100 V line transformer and low impedance exponential loudspeaker. FONESTAR presents the VULKAN range of horn loudspeakers to provide a solution for a wide range of installations where it is required to send the sound signal with maximum efficiency. The horn loudspeakers of the VULKAN series are suitable for reproducing the frequency range of speech and sending messages over long distances.
Specially constructed with materials that are highly resistant to adverse weather conditions, and a design that gives them an IP-66 degree of protection against the ingress of dust and water. Suitable for outdoor use and marine environments. This loudspeaker has a selector switch for easy power selection. Features a 100 V line transformer, which facilitates connection in installations with long cable runs and many loudspeakers. It also features connection as a low impedance loudspeaker for direct connection to the amplifier in installations where a long cable run is not necessary.
The diffuser and mount are made of aluminium and are highly resistant to aggressive environments. For public address applications in open spaces, industrial facilities, sports facilities, car parks, etc.

• Features:
  • 100 V line transformer and low impedance exponential loudspeaker
  • Prepared for outdoor use with anti-corrosion materials
  • Protection against water
  • For long-range message playback
• Power: 50 W RMS
• Loudspeaker: 1 x compression driver
• Frequency response: 380-6,500 Hz (-10 dB)
• Impedance:
  • 50 W RMS@100 V (200 Ω)
  • 25 W RMS@100 V (400 Ω)
  • 12.5 W RMS@100 V (800 Ω)
  • 6.25 W RMS@100 V (1.600 Ω)
  • Low Z: 16 Ω
• Sensitivity: 109 dB @ 1 W/1 m
• Maximum sound pressure: 116 dB @ 15 W/1 m
• Dispersions:
  • H/V: 100º/100º@500Hz, 62º/62º@1kHz, 25º/25º@2kHz, 25º/25º@4kHz (-6 dB)
• Protections: IP-66 in compliance with EN 60529
• Material:
  • Aluminum diffuser and ABS back cover with high resistance to sun exposure
  • Aluminium mount
  • Stainless steel screws A2
• Switch: High Z and low Z selector
• Connection: 30 cm cable with stripped ends
• Temperature range: Operation: -25ºC ~ +55ºC
• Storage: -40ºC ~ +70ºC
• Humidity: <95%
• Colour: Grey (RAL 7035)
• Dimensions: 325 x 325 x 350 mm depth
• Weight: 2.6 kg

See the ‘User Manuals’ tab on the left of this page – as manufacturers are making instruction sheets and user manuals available for download only and your purchase may not include a printed version.

The post Fonestar VULKAN-51ST Horn Speaker appeared first on Sound Services.

PA horn speakers with 100V transformer offering several different power settings. The housing is moulded from high impact ABS material to offer maximum protection against physical or weather damage. Reflex loading and a conical flared aperture ensures efficient and directed sound delivery over large areas.

• IP66 rated weatherproof
• 100V rotary tapping selector
• Weight: 1.44kg
• Dimensions: 295 x 230mmØ
• SPL @ 1W/1m: 106dB
• Impedance: 4k / 2k / 1k / 670 Ohms
• Frequency response : ±3dB: 275Hz – 7kHz
• 100V line tappings: 2.5W, 5W, 10W, 15W
• Power handling : rms: 15W
• IP rating: IP66

The post Adastra MH15V Horn Speaker appeared first on Sound Services.

Protected against powerful water jets to IP66 with integral power selector switch these 100V line ABS horn speakers are for open-air events, industrial use, in workshops etc.

• Power rating: 30/15/10/5/3/1 W
• 100V line operation
• Weatherproof and IP66 tested
• Protected against powerful water jets
• Power selector switch
• For open-air events and industrial use etc.
• Material (housing/cabinet): ABS
• Protective class: IP66
• Weather resistance: yes
• Mounting facility: mounting bracket
• Features: power selector switch
• Admissible ambient temperature: -20 °C to +50 °C
• Frequency range: 250-16,000 Hz
• Sensitivity: 109 dB/W/m
• Dimensions: 290 x 215 x 260 mm
• Weight: 1.7 kg

See the ‘User Manuals’ tab on the left of this page – as manufacturers are making instruction sheets and user manuals available for download only and your purchase may not include a printed version.

The post Monacor IT-130 Horn Speaker appeared first on Sound Services.

Protected against powerful water jets to IP66 with integral power selector switch these 100V line ABS horn speakers are for open-air events, industrial use, in workshops etc.

• Power rating: 15/10/5/3/1 W
• 100V line operation
• Weatherproof and IP66 tested
• Protected against powerful water jets
• Power selector switch
• For open-air events and industrial use etc.
• Material (housing/cabinet): ABS
• Protective class: IP66
• Weather resistance: yes
• Mounting facility: mounting bracket
• Features: power selector switch
• Admissible ambient temperature: -20 °C to +50 °C
• Frequency range: 280-12,500 Hz
• Sensitivity: 108 dB/W/m
• Dimensions: 225 x 160 x 235 mm
• Weight: 1.3 kg

See the ‘User Manuals’ tab on the left of this page – as manufacturers are making instruction sheets and user manuals available for download only and your purchase may not include a printed version.

The post Monacor IT-115 Horn Speaker appeared first on Sound Services.

Protected against powerful water jets to IP66 with integral power selector switch these 100V line ABS horn speakers are for open-air events, industrial use, in workshops etc.

• Power rating: 10/5/3/1 W
• 100V line operation
• Weatherproof and IP66 tested
• Protected against powerful water jets
• Power selector switch
• For open-air events and industrial use etc.
• Material (housing/cabinet): ABS
• Protective class: IP66
• Weather resistance: yes
• Mounting facility: mounting bracket
• Features: power selector switch
• Admissible ambient temperature: -20 °C to +50 °C
• Frequency range: 315-12,500 Hz
• Sensitivity: 105 dB/W/m
• Dimensions: 175 x 130 x 185 mm
• Weight: 1.1 kg

See the ‘User Manuals’ tab on the left of this page – as manufacturers are making instruction sheets and user manuals available for download only and your purchase may not include a printed version.

The post Monacor IT-110 Horn Speaker appeared first on Sound Services.

SHD 60 screw on horn driver

High efficiency, screw-on, 100V horn driver suitable for use with most public address horn flares fitted with a 1 3/8” – 18TPI thread. Manufactured using a die-cast aluminium chassis with a durable plastic rear cover, the drivers feature a flying lead and selectable output wattage taps.

• Power (RMS): 60W
• Power taps: 20W, 40W, 60W
• Impedance: 500KΩ, 250Ω, 170Ω
• Sensitivity: 114dB (when coupled to a CRSP55 horn)
• Frequency response: 150Hz – 6kHz
• Dimensions: 138 x 130mmØ
• Weight: 2.5kg

HF 20 round 20″ horn flare

Constructed from rugged powder coated, spun aluminium these public address horn flares are suitable for outdoor paging across show grounds and large spaces. Designed to accept most screw-on drivers, the flares have 1 3/8” 18TPI female threads and are supplied with an adjustable mounting bracket.

• Dimensions: 400 x 518mmØ
• Weight: 1.9kg

Please note that these are supplied as separate items and will require some assembly.

See the ‘User Manuals’ tab on the left of this page – as manufacturers are making instruction sheets and user manuals available for download only and your purchase may not include a printed version.

The post Clever Acoustics SHD 60HF Horn Driver with HF 20 Horn Flare appeared first on Sound Services.

High efficiency, screw-on, 100V horn driver suitable for use with most public address horn flares fitted with a 1 3/8” – 18TPI thread. Manufactured using a die-cast aluminium chassis with a durable plastic rear cover, the drivers feature a flying lead and selectable output wattage taps.

• Power (RMS): 60W
• Power taps: 20W, 40W, 60W
• Impedance: 500KΩ, 250Ω, 170Ω
• Sensitivity: 114dB (when coupled to a CRSP55 horn)
• Frequency response: 150Hz – 6kHz
• Dimensions: 138 x 130mmØ
• Weight: 2.5kg

See the ‘User Manuals’ tab on the left of this page – as manufacturers are making instruction sheets and user manuals available for download only and your purchase may not include a printed version.

The post Clever Acoustics SHD 60 Screw On Horn Driver appeared first on Sound Services.

A weather resistant horn loudspeaker suitable for paging and voice reinforcement, the highly efficient design projects spoken word or warning tones delivering high intelligibility across its frequency response. Featuring ABS construction complete with metal mounting brackets, the sound projectors rugged build quality is ideal for installation into large open spaces such as sports venues, car parks and warehouses.

• Multiple power taps
• High intelligibility speech reproduction
• Rugged ABS enclosure
• Weather resistant construction suitable for outdoors
• Supplied with adjustable mounting bracket
• Input: 100V, 70V
• Power taps @ 100V: 15W, 30W
• Power taps @ 70V: 7.5W, 15W
• Impedance: 330Ω, 670Ω
• Sensitivity (1W/1m): 103dB (±3dB)
• Maximum SPL (Rated W/1m): 118dB
• Frequency response: 300Hz-16kHz
• Connections: Flying leads
• Dimensions: 210 x 282 x 290mm
• Weight: 2.1kg
• IP rating: IP66

See the ‘User Manuals’ tab on the left of this page – as manufacturers are making instruction sheets and user manuals available for download only and your purchase may not include a printed version.

The post Clever Acoustics HS 730 Horn Speaker appeared first on Sound Services.

A weather resistant horn loudspeaker suitable for paging and voice reinforcement, the highly efficient design projects spoken word or warning tones delivering high intelligibility across its frequency response. Featuring ABS construction complete with metal mounting brackets, the sound projectors rugged build quality is ideal for installation into large open spaces such as sports venues, car parks and warehouses.

• Multiple power taps
• High intelligibility speech reproduction
• Rugged ABS enclosure
• Weather resistant construction suitable for outdoors
• Supplied with adjustable mounting bracket
• Input: 100V, 70V
• Power taps @ 100V: 7.5W, 15W
• Power taps @ 70V: 3.75W, 7.5W
• Impedance: 1.3KΩ, 670Ω
• Sensitivity (1W/1m): 103dB (±3dB)
• Maximum SPL (Rated W/1m): 115dB
• Frequency response: 250Hz-8kHz
• Connections: Flying leads
• Dimensions: 165 x 221 x 235mm
• Weight: 1.6kg
• IP rating: IP66

See the ‘User Manuals’ tab on the left of this page – as manufacturers are making instruction sheets and user manuals available for download only and your purchase may not include a printed version.

The post Clever Acoustics HS 715 Horn Speaker appeared first on Sound Services.

PA horn speakers with 100V transformer offering several different power settings. The housing is moulded from high impact ABS material to offer maximum protection against physical or weather damage. Reflex loading and a rectangular flared aperture ensures efficient and directed sound delivery over large areas. High quality rectangular outdoor horn loudspeaker is suitable for 100v line sound systems only. IP66 rated and fitted with a sturdy mounting bracket, a 60cm length of double insulated connecting cable, aluminium voice coil, 100V line matching transformers and an integral rotary switch for selecting wattage tappings.

• Power rms: 40W
• Power max.: 60W
• Durable and weatherproof
• Rotary 100V tapping switch
• IP Rating: IP66
• Please be aware that the fixings are not suitable for harsh or marine enironments
• Frequency response: 180Hz – 7kHz (±3dB)
• 100V line tappings: 5 / 10 / 20 / 30 / 40W
• Impedance: 2k / 1k / 500 / 330 / 250 Ohms
• SPL @ 1W/1m: 113dB
• SPL @ rated power: 129dB
• Dimensions: 450 x 405 x 202mm
• Weight: 3.33kg

See the ‘User Manuals’ tab on the left of this page – as manufacturers are making instruction sheets and user manuals available for download only and your purchase may not include a printed version.

The post Adastra RH40V Horn Speaker appeared first on Sound Services.