LOSUB is designed to offer a high power subwoofer unit with compact dimensions compared with traditional subs. Employing a downward angled baffle, the LOSUB creates a pressure zone at ground level and ports this forward, meaning that the driver is positioned to operate in a smaller enclosure. Sitting on the ground, the cabinet is just 36cm high and has a 35mm pole mount for adding a satellite full-range speaker. This low profile also enables the cabinet to fit under or beside furnishings and in narrow spaces for installation. The input section has 2 independent inputs and outputs for stereo link to a pair of active tops in a 2.1 configuration and there is an adjustable low pass filter and boost function to provide the right amount of sub output as needed. Whether is it for space-saving during transit or storage or for building into discreet spaces for installation, the LOSUB provides hefty power without eating up all your room.

• Semi-directional ported design
• Compact dimensions
• Stereo in/out for 2.1 operation
• Power supply: 230Vac, 50Hz (IEC)
• Construction: MDF enclosure with polyurea finish
• Hardware: Routed handles & 35mm pole mount socket
• Amplifier construction: Class-D (fixed DSP)
• Inputs: 2 x balanced XLR / 6.3mm jack
• Outputs: 2 x balanced XLR
• Controls: Flat/boost, phase switch, frequency, subwoofer level
• Driver: 380mmØ (15″) sub woofer
• Voice coil: 75mmØ (3″)
• Magnet: 2.835kg (100oz)
• Output power:
  • RMS: 600W
  • Max: 1200W
• Frequency response: 40 – 120Hz
• Sensitivity @ 1W/1m: 96dB
• SPL max.: 127dB
• Dimensions: 550 x 480 x 360mm
• Weight: 24kg

See the ‘User Manuals’ tab on the left of this page – as manufacturers are making instruction sheets and user manuals available for download only and your purchase may not include a printed version.

The post Citronic LOSUB-15A Active Subwoofer appeared first on Sound Services.

Dual driver active subwoofer cabinet with internal amplifier for mobile and fixed sound reinforcement. Inputs and outputs for 2 channels can be used for independent signals, enabling a 2.1 system setup with 2 full-range cabinets. Each input has independent level control, giving the option of adjusting the sub content for either channel at will. Preset DSP control accurately filters low frequencies to the class-D amplifier section to drive the twin 10″ woofers up to 600Wrms output. A phase switch can be used to correct time-alignment or out-of-phase situations. This sub unit can be positioned flat to accept a 35mm pole to mount a full-range speaker or upright for a smaller footprint. The form factor of this cabinet also makes it ideal for discreet installation.

• Independent 2 channel in/out connection
• Narrow footprint for discreet installation
• 600Wrms class-D amplifier
• Power supply: 230Vac, 50Hz (IEC)
• Construction: 15mm MDF with durable polyurea finish
• Hardware: Integral carry handle & 35mm pole mount socket
• Amplifier construction: Class-D
• Inputs: 2 x balanced XLR / 6.3mm jack
• Outputs: 2 x balanced XLR
• Controls: Flat/boost, phase switch, frequency, subwoofer level
• Drivers: 2 x 250mmØ (10″) woofers
• Frequency response: 55 – 150Hz
• Output power rms: 600W
• Output power max.: 1200W
• Dimensions: 690 x 480 x 305mm
• Weight: 31.0kg

See the ‘User Manuals’ tab on the left of this page – as manufacturers are making instruction sheets and user manuals available for download only and your purchase may not include a printed version.

The post Citronic CASA-210BA Active Subwoofer appeared first on Sound Services.

Elevate your space with a wireless bass

The subwoofer is designed to be set up in minutes and seamlessly compatible with Omni speakers. Encased in a closed box, this subwoofer operates wirelessly, adding a robust bass element to enhance the depth of the sound produced by the speakers, thereby elevating the overall music experience. Its purposeful design ensures that it effortlessly integrates into the audio setup, contributing a rich and immersive quality to the auditory ambiance.

A perfect complement for businesses and stores aspiring to create a vibrant atmosphere, the subwoofer proves instrumental in generating a more upbeat vibe. Whether aiming to energize a retail space or enhance the ambiance, the subwoofer stands as an ideal audio solution for those who prioritize both convenience and a heightened musical encounter.

Wireless Smart Subwoofer 200 Watt high efficiency digital Class-D power amplification 10 Inch (250 mm) long stroke driver with extended linear excursion. Closed box design for optimum performance and extended low-frequency performance.

• All-in-one smart subwoofer (built-in 200 W amplifier and receiver)
• 25 cm (10″) bass speaker/driver of long excursion
• Closed cabinet design for optimum output power and extended bass reproduction
• Easy plug-and-play installation/connection to Spottune audio streamer STREAM
• Reliable and stable audio transmission in the frequency range of 1.9 GHz
• Active/passive: active
• Transmission technology: wireless
• Total output power: 300 W
• Power rating (RMS): 200 W, class D amplifier
• Frequency range: 20-200 Hz
• Number of speakers: 1
• Speaker size: 25 cm (10″)
• Max. rated SPL: 100 dB
• Radiation angle/beam angle: omnidirectional
• Housing material: plastic
• Admissible ambient temperature: 0-40 °C
• Power supply: ˜ 100-240 V/50-60 Hz
• Dimensions: 540 x 200 x 360 mm
• Width: 540 mm
• Height: 200 mm
• Depth: 360 mm
• Weight: 12.65 kg
• Inputs: mains cable
• Other features:
  • audio transmission: UHF band 1.8-1.9 GHz,
  • operating range: approx. 50-100 m
    depending on surrounding and place of application

Simple control at your fingertips!

Want full control by your hand? The Enterprise Cloud Service is the effortless solution that lets you have full control of your location(s). Here are just a few examples of what the cloud service can do:

• Manage music and volume across location(s)
• Edit and manage time routines
• Check connection to Omni speakers

If you would like to learn more about Spottune’s cloud please click here

Unsure of how many speakers to purchase? Ask Sound Services to calculate your project for you!

See the ‘User Manuals’ tab on the left of this page – as manufacturers are making instruction sheets and user manuals available for download only and your purchase may not include a printed version.

The post Spottune SUB Series Bass Speakers appeared first on Sound Services.

Lightweight yet powerful active subwoofer units with inbuilt class D amplifiers. Each cabinet is constructed from 15mm MDF with integral side handles for easy portability and 35mm socket to accommodate a mounting pole. The high flex sub driver is front-loaded with a protective steel grille to deliver powerful transients and add warmth to any sound system. The class D amplifier section has stereo line inputs and outputs to allow use either as a mono sub with stereo tops or a matching sub for each top speaker. Line inputs have a parallel Link output to pass the signal onto further active speakers and a pair of line outputs with switchable high pass filter to connect to active top cabinets. A phase switch is included to help avoid sound cancellation and time-align multiple speaker setups. Designed as a perfect match for the CASA series speakers and equally at home with other active full range cabinets.

• Compact and lightweight design
• 15mm MDF cabinets with hard-wearing paint finish
• 2 x side carry handles
• 35mm pole mount socket
• Power supply: 230Vac, 50Hz (IEC)
• Construction: 15mm MDF with durable texture paint finish
• Hardware: 2 x side carry handles + 35mm pole mount socket
• Amplifier : construction: Class D
• Line inputs: L+R balanced XLR
• Line outputs: L+R balanced XLR & L+R link XLR
• Controls: Output level, phase switch, high pass x-over (output)
• Sub driver: 450mm­­­Ø (18″)
• Voice coil: 75mmØ (3″)
• Output power : rms: 600W
• Output power : max.: 1100W
• Peak output: 2200W
• SPL max.: 124.0dB
• Frequency response: 45 – 150Hz
• Dimensions: 645 x 605 x 510mm
• Weight: 34.00kg

See the ‘User Manuals’ tab on the left of this page – as manufacturers are making instruction sheets and user manuals available for download only and your purchase may not include a printed version.

The post Citronic CASA-18BA Active Sub Cabinet Speaker appeared first on Sound Services.

Lightweight yet powerful active subwoofer units with inbuilt class D amplifiers. Each cabinet is constructed from 15mm MDF with integral side handles for easy portability and 35mm socket to accommodate a mounting pole. The high flex sub driver is front-loaded with a protective steel grille to deliver powerful transients and add warmth to any sound system. The class D amplifier section has stereo line inputs and outputs to allow use either as a mono sub with stereo tops or a matching sub for each top speaker. Line inputs have a parallel Link output to pass the signal onto further active speakers and a pair of line outputs with switchable high pass filter to connect to active top cabinets. A phase switch is included to help avoid sound cancellation and time-align multiple speaker setups. Designed as a perfect match for the CASA series speakers and equally at home with other active full range cabinets.

• Compact and lightweight design
• 15mm MDF cabinets with hard-wearing paint finish
• 2 x side carry handles
• 35mm pole mount socket
• Power supply: 230Vac, 50Hz (IEC)
• Construction: 15mm MDF with durable texture paint finish
• Hardware: 2 x side carry handles + 35mm pole mount socket
• Amplifier : construction: Class D
• Line inputs: L+R balanced XLR
• Line outputs: L+R balanced XLR & L+R link XLR
• Controls: Output level, phase switch, high pass x-over (output)
• Sub driver: 380mmØ (15″)
• Voice coil: 75mmØ (3″)
• Output power : rms: 450W
• Output power : max.: 900W
• Output power peak: 1800W
• Dimensions: 564 x 540 x 448mm
• Weight: 25.42kg

See the ‘User Manuals’ tab on the left of this page – as manufacturers are making instruction sheets and user manuals available for download only and your purchase may not include a printed version.

The post Citronic CASA-15BA Active Sub Cabinet Speaker appeared first on Sound Services.

Lightweight yet powerful active subwoofer units with inbuilt class D amplifiers. Each cabinet is constructed from 15mm MDF with integral side handles for easy portability and 35mm socket to accommodate a mounting pole. The high flex sub driver is front-loaded with a protective steel grille to deliver powerful transients and add warmth to any sound system. The class D amplifier section has stereo line inputs and outputs to allow use either as a mono sub with stereo tops or a matching sub for each top speaker. Line inputs have a parallel Link output to pass the signal onto further active speakers and a pair of line outputs with switchable high pass filter to connect to active top cabinets. A phase switch is included to help avoid sound cancellation and time-align multiple speaker setups. Designed as a perfect match for the CASA series speakers and equally at home with other active full range cabinets.

• Compact and lightweight design
• 15mm MDF cabinets with hard-wearing paint finish
• 2 x side carry handles
• 35mm pole mount socket
• Power supply: 230Vac, 50Hz (IEC)
• Construction: 15mm MDF with durable texture paint finish
• Hardware: 2 x side carry handles + 35mm pole mount socket
• Amplifier : construction: Class D
• Line inputs: L+R balanced XLR
• Line outputs: L+R balanced XLR & L+R link XLR
• Controls: Output level, phase switch, high pass x-over (output)
• Sub driver: 300mmØ (12″)
• Voice coil: 62mmØ (2.5″)
• Output power : rms: 350W
• Output power : max.: 700W
• Output power peak: 1400W
• Dimensions: 480 x 450 x 380mm
• Weight: 18.86kg

The post Citronic CASA-12BA Active Sub Cabinet Speaker appeared first on Sound Services.

Lightweight yet powerful active subwoofer units with inbuilt class D amplifiers. Each cabinet is constructed from 15mm MDF with integral side handles for easy portability and 35mm socket to accommodate a mounting pole. The high flex sub driver is front-loaded with a protective steel grille to deliver powerful transients and add warmth to any sound system. The class D amplifier section has stereo line inputs and outputs to allow use either as a mono sub with stereo tops or a matching sub for each top speaker. Line inputs have a parallel Link output to pass the signal onto further active speakers and a pair of line outputs with switchable high pass filter to connect to active top cabinets. A phase switch is included to help avoid sound cancellation and time-align multiple speaker setups. Designed as a perfect match for the CASA series speakers and equally at home with other active full range cabinets.

• Compact and lightweight design
• 15mm MDF cabinets with hard-wearing paint finish
• 2 x side carry handles
• 35mm pole mount socket
• Power supply: 230Vac, 50Hz (IEC)
• Construction: 15mm MDF with durable texture paint finish
• Hardware: 2 x side carry handles + 35mm pole mount socket
• Amplifier : construction: Class D
• Line inputs: L+R balanced XLR
• Line outputs: L+R balanced XLR & L+R link XLR
• Controls: Output level, phase switch, high pass x-over (output)
• Sub driver: 250mmØ (10″)
• Voice coil: 50mmØ (2″)
• Output power : rms: 250W
• Output power : max.: 500W
• Output power peak: 1000W
• Dimensions: 431 x 407 x 338mm
• Weight: 16.23kg

See the ‘User Manuals’ tab on the left of this page – as manufacturers are making instruction sheets and user manuals available for download only and your purchase may not include a printed version.

The post Citronic CASA-10BA Active Sub Cabinet Speaker appeared first on Sound Services.

Active sub cabinet with 8″ (20cm) reinforced driver and internal amplifier with active filter circuit. Inputs are on twin RCA or from a stereo amplifier on spring terminals (between amp and mid-top speakers). Cutoff frequency and Gain rotary controls can be adjusted as required. “Auto Off” function deactivates the amplifier when no incoming signal is detected to conserve energy.

See the ‘User Manuals’ tab on the left of this page – as manufacturers are making instruction sheets and user manuals available for download only and your purchase may not include a printed version.

• Integral amplifier with variable crossover
• Auto off function conserves energy
• Speaker level or line level inputs
• Power supply: 220-250Vac, 50/60Hz (Fig 8)
• Driver: 20cm (8″) reinforced cone
• Connections: Speaker level input terminals, RCA line level in
• Cut-off frequency: 45 – 150Hz
• Rated output power: 100W
• Peak output: 200W
• Frequency response: 50 – 250Hz
• Dimensions: 300 x 330 x 300mm
• Weight: 7.44kg

The post av:link M8S Subwoofer appeared first on Sound Services.