supply: 12-18Vdc, 1000mA (mains adaptor supplied)
• Batteries: 4 x AA
• Carrier frequencies: 823-832 / 863-865MHz
• Wireless range: Up to 60m
• Antenna connection: BNC
• Beltpack transmitter:
  • Dimensions: 90 x 60 x 25mm
  • Weight: 74g (no battery)
• Headworn microphone:
  • Dimensions: 180 x 140 x 60mm
  • Weight: 28g
• Clothing clip microphone:
  • Dimensions: 27 x 12mmØ
  • Weight: 23g
• Receiver:
  • Dimensions: 482 x 185 x 44mm (1U)
  • Weight: 1.500kg

See the ‘User Manuals’ tab on the left of this page – as manufacturers are making instruction sheets and user manuals available for download only and your purchase may not include a printed version.

The post Citronic TU2-N Wireless Microphone System appeared first on Sound Services.

True diversity UHF wireless microphone system with 1, 2, or 4 individually programmable channels that sync to each transmitter to set the carrier frequency, EQ settings, transmission power, and even the display backlight colour for identification. Transmitters are available as either rugged handheld microphones with a high-quality dynamic capsule in a full metal housing or as a compact bodypack with a choice of neckband or lavalier microphones, all with fully balanced signal connection. Twin BNC antennas can be connected at the rear of the receiver or to the front panel when 19″ rack-mounted using the supplied BNC extension cables. Each channel is tuneable within the license-free UHF and regulated duplex gap bands, arranged in 8 groups of 8-16 carrier frequencies. Both receiver and transmitter settings are programmed via a front panel full colour TFT display with a rotary encoder for parameter adjustments. Each channel has a further backlit display that corresponds to the display on each transmitter and sync’s wirelessly via an IR connection, avoiding the complication of multiple controls on each transmitter. For uncompromising wireless performance, the TU-series has been designed to provide a reliable and adaptable system for stage performances, conferences, theatrical productions and other vocal duties.

• Independent 7-band EQ for each channel
• True diversity antennas with internal distro
• Auto frequency sweep function
• Individual XLR outputs or single mix jack output
• License-free operation (863-865MHz) in UK and EU regions
• Additional ch.65 frequencies (823-832MHz) can be used with a PMSE license
• Bodypack versions supplied with both neckband and lavalier microphones
• 2 x AA batteries supplied per transmitter
• Power supply: 12-18Vdc, 1000mA (mains adaptor supplied)
• Receiver:
  • Weight: 1.500kg
• Beltpack transmitter
  • Weight: 74g (no battery)
  • Dimensions: 90 x 60 x 25mm
• Headworn microphone
  • Weight: 28g
  • Dimensions: 180 x 140 x 60mm
• Lavalier microphone
  • Weight: 23g
  • Dimensions: 27 x 12mmØ
• Handheld transmitter
  • Weight: 354g (no battery)
  • Dimensions: 258 x 47mmØ
• Batteries: 2 x AA per channel
• Carrier frequencies: 823-832 / 863-865MHz
• Wireless range: Up to 60m
• Antenna connection: 2 x BNC

See the ‘User Manuals’ tab on the left of this page – as manufacturers are making instruction sheets and user manuals available for download only and your purchase may not include a printed version.

The post Citronic TU2-C Wireless Microphone System appeared first on Sound Services.

True diversity UHF wireless microphone system with 1, 2, or 4 individually programmable channels that sync to each transmitter to set the carrier frequency, EQ settings, transmission power, and even the display backlight colour for identification. Transmitters are available as either rugged handheld microphones with a high-quality dynamic capsule in a full metal housing or as a compact bodypack with a choice of neckband or lavalier microphones, all with fully balanced signal connection. Twin BNC antennas can be connected at the rear of the receiver or to the front panel when 19″ rack-mounted using the supplied BNC extension cables. Each channel is tuneable within the license-free UHF and regulated duplex gap bands, arranged in 8 groups of 8-16 carrier frequencies. Both receiver and transmitter settings are programmed via a front panel full colour TFT display with a rotary encoder for parameter adjustments. Each channel has a further backlit display that corresponds to the display on each transmitter and sync’s wirelessly via an IR connection, avoiding the complication of multiple controls on each transmitter. For uncompromising wireless performance, the TU-series has been designed to provide a reliable and adaptable system for stage performances, conferences, theatrical productions and other vocal duties.

• Independent 7-band EQ for each channel
• True diversity antennas with internal distro
• Auto frequency sweep function
• Individual XLR outputs or single mix jack output
• License-free operation (863-865MHz) in UK and EU regions
• Additional ch.65 frequencies (823-832MHz) can be used with a PMSE license
• Bodypack versions supplied with both neckband and lavalier microphones
• 2 x AA batteries supplied per transmitter
• Power supply: 12-18Vdc, 1000mA (mains adaptor supplied)
• Receiver:
  • Weight: 1.513kg
• Beltpack transmitter
  • Weight: 74g (no battery)
  • Dimensions: 90 x 60 x 25mm
• Headworn microphone
  • Weight: 28g
  • Dimensions: 180 x 140 x 60mm
• Lavalier microphone
  • Weight: 23g
  • Dimensions: 27 x 12mmØ
• Handheld transmitter
  • Weight: 354g (no battery)
  • Dimensions: 258 x 47mmØ
• Batteries: 2 x AA per channel
• Carrier frequencies: 823-832 / 863-865MHz
• Wireless range: Up to 60m
• Antenna connection: 2 x BNC

See the ‘User Manuals’ tab on the left of this page – as manufacturers are making instruction sheets and user manuals available for download only and your purchase may not include a printed version.

The post Citronic TU4-C Wireless Microphone System appeared first on Sound Services.

Available on license free Ch 70 with 4 switchable license free frequencies and fully synthesized PLL quartz tuning technology. The S4.04-SX wireless microphone system comes with a wireless beltpack, headworn microphone and a UHF wireless receiver.

• CH 0 – 863.150MHz
• CH 1 – 863.725MHz
• CH 2 – 864.150MHz
• CH 3 – 864.850MHz

All of these frequencies are on Channel 70 and are license free in the UK.

• Supplied with 1.5m XLR audio lead
• Clear and true transmission
• Receiver outputs: Balanced XLR socket -20 dBu for XLR mic inputs and Un-balanced 1/4″ jack socket +10 dBu for line / aux level inputs
• Average operating range: 30m
• Diversity receiver
• Adjustable squelch
• Receiver has robust metal housing
• Dynamic processor for crystal-clear sound

Wireless microphone transmitters will only work with their matching wireless microphone receivers from that manufacturers matching range of equipment. Digital wireless microphone transmitters and receivers are not compatible with or suitable for use as spare components in older analogue wireless microphone systems and vice-versa.

Up to 4 wireless microphone channels may be used simultaneously in Channel 70 using this and additional equipment.

Wireless microphone systems need to be connected to a public address PA sound system to work.

See the ‘User Manuals’ tab on the left of this page – as manufacturers are making instruction sheets and user manuals available for download only and your purchase may not include a printed version.

The post Trantec S4.04/SX Wireless Microphone System appeared first on Sound Services.

True diversity UHF wireless microphone system with four individually programmable channels that sync to each transmitter to set the carrier frequency, EQ settings, transmission power, and even the display backlight colour for identification. Transmitters are available as either rugged handheld microphones with a high-quality dynamic capsule in a full metal housing or as a compact bodypack with a choice of neckband or lavalier microphones, all with fully balanced signal connection. Twin BNC antennas can be connected at the rear of the receiver or to the front panel when 19″ rack-mounted using the supplied BNC extension cables. Channels are selectable for all 4 channels within the license-free UHF and duplex gap bands, arranged in 8 groups of 8-16 carrier frequencies. Both receiver and transmitter settings are programmed via a front panel full colour TFT display with a rotary encoder for parameter adjustments. Each channel has a further backlit display that corresponds to the display on each transmitter and sync’s wirelessly via an IR connection, avoiding the complication of multiple controls on each transmitter. For uncompromising wireless performance, the TU4 has been designed to provide a reliable and adaptable system for stage performances, conferences, theatrical productions and other vocal duties.

• Independent 7-band EQ for each channel
• True diversity antennas with internal distro
• Auto frequency sweep function
• Individual XLR outputs or single mix jack output
• License-free operation in UK and EU regions
• Bodypack version supplied with both neckband and lavalier microphones
• Power supply: 12-18Vdc, 1000mA (mains adaptor supplied)
• Batteries: 8 x AA
• Carrier frequencies: 823-832 / 863-865MHz
• Wireless range: Up to 60m
• Antenna connection: BNC
• Beltpack transmitter:
  • Dimensions: 90 x 60 x 25mm
  • Weight: 74g (no battery)
• Headworn microphone:
  • Dimensions: 180 x 140 x 60mm
  • Weight: 28g
• Clothing clip microphone:
  • Dimensions: 27 x 12mmØ
  • Weight: 23g
• Receiver:
  • Dimensions: 482 x 185 x 44mm (1U)
  • Weight: 1.513kg

See the ‘User Manuals’ tab on the left of this page – as manufacturers are making instruction sheets and user manuals available for download only and your purchase may not include a printed version.

The post Citronic TU4-N Wireless Microphone System appeared first on Sound Services.

This innovative wireless microphone system works in both deregulated license free Ch 70 and licensable Ch 65 – you will need a Ch 38 license from Ofcom when using Ch 65

Up to 12 channels may be used at the same time

System includes:

• 1 x TXS-900 receiver
• 1 x TXS-900HSE beltpack transmitter
• 1 x Cardioid condenser gooseneck microphone set with lectern ‘G’ clamp, gooseneck microphone clamp and gooseneck microphone to pack transmitter lead
• 1 x XLR lead

TXS-900

• 2 frequency ranges (E band: 823-832 MHz – channel 38 license required and 863-865 MHz – license free)
• 442 selectable channels
• Intermodulation-free presets, 4 groups with 8 channels each
• 12 intermodulation-free channels max. can be used in parallel (autoscan)
• SYNC function for transmitting the selected frequency to pocket transmitter TXS-900HSE or hand-held microphone TXS-900HT via infrared signal
• Autoscan with intermodulation detection
• True diversity system with removable antennas (BNC connection)
• Pilot tone squelch
• Volume and squelch controls
• LCD for indicating group/channel, frequency, RF receiving level, AF audio level
• XLR output (balanced) and 6.3 mm output (unbalanced) for each channel, switchable mic/line
• 6.3 mm output for mixed signal (line)
• Receiver has obust metal housing
• Supplied with PSU for receiver
• 482 mm (19″) rack installation of receiver using supplied mounting brackets
• Audio frequency range: 80-18,000 Hz
• THD: < 1%
• Dynamic range: > 100 dB
• RF S/N ratio: > 100 dB
• Admissible ambient temperature: 0-40 °C
• Audio signal receiver: line: 75 mV, mic: 7 mV (jack, unbalanced) line: 150 mV, mic: 15 mV (XLR, balanced)
• Width receiver: 200 mm
• Height receiver: 42 mm
• Depth receiver: 183 mm
• Weight receiver: 1.1 kg
• Connections receiver: 1 x XLR, balanced, 1 x 6.3 mm jack, unbalanced

TXS-900HSE

• 2 frequency ranges (E band: 823-832 MHz – channel 38 license required and 863-865 MHz – license free)
• SYNC function for the synchronisation with receivers TXS-900 and TXS-920
• Mute function
• Sensitivity can be adjusted in 3 steps
• LCD for indicating channel and battery status
• Belt clip
• Power supply via 2 x 1.5 V battery AA size (not supplied)
• Audio frequency range: 80-18,000 Hz
• Operating time: > 15 h
• Admissible ambient temperature: 0-40 °C
• Transmitting power: 10 mW
• Power supply transmitter: 2 x 1.5 V battery AA size
• Width transmitter: 65 mm
• Height transmitter: 110 mm
• Depth transmitter: 25 mm
• Weight transmitter: 90 g
• Connections transmitter: 1 x 3-pole mini XLR

WPM300/XLR

• • For use with wireless microphone transmitters
  • Kit includes gooseneck lectern mic, lectern or table ‘G’ clamp, mic #swivel clamp and connector cable for wireless microphone transmitter
  • Lectern or table ‘G’ clamp with standard 5/8″ thread available separately
  • Sensitivity: -47dB ±3dB
  • Frequency response: 60Hz- 15kHz
  • Element: 9.7mmØ condenser
  • Power: 1.5 to 9v DC bias
  • Polar pattern: Cardioid
  • Output impedance: 200Ω

Wireless microphone transmitters will only work with their matching wireless microphone receivers from that manufacturers matching range of equipment. Digital wireless microphone transmitters and receivers are not compatible with or suitable for use as spare components in older analogue wireless microphone systems and vice-versa

Wireless microphone systems need to be connected to a public address PA sound system to work

See the ‘User Manuals’ tab on the left of this page – as manufacturers are making instruction sheets and user manuals available for download only and your purchase may not include a printed version

The post IMG Stageline TXS-900/WPM Wireless Microphone System appeared first on Sound Services.

System incudes:

• 1  x S4.04 wireless microphone system
• 1 x Cardioid condenser gooseneck microphone
• 1 x Lectern ‘G’ clamp
• 1 x Gooseneck microphone clamp
• 1 x Gooseneck microphone to pack transmitter lead
• 1 x XLR-XLR lead to connect receiver to your amplifier or mixer

TXS-631SET

• Each system supplied with pocket transmitter, wireless microphone receiver and mains power supply for receiver
• License-free in the UK & EU
• True diversity UHF systems
• 80 selectable UHF deregulated channels (863-865 MHz) – license free Ch 70 in the UK & EU
• Up to 4 systems can be used at the same time
• ACT function for transmitting the selected frequency to the hand or pocket transmitter via infrared signal
• Automatic scan to ensure you use a clear frequency
• Volume and squelch controls
• Indication of channel, antenna A/B, ACT status and AF audio level on the receiver
• Indication of channel and battery status on transmitters
• Stable metal housing on receiver for rejection of RF noise etc.
• Audio frequency range: 50-18,000 Hz
• THD: < 0.5%
• Dynamic range: 120 dB
• RF S/N ratio: 105 dB
• Admissible ambient temperature: 0-40 °C
• Transmitting power: < 10 mW
• Operating range: ≈ 30 m
• Power supply transmitter: 2 x 1.5 V battery AA size
• Audio signal receiver: 350 mV/10 kΩ (jack) 25 mV/10 kΩ (XLR, balanced)
• Power supply receiver: via encl. plug-in power supply
• Receiver dimensions: 152 x 38 x 120 mm
• Receiver weight: 482 g
• Connections receiver: 1 x 6.3 mm jack, unbalanced  1 x XLR, balanced
• Transmitter dimensions: 62 x 105 x 25 mm
• Transmitter weight: 88 g

Wireless microphone transmitters will only work with their matching wireless microphone receivers from that manufacturers matching range of equipment. Digital wireless microphone transmitters and receivers are not compatible with or suitable for use as spare components in older analogue wireless microphone systems and vice-versa

Up to 4 wireless microphone channels may be used simultaneously in Channel 70 using this and additional equipment

Wireless microphone systems need to be connected to a public address PA sound system to work

See the ‘User Manuals’ tab on the left of this page – as manufacturers are making instruction sheets and user manuals available for download only and your purchase may not include a printed version

The post IMG Stageline TXS-631/WPM Wireless Microphone System appeared first on Sound Services.

System incudes:

• 1  x S4.04 wireless microphone system
• 1 x Cardioid condenser gooseneck microphone
• 1 x Lectern ‘G’ clamp
• 1 x Gooseneck microphone clamp
• 1 x Gooseneck microphone to pack transmitter lead
• 1 x XLR-XLR lead to connect receiver to your amplifier or mixer

Available on license free Ch 70 with 4 switchable license free frequencies and fully synthesized PLL quartz tuning technology. The S4.04-WPM wireless microphone system comes with a wireless beltpack, gooseneck lectern microphone and a UHF wireless receiver.

• CH 0 – 863.150MHz
• CH 1 – 863.725MHz
• CH 2 – 864.150MHz
• CH 3 – 864.850MHz

All of these frequencies are on Channel 70 and are license free in the UK.

• Supplied with 1.5m XLR audio lead
• Clear and true transmission
• Receiver outputs: Balanced XLR socket -20 dBu for XLR mic inputs and Un-balanced 1/4″ jack socket +10 dBu for line / aux level inputs
• Average operating range: 30m
• Diversity receiver
• Adjustable squelch
• Receiver has robust metal housing
• Dynamic processor for crystal-clear sound

Wireless microphone transmitters will only work with their matching wireless microphone receivers from that manufacturers matching range of equipment. Digital wireless microphone transmitters and receivers are not compatible with or suitable for use as spare components in older analogue wireless microphone systems and vice-versa.

Up to 4 wireless microphone channels may be used simultaneously in Channel 70 using this and additional equipment.

Wireless microphone systems need to be connected to a public address PA sound system to work.

See the ‘User Manuals’ tab on the left of this page – as manufacturers are making instruction sheets and user manuals available for download only and your purchase may not include a printed version.

The post Trantec S4.04/WPM Wireless Microphone System appeared first on Sound Services.

Available on license free Ch 70 with 4 switchable license free frequencies and fully synthesized PLL quartz tuning technology. The S4.04-L wireless microphone system comes with a wireless beltpack, clothing clip microphone and a UHF wireless receiver.

• CH 0 – 863.150MHz
• CH 1 – 863.725MHz
• CH 2 – 864.150MHz
• CH 3 – 864.850MHz

All of these frequencies are on Channel 70 and are license free in the UK.

• Clear and true transmission
• Receiver outputs: Balanced XLR socket -20 dBu for XLR mic inputs and Un-balanced 1/4″ jack socket +10 dBu for line / aux level inputs
• Average operating range: 30m
• Diversity receiver
• Adjustable squelch
• Receiver has robust metal housing
• Dynamic processor for crystal-clear sound

Wireless microphone transmitters will only work with their matching wireless microphone receivers from that manufacturers matching range of equipment. Digital wireless microphone transmitters and receivers are not compatible with or suitable for use as spare components in older analogue wireless microphone systems and vice-versa.

Up to 4 wireless microphone channels may be used simultaneously in Channel 70 using this and additional equipment.

Wireless microphone systems need to be connected to a public address PA sound system to work.

See the ‘User Manuals’ tab on the left of this page – as manufacturers are making instruction sheets and user manuals available for download only and your purchase may not include a printed version.

The post Trantec S4.04/L Wireless Microphone System appeared first on Sound Services.